Part 3. APPLICABILITY AND IMPLEMENTATION - Vehicle Standard (Australian Design Rule 45/01 – Lighting and Light Signalling Devices not Covered by ECE Regulations) 2006 - 3. APPLICABILITY AND IMPLEMENTATION | Zoe

CTHIn ForceLegislation

Vehicle Standard (Australian Design Rule 45/01 – Lighting and Light Signalling Devices not Covered by ECE Regulations) 2006

3. APPLICABILITY AND IMPLEMENTATION3. APPLICABILITY AND IMPLEMENTATION

Start here

Get a plain-English read of 3. APPLICABILITY AND IMPLEMENTATION

Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 45/01 – Lighting and Light Signalling Devices not Covered by ECE Regulations) 2006.

Ask Zoe about this section View in full context

3. APPLICABILITY AND IMPLEMENTATION

3.1. This ADR applies to the design and construction of vehicles as set out in the table below.
3.2. ‘External Cabin Lamps’ shall comply with the relevant requirements of this ADR.
3.3. The circumstances under which such lamps are mandatory, optional, alternative or prohibited are set out in ADR 13/...