Vehicle Standard (Australian Design Rule 38/04 – Trailer Brake Systems) 2013
1. MARKING REQUIREMENTS1. MARKING REQUIREMENTS
Start here
Get a plain-English read of 1. MARKING REQUIREMENTS
Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 38/04 – Trailer Brake Systems) 2013.
1. MARKING REQUIREMENTS
1.1 An example of markings for a mechanically controlled device in a trailer fitted with a compressed air ‘Brake System’ that meets clause 6.8.1 is shown below.
| Control data | Vehicle loading | Axle No. 2 load at the ground[kg] | Inlet pressure[kPa] | Nominal outlet pressure [kPa] |
|---|---|---|---|---|
| LadenUnladen | 70002000 | 600600 | 600240 |
1.2 An example of markings for an air pressure controlled device in a trailer fitted with a compressed air ‘Brake System’ that meets clause 6.8.2 is shown below.
| Control data | Vehicle loading | Axle No. 2 load at the ground[kg] | Suspension Pressure [kPa] | Nominal outlet pressure [kPa] |
|---|---|---|---|---|
| Inlet pressure [kPa] 600 | LadenUnladen | 70002000 | 300100 | 600240 |
NOTES
This compilation of Vehicle Standard (Australian Design Rule 38/04 – Trailer Brake Systems) 2013 includes all the instruments set out in the Table of Instruments. The Table of Amendments provides a history of clauses that have been amended, inserted or deleted.
Table of Instruments
| Name of Instrument | Registration Date | Commencement Date |
|---|---|---|
| Vehicle Standard (Australian Design Rule 38/04 – Trailer Brake Systems) 2013 | 13/01/2014F2014L00055 | 14/01/2014 |
| Vehicle Standard (Australian Design Rule 38/04 – Trailer Brake Systems) 2013 Amendment 1 | 16/09/2014F2014L01224 | 17/09/2014 |
| Vehicle Standard (Australian Design Rule 38/04 – Trailer Brake Systems) 2013 Amendment 2 | 29/05/2018F2018L00670 | 30/05/2018 |
Table of Amendments
| Clause affected | How affected | Amending instrument |
|---|---|---|