Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007
Annex 1 - AppendixAnnex 1 - Appendix
Start here
Get a plain-English read of Annex 1 - Appendix
Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007.
Annex 1 - Appendix
LIST OF VEHICLE DATA FOR THE PURPOSE OF REGULATION No. 90 APPROVALS */
- Description of the vehicle type: ...........................................
1.1. Trade name or mark of the vehicle, if available: ..............................
1.2. Vehicle category: ......................................................
1.3. Vehicle type according to Regulation No. 78 approval: .........................
1.4. Models or trade names of vehicles constituting the vehicle type, if
available: .............................................................
1.5. Manufacturer's name and address: .........................................
-
Make and type of brake linings: ...........................................
-
Minimum mass of vehicle: ...............................................
3.1. Distribution of mass of each axle (maximum value): ...........................
- Gross vehicle mass of vehicle: ............................................
4.1. Distribution of mass of each axle (maximum value): ...........................
-
Vmax ................ km/h
-
Tyre and wheel dimensions: ..............................................
-
Configuration of the independent braking systems: ............................
-
Specifications of brake valves (if applicable): ................................
8.1. Adjustment specifications of the load sensing valve: ...........................
8.2. Setting of pressure valve: ................................................
- Specification of brake: ..................................................
9.1. Disc brake type (e.g. number of pistons with diameter(s), ventilated or solid disc): ...
9.2. Drum brake type (e.g. simplex, with piston size and drum dimensions):............
- Master cylinder type and size (if applicable):.................................