Vehicle Standard (Australian Design Rule 3/03 – Seats and Seat Anchorages) 2006
Annex 8Annex 8
Start here
Get a plain-English read of Annex 8
Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 3/03 – Seats and Seat Anchorages) 2006.
Annex 8
DETERMINATION OF DIMENSION "a" OF HEAD RESTRAINT GAPS
Figure 1: Example of horizontal gaps Figure shows how the dimension of "a" gap in head restraint is measured
Figure 1: Example of horizontal gaps
Note: Section A-A is to be made in a point of the gap area which allows the maximum sphere intrusion, without exerting any load.
Figure 2. Example of vertical gaps Shows example of vertical gaps in a headrest and how the test sphere may impact one of them
Figure 2. Example of vertical gaps
Note: Section A-A is to be made in a point of the gap area which allows the maximum sphere intrusion, without exerting any load.