Vehicle Standard (Australian Design Rule 18/03 – Instrumentation) 2006
Annex 3Annex 3
Start here
Get a plain-English read of Annex 3
Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 18/03 – Instrumentation) 2006.
Annex 3
TEST OF SPEEDOMETER ACCURACY FOR CONFORMITY OF PRODUCTION
- Test conditions
The test conditions shall be as set out in paragraphs 5.2.1. to 5.2.6. of this Regulation.
- Requirements
The production shall be deemed to conform to this Regulation if the following relationship between the speed indicated on the display of the speedometer (V1) and the actual speed (V2) is observed:
In the case of vehicles of categories M and N:
0 ≤ (V1 – V2) ≤ 0.1 V2 + 6 km/h;
In the case of vehicles of categories L3, L4 and L5:
0 (V1 – V2) 0.1 V2 + 8 km/h;
In the case of vehicles of categories L1 and L2:
0 (V1 – V2) 0.1 V2 + 4 km/h.