Vehicle Standard (Australian Design Rule 18/02 – Instrumentation) 2006
1Vehicle Standard (Australian Design Rule 18/02 – Instrumentation) 2006
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 18/02 – Instrumentation) 2006.
Commonwealth Coat of Arms of Australia
Vehicle Standard (Australian Design Rule 18/02 – Instrumentation) 2006
I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.
Dated 10 August 2006
[SIGNED]
James Eric Lloyd
Minister for Local Government, Territories and Roads
CONTENTS
A. legislative provisions.............................................3
A.1. NAME OF STANDARD..........................................3
A.2. COMMENCEMENT.............................................3
A.3. REPEAL......................................................3
B. function and SCOPE.............................................3
C. APPLICABILITY AND IMPLeMENTATION........................3
C.1. Applicability Summary...........................................3
C.2. Applicability Table..............................................4
18.1. DEFINITIONS..................................................4
18.2. VISUAL INDICATORS FOR MA and LEP VEHICLES ONLY..........4
18.3. LOCATION OF VISUAL INDICATORS FOR MA and LEP VEHICLES
ONLY........................................................5
18.4. VISIBILITY OF VISUAL INDICATORS FOR MA and LEP VEHICLES
ONLY........................................................6
18.5. SPEEDOMETERS AND ODOMETERS (ALL VEHICLES).............7
A. legislative provisions
A.1. NAME OF STANDARD
A.1.1. This Standard is the Vehicle Standard (Australian Design Rule 18/02 –Instrumentation) 2006.
A.1.2. This Standard may also be cited as Australian Design Rule 18/02 —Instrumentation.
A.2. COMMENCEMENT
A.2.1. This Standard commences on the day after it is registered.
A.3. REPEAL
A.3.1. This Standard repeals each vehicle standard with the name Australian Design Rule 18/02 — Instrumentation that is:
made under section 7 of the Motor Vehicle Standards Act 1989; and
in force at the commencement of this Standard.
A.3.2. This Standard also repeals each instrument made under section 7 of the Motor Vehicle Standard Acts 1989 that creates a vehicle standard with the name Australian Design Rule 18/02 — Instrumentation, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this Standard.