1Vehicle Standard (Australian Design Rule 11/00 – Internal Sun Visors) 2006

Image unavailable in extracted text

Vehicle Standard (Australian Design Rule 11/0011/00 – Internal Sun Visors Internal Sun Visors) 200620062006

Compilation: Vehicle Standard (Australian Design Rule 11/00 – Internal Sun Visors) 2006 Compilation 1 (up to and including Amendment 11)

Compilation Date: 3rd July 2008

Compiled by: Vehicle Safety Standards, Department of Infrastructure, Transport, Regional Development and Local Government.

CONTENTS

1. legislative provisions..............................................

2. FUNCTION AND SCOPE.........................................

3. APPLICABILITY................................................

11.1 DEFINITIONS...................................................

11.2 GENERAL REQUIREMENTS.....................................

11.3 SPECIFIC REQUIREMENTS......................................

11.4 ALTERNATIVE STANDARDS....................................

NOTES ...............................................................

1. legislative provisions
   1. NAME OF STANDARD
      1. This Standard is the Vehicle Standard (Australian Design Rule 11/00 – Internal Sun Visors) 2006.
      2. This Standard may also be cited as Australian Design Rule 11/00 — Internal Sun Visors.
   2. COMMENCEMENT
      1. This Standard commences on the day after it is registered.
   3. REPEAL
      1. This Standard repeals each vehicle standard with the name Australian Design Rule 11/00 — Internal Sun Visors that is:

(a) made under section 7 of the Motor Vehicle Standards Act 1989; and

(b) in force at the commencement of this Standard.

1.3.2 This Standard also repeals each instrument made under section 7 of the Motor Vehicles Standard Act 1989 that creates a vehicle standard with the name Australian Design Rule 11/00 — Internal Sun Visors, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this Standard.

2. FUNCTION AND SCOPE

2.1 This Australian Design Rule (ADR) is part of the Australian motor vehicle standards system and is a national standard for the purposes of the Motor Vehicle Standards Act 1989.

2.2 The function of this Australian Design Rule is to specify requirements for internal ‘Sun Visors’ to reduce the injury potential of internal ‘Sun Visors’ and the adjacent vehicle structure.