Transport Operations (Road Use Management—Vehicle Standards and Safety) Regulation 2021
sch.1-sec.35Rear view mirrors—surfaces
Start here
Get a plain-English read of sch.1-sec.35
Turn the raw legal text into a practical explanation grounded in Transport Operations (Road Use Management—Vehicle Standards and Safety) Regulation 2021.
sch.1-sec.35 Rear view mirrors—surfaces
A rear vision mirror required to be fitted to the side of a motor vehicle with a GVM of more than 3.5t must have a reflecting surface of at least 150cm 2 . The reflecting surface of the rear vision mirrors that are required to be fitted to a motorbike or moped must be— each of the same curvature; and if convex—part of a notional sphere with a radius of at least 1.2m. (sch.1-sec.35-ssec.1) A rear vision mirror required to be fitted to the side of a motor vehicle with a GVM of more than 3.5t must have a reflecting surface of at least 150cm 2 . (sch.1-sec.35-ssec.2) The reflecting surface of the rear vision mirrors that are required to be fitted to a motorbike or moped must be— each of the same curvature; and if convex—part of a notional sphere with a radius of at least 1.2m.
- (a) each of the same curvature; and
- (b) if convex—part of a notional sphere with a radius of at least 1.2m.