sch.1-sec.24Vehicles subject to particular approvals

sch.1-sec.24 Vehicles subject to particular approvals

A vehicle need not comply with an ADR applied by section 21 (1) or 22 (1) if— despite noncompliance with the ADR— an approval was given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 10A (2) or (3) to place identification plates on vehicles of that type; or an approval is given under the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018 (Cwlth) , schedule 3 , item 4(2) or 6(2) in relation to vehicles of that type; and the vehicle complies with any conditions of the approval. A vehicle need not comply with an ADR applied by section 21 (1) or 22 (1) if— either— the vehicle was permitted to be supplied to the market under an approval given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 14A (1) ; or an approval is given under the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018 (Cwlth) , schedule 3 , item 11(2) in relation to the vehicle; and the vehicle complies with any conditions of the approval. A vehicle need not comply with an ADR applied by section 21 (1) or 22 (1) if— the vehicle was permitted to be used in transport in Australia under an approval given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 15 (2) ; and the vehicle complies with any conditions of the approval. (sch.1-sec.24-ssec.1) A vehicle need not comply with an ADR applied by section 21 (1) or 22 (1) if— despite noncompliance with the ADR— an approval was given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 10A (2) or (3) to place identification plates on vehicles of that type; or an approval is given under the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018 (Cwlth) , schedule 3 , item 4(2) or 6(2) in relation to vehicles of that type; and the vehicle complies with any conditions of the approval. (sch.1-sec.24-ssec.2) A vehicle need not comply with an ADR applied by section 21 (1) or 22 (1) if— either— the vehicle was permitted to be supplied to the market under an approval given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 14A (1) ; or an approval is given under the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018 (Cwlth) , schedule 3 , item 11(2) in relation to the vehicle; and the vehicle complies with any conditions of the approval. (sch.1-sec.24-ssec.3) A vehicle need not comply with an ADR applied by section 21 (1) or 22 (1) if— the vehicle was permitted to be used in transport in Australia under an approval given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 15 (2) ; and the vehicle complies with any conditions of the approval.

• (a) despite noncompliance with the ADR— (i) an approval was given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 10A (2) or (3) to place identification plates on vehicles of that type; or (ii) an approval is given under the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018 (Cwlth) , schedule 3 , item 4(2) or 6(2) in relation to vehicles of that type; and
• (i) an approval was given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 10A (2) or (3) to place identification plates on vehicles of that type; or
• (ii) an approval is given under the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018 (Cwlth) , schedule 3 , item 4(2) or 6(2) in relation to vehicles of that type; and
• (b) the vehicle complies with any conditions of the approval.
• (i) an approval was given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 10A (2) or (3) to place identification plates on vehicles of that type; or
• (ii) an approval is given under the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018 (Cwlth) , schedule 3 , item 4(2) or 6(2) in relation to vehicles of that type; and
• (a) either— (i) the vehicle was permitted to be supplied to the market under an approval given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 14A (1) ; or (ii) an approval is given under the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018 (Cwlth) , schedule 3 , item 11(2) in relation to the vehicle; and
• (i) the vehicle was permitted to be supplied to the market under an approval given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 14A (1) ; or
• (ii) an approval is given under the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018 (Cwlth) , schedule 3 , item 11(2) in relation to the vehicle; and
• (b) the vehicle complies with any conditions of the approval.
• (i) the vehicle was permitted to be supplied to the market under an approval given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 14A (1) ; or
• (ii) an approval is given under the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018 (Cwlth) , schedule 3 , item 11(2) in relation to the vehicle; and
• (a) the vehicle was permitted to be used in transport in Australia under an approval given under the repealed Motor Vehicle Standards Act 1989 (Cwlth) , section 15 (2) ; and
• (b) the vehicle complies with any conditions of the approval.