Transport Operations (Road Use Management—Vehicle Standards and Safety) Regulation 2021
sch.1-sec.15Application to vehicle or coupling complying with inconsistent ADR requirement
Start here
Get a plain-English read of sch.1-sec.15
Turn the raw legal text into a practical explanation grounded in Transport Operations (Road Use Management—Vehicle Standards and Safety) Regulation 2021.
sch.1-sec.15 Application to vehicle or coupling complying with inconsistent ADR requirement
A requirement of parts 4 to 10 does not apply to a vehicle if— the vehicle complies with a requirement of an ADR that applies to— the vehicle; or vehicles of the same class or type manufactured after the vehicle; and the ADR requirement corresponds to a requirement in parts 4 to 10 . As the second and third edition ADR do not apply to a vehicle built in 1968, the vehicle must comply with section 123 . If the owner of that type of vehicle modified the brakes so the vehicle did comply with the second edition ADR, a requirement in section 123 about the vehicle’s brakes that is inconsistent with the second edition ADR no longer applies to the vehicle. A requirement of part 11 does not apply to a coupling if— the coupling complies with a requirement of an ADR that applies to— the coupling; or couplings of the same class or type manufactured after the coupling; and the ADR requirement corresponds to a requirement in part 11 . Despite subsection (1) , a requirement of the following provisions applies to a vehicle instead of the corresponding ADR requirement— Paragraph is not used. See note to section 1 . section 44 (5) , (6) , (7) and (8) ; section 50 ; section 114 (4) . Paragraph is not used. See note to section 1 . In this section— vehicle includes a vehicle that has been modified to comply with the ADR requirement. sch 1 s 15 amd 2023 SL No. 83 s 26 (sch.1-sec.15-ssec.1) A requirement of parts 4 to 10 does not apply to a vehicle if— the vehicle complies with a requirement of an ADR that applies to— the vehicle; or vehicles of the same class or type manufactured after the vehicle; and the ADR requirement corresponds to a requirement in parts 4 to 10 . As the second and third edition ADR do not apply to a vehicle built in 1968, the vehicle must comply with section 123 . If the owner of that type of vehicle modified the brakes so the vehicle did comply with the second edition ADR, a requirement in section 123 about the vehicle’s brakes that is inconsistent with the second edition ADR no longer applies to the vehicle. (sch.1-sec.15-ssec.2) A requirement of part 11 does not apply to a coupling if— the coupling complies with a requirement of an ADR that applies to— the coupling; or couplings of the same class or type manufactured after the coupling; and the ADR requirement corresponds to a requirement in part 11 . (sch.1-sec.15-ssec.3) Despite subsection (1) , a requirement of the following provisions applies to a vehicle instead of the corresponding ADR requirement— Paragraph is not used. See note to section 1 . section 44 (5) , (6) , (7) and (8) ; section 50 ; section 114 (4) . Paragraph is not used. See note to section 1 . (sch.1-sec.15-ssec.4) In this section— vehicle includes a vehicle that has been modified to comply with the ADR requirement.
- (a) the vehicle complies with a requirement of an ADR that applies to— (i) the vehicle; or (ii) vehicles of the same class or type manufactured after the vehicle; and