sec.64Duties of manufacturers about dangerous goods compliance plates for portable tanks, MEGCs and tank vehicles

sec.64 Duties of manufacturers about dangerous goods compliance plates for portable tanks, MEGCs and tank vehicles

A person who manufactures a portable tank for use in the transport of dangerous goods must attach a dangerous goods compliance plate to the tank in accordance with— if the tank is not made of fibre reinforced plastic— chapter 6.7 of the ADG Code; or if the tank is made of fibre reinforced plastic— chapter 6.7 and section 6.9.2.10 of the ADG Code. Maximum penalty—40 penalty units. A person who manufactures an MEGC for use in the transport of dangerous goods must attach a dangerous goods compliance plate to the MEGC in accordance with chapter 6.7 of the ADG Code. Maximum penalty—40 penalty units. Subsection (1) does not apply to a person who manufactures a portable tank if— chapter 6.7 and, if applicable, section 6.9.2.10 of the ADG Code permit the marking of the tank instead of the attachment of a dangerous goods compliance plate; and the tank is marked as required by the provisions mentioned in paragraph (a) . A person who manufactures a tank vehicle for use in the transport of dangerous goods must attach a dangerous goods compliance plate to the vehicle in accordance with section 6.10.2.2 of the ADG Code. Maximum penalty—40 penalty units. s 64 amd 2023 SL No. 24 s 23 (sec.64-ssec.1) A person who manufactures a portable tank for use in the transport of dangerous goods must attach a dangerous goods compliance plate to the tank in accordance with— if the tank is not made of fibre reinforced plastic— chapter 6.7 of the ADG Code; or if the tank is made of fibre reinforced plastic— chapter 6.7 and section 6.9.2.10 of the ADG Code. Maximum penalty—40 penalty units. (sec.64-ssec.2) A person who manufactures an MEGC for use in the transport of dangerous goods must attach a dangerous goods compliance plate to the MEGC in accordance with chapter 6.7 of the ADG Code. Maximum penalty—40 penalty units. (sec.64-ssec.3) Subsection (1) does not apply to a person who manufactures a portable tank if— chapter 6.7 and, if applicable, section 6.9.2.10 of the ADG Code permit the marking of the tank instead of the attachment of a dangerous goods compliance plate; and the tank is marked as required by the provisions mentioned in paragraph (a) . (sec.64-ssec.4) A person who manufactures a tank vehicle for use in the transport of dangerous goods must attach a dangerous goods compliance plate to the vehicle in accordance with section 6.10.2.2 of the ADG Code. Maximum penalty—40 penalty units.

• (a) if the tank is not made of fibre reinforced plastic— chapter 6.7 of the ADG Code; or
• (b) if the tank is made of fibre reinforced plastic— chapter 6.7 and section 6.9.2.10 of the ADG Code.
• (a) chapter 6.7 and, if applicable, section 6.9.2.10 of the ADG Code permit the marking of the tank instead of the attachment of a dangerous goods compliance plate; and