sec.59Duties of manufacturers about compliance plates for portable tanks, MEGCs and tank vehicles

sec.59 Duties of manufacturers about compliance plates for portable tanks, MEGCs and tank vehicles

A person who manufactures a portable tank for use in the transport of dangerous goods must attach a compliance plate to the tank in accordance with— if the tank is not made of fibre reinforced plastic— chapter 6 .7 of the ADG Code; or if the tank is made of fibre reinforced plastic— chapter 6 .7 and section 6.9.2.10 of the ADG Code. Maximum penalty—40 penalty units. A person who manufactures an MEGC for use in the transport of dangerous goods must attach a compliance plate to the MEGC in accordance with chapter 6.7 of the ADG Code. Maximum penalty—40 penalty units. Subsection (1) does not apply to a person who manufactures a portable tank if— chapter 6.7 and, if applicable, section 6.9.2.10 of the ADG Code permit the marking of the tank instead of the attachment of a compliance plate; and the tank is marked as required by the provisions mentioned in paragraph (a) . A person who manufactures a tank vehicle for use in the transport of dangerous goods must attach a compliance plate to the vehicle in accordance with section 6.10.2.2 of the ADG Code. Maximum penalty—40 penalty units. s 59 amd 2023 SL No. 24 s 14 (sec.59-ssec.1) A person who manufactures a portable tank for use in the transport of dangerous goods must attach a compliance plate to the tank in accordance with— if the tank is not made of fibre reinforced plastic— chapter 6 .7 of the ADG Code; or if the tank is made of fibre reinforced plastic— chapter 6 .7 and section 6.9.2.10 of the ADG Code. Maximum penalty—40 penalty units. (sec.59-ssec.2) A person who manufactures an MEGC for use in the transport of dangerous goods must attach a compliance plate to the MEGC in accordance with chapter 6.7 of the ADG Code. Maximum penalty—40 penalty units. (sec.59-ssec.3) Subsection (1) does not apply to a person who manufactures a portable tank if— chapter 6.7 and, if applicable, section 6.9.2.10 of the ADG Code permit the marking of the tank instead of the attachment of a compliance plate; and the tank is marked as required by the provisions mentioned in paragraph (a) . (sec.59-ssec.4) A person who manufactures a tank vehicle for use in the transport of dangerous goods must attach a compliance plate to the vehicle in accordance with section 6.10.2.2 of the ADG Code. Maximum penalty—40 penalty units.

• (a) if the tank is not made of fibre reinforced plastic— chapter 6 .7 of the ADG Code; or
• (b) if the tank is made of fibre reinforced plastic— chapter 6 .7 and section 6.9.2.10 of the ADG Code.
• (a) chapter 6.7 and, if applicable, section 6.9.2.10 of the ADG Code permit the marking of the tank instead of the attachment of a compliance plate; and
• (b) the tank is marked as required by the provisions mentioned in paragraph (a) .