sec.210Operating and testing analogue speed camera systems

sec.210 Operating and testing analogue speed camera systems

If an analogue speed camera system is used to provide evidence of a prescribed offence, the following provisions must be complied with— the system’s camera must be positioned and aimed to ensure an image made by the system depicts the front or rear of the vehicle the speed of which was measured by the system; each person who inserts into or removes a film magazine from the camera, or who relocates the camera with a film magazine in place, or who changes information programmed into the system, must— ensure the camera is correctly positioned and aimed; and use the system’s testing mode to ensure the camera operates correctly; and if a fault is indicated, take corrective action and repeat the testing process until no fault is indicated by the system in its testing mode; if the tests or the film when developed indicate a fault has affected the proper operation of the system as required under this section, the film must be rejected for evidentiary purposes. s 210 prev s 210 ins 1993 SL No. 294 s 7 om 1994 SL No. 232 s 40 pres s 210 ins 1996 SL No. 88 s 38 sub 1997 SL No. 99 s 41 amd 2010 SL No. 41 s 6 ; 2021 SL No. 102 s 26 sch 1

• (a) the system’s camera must be positioned and aimed to ensure an image made by the system depicts the front or rear of the vehicle the speed of which was measured by the system;
• (b) each person who inserts into or removes a film magazine from the camera, or who relocates the camera with a film magazine in place, or who changes information programmed into the system, must— (i) ensure the camera is correctly positioned and aimed; and (ii) use the system’s testing mode to ensure the camera operates correctly; and (iii) if a fault is indicated, take corrective action and repeat the testing process until no fault is indicated by the system in its testing mode;
• (i) ensure the camera is correctly positioned and aimed; and
• (ii) use the system’s testing mode to ensure the camera operates correctly; and
• (iii) if a fault is indicated, take corrective action and repeat the testing process until no fault is indicated by the system in its testing mode;
• (c) if the tests or the film when developed indicate a fault has affected the proper operation of the system as required under this section, the film must be rejected for evidentiary purposes.
• (i) ensure the camera is correctly positioned and aimed; and
• (ii) use the system’s testing mode to ensure the camera operates correctly; and
• (iii) if a fault is indicated, take corrective action and repeat the testing process until no fault is indicated by the system in its testing mode;