Tradesmen's Rights (No. 2) Regulations
(c) Marker-off (engineering);(c) Marker-off (engineering);
Start here
Get a plain-English read of (c) Marker-off (engineering);
Turn the raw legal text into a practical explanation grounded in Tradesmen's Rights (No. 2) Regulations.
Commonwealth Coat of Arms of Australia
Statutory Rules
1973 No. 51
REGULATIONS UNDER THE TRADESMEN’S RIGHTS REGULATION ACT 1946-1966.*
I, THE GOVERNOR-GENERAL in and over the Commonwealth of Australia, acting with the advice of the Federal Executive Council, hereby make the following Regulations under the Tradesmen’s Rights Regulation Act 1946-1966.
Dated this eighth day of March, 1973.
PAUL HASLUCK
Governor-General.
By His Excellency’s Command,
CLYDE R. CAMERON
Minister of State for Labour.
TRADESMEN’S RIGHTS (No. 2) REGULATIONS
Citation.
- These Regulations may be cited as the Tradesmen’s Rights (No. 2) Regulations.
Definition.
- In these Regulations, “the Act” means the Tradesmen’s Rights Regulation Act 1946-1966.
Engineering trades.
- (1) Part II of the Act ceases to apply to the trades in which persons are employed in any of the following classifications:—
(a) Toolsetter;
(b) Fitter, turbine blade;
(c) Marker-off (engineering);
(d) Wetstone grinder and glazer (tradesman);
(e) Motor tuner and tester;
(f) Key-setting machinist;
(g) Assembler, engine (aircraft);
(h) Checker (aircraft);
(i) Jigmaker (metal-aircraft);
(j) Template Maker (metal-aircraft);
(k) Optical finisher employed by the Department of Munitions;
(l) Optical tradesman employed by the Department of Munitions; and
(m) Optical worker employed by the Department of Munitions.
(2) Part II of the Act applies to the trades in which persons are employed in the classification machine setter.
* Notified in the Commonwealth Gazette on 15 March 1973.
Boilermaking trades.
- Part III of the Act ceases to apply to the trades in the industries of boiler-making, ship-building, ship-repairing and structural iron and Steel work in which persons are employed in any of the following classifications:—
(a) Boilersmith;
(b) Driller using portable machines; and
(c) Plate setter and frame bender.
Blacksmithing trades.
- (1) Part IV of the Act ceases to apply to the trades in which persons are employed in either of the following classifications:—