1Trade Practices (Consumer Product Safety Standards) (Children's Nightwear and Paper Patterns for Children's Nightwear) Regulations 2007

--- meta-content-style-type: text/css meta-content-type: application/xhtml+xml; charset=utf-8 title: Trade Practices (Consumer Product Safety Standard) (Children’s nightwear and limited daywear and paper patterns for children’s nightwear) Regulations 2006 --- ?xml version="1.0" encoding="utf-8" standalone="no"?>  Trade Practices (Consumer Product Safety Standards) (Children’s Nightwear and Paper Patterns for Children’s Nightwear) Regulations 20071 Select Legislative Instrument 2007 No. 21 I, PHILIP MICHAEL JEFFERY, Governor‑General of the Commonwealth of Australia, acting with the advice of the Federal Executive Council, make the following Regulations under the Trade Practices Act 1974. Dated 15 February 2007 P. M. JEFFERY Governor‑General By His Excellency’s Command CHRIS PEARCE Parliamentary Secretary to the Treasurer Contents  1 Name of Regulations   2 Commencement   3 Definition   4 Purpose   5 Standard for children’s nightwear until 29 February 2008   6 Standard for children’s nightwear from 1 March 2008   7 Standard for paper patterns for children’s nightwear until 29 February 2008               8 Standard for paper patterns for children’s nightwear from 1 March 2008              Schedule 1 Australian/New Zealand Standards for children’s nightwear              Part 1 AS/NZS 1249:1999  Part 2 Variations to AS/NZS 1249:1999  Part 3 AS/NZS 1249:2003  Part 4 Variations to AS/NZS 1249:2003  Schedule 2 Australian/New Zealand Standards for paper patterns for children’s nightwear              Part 1 AS/NZS 1249:1999  Part 2 Variations to AS/NZS 1249:1999  Part 3 AS/NZS 1249:2003  Part 4 Variations to AS/NZS 1249:2003            1 Name of Regulations   These Regulations are the Trade Practices (Consumer Product Safety Standards) (Children’s Nightwear and Paper Patterns for Children’s Nightwear) Regulations 2007. 2 Commencement   These Regulations commence on 1 March 2007. 3 Definition In these Regulations: children’s nightwear:  (a) means a garment that:  (i) is of a size in the range 00 to 14 (the number scheme used in AS 1182:1997 — Size coding scheme for infants’ and children’s clothing — Underwear and outerwear, published by Standards Australia on 5 March 1997); and  (ii) is of a type that is suitable for nightwear; and  (iii) is not a second‑hand garment; and  (b) includes a garment that is mentioned in:  (i) paragraphs (a) to (d) of clause 0.2 of Australian/New Zealand Standard Children’s nightwear and limited daywear having reduced fire hazard, published by Standards Australia on 5 April 1999; or  (ii) paragraphs (a) to (e) of clause 0.2 of Australian/New Zealand Standard Children’s nightwear and limited daywear having reduced fire hazard, published by Standards Australia on 29 December 2003; as applicable. 4 Purpose   For subsection 65C (2) of the Trade Practices Act 1974, these Regulations set out the consumer product safety standards for:  (a) children’s nightwear; and  (b) paper patterns for children’s nightwear. 5 Standard for children’s nightwear until 29 February 2008   Until the end of 29 February 2008, the consumer product safety standard for children’s nightwear is the standard described in:  (a) Part 1 of Schedule 1 (AS/NZS 1249:1999), as varied by Part 2 of that Schedule; or  (b) Part 3 of Schedule 1 (AS/NZS 1249:2003), as varied by Part 4 of that Schedule. 6 Standard for children’s nightwear from 1 March 2008   From 1 March 2008, the consumer product safety standard for children’s nightwear is the standard described in Part 3 of Schedule 1 (AS/NZS 1249:2003), as varied by Part 4 of that Schedule. 7 Standard for paper patterns for children’s nightwear until 29 February 2008   Until the end of 29 February 2008, the consumer product safety standard for paper patterns for children’s nightwear is:  (a) clauses 0.2, 0.5.2, 0.5.3, 0.5.6, 0.5.10 and 5.6 of the standard described in Part 1 of Schedule 2 (AS/NZS 1249:1999), as varied by Part 2 of that Schedule; or  (b) clauses 0.2, 0.5.2, 0.5.3, 0.5.6, 0.5.10 and 5.6 of the standard described in Part 3 of Schedule 2 (AS/NZS 1249:2003), as varied by Part 4 of that Schedule. 8 Standard for paper patterns for children’s nightwear from 1 March 2008   From 1 March 2008, the consumer product safety standard for paper patterns for children’s nightwear is clauses 0.2, 0.5.2, 0.5.3, 0.5.6, 0.5.10 and 5.6 of the standard described in Part 3 of Schedule 2 (AS/NZS 1249:2003), as varied by Part 4 of that Schedule. Schedule 1 Australian/New Zealand Standards for children’s nightwear (regulations 5 and 6) Part 1 AS/NZS 1249:1999   Australian/New Zealand Standard Children’s nightwear and limited daywear having reduced fire hazard, published by Standards Australia on 5 April 1999. Part 2 Variations to AS/NZS 1249:1999 [1] Clause 0.1 omit It also covers requirements for the labelling of paper patterns for these garments. [2] Paragraph 1.2 (a), including the note substitute  (a) Flame spread time   When tested in accordance with ISO 6941 the flame spread time shall be 12 s or greater in the lengthwise direction and the widthwise direction, and no one determination of the time to burn a test specimen shall be less than 10 s in either the lengthwise direction or the widthwise direction. These requirements shall be met before and after washing in accordance with Appendix D.   Where there is insufficient fabric for three lengthwise and three widthwise test specimens, as cited in clause 8.7 of International Standard ISO 6941: 1984/ Amendment 1: 1992 (E), Textile fabric — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens, of 15 October 1992, the flame spread time shall be determined on three lengthwise specimens only.   Where the textile materials or garments are constructed with one fabric overlaying another (for example, quilted fabrics), specimens shall be cut and tested as a combination, that is to say as if the overlay were applied to the under fabric.   Where there is insufficient length of sample to cut test specimens in one piece, not more than two pieces per specimen, cut in the same direction, may be butt‑jointed but not overlapped. The butt‑join shall be secured with five light weight staples spaced evenly across the test specimen. The join shall not be below the centre of the specimen when attached to the vertical test frame specified in ISO 6941.   If, after a repeat test, as required by the relevant clause of ISO 6941, three or more specimens fail to burn to the third marker thread in the lengthwise direction, and three or more specimens fail to burn to the third marker thread in the widthwise direction, the material shall be deemed to have passed the flame spread time test. NOTE:   If in any one set of three specimens, one result exceeds the lowest result by 50 percent for no apparent reason, or, if one or two specimens fail to reach one of the marker threads, another specimen is required to be tested for that direction or face. [3] Clause 1.3 omit Other trims shall meet the following requirements: insert The outer fabric of a composite or appliquéd area shall be considered the fabric face and shall be tested so that the flame impinges on that surface. Other trims shall meet the following requirements: [4] Clause 5.6 omit Part 3 AS/NZS 1249:2003   Australian/New Zealand Standard Children’s nightwear and limited daywear having reduced fire hazard, published by Standards Australia on 29 December 2003. Part 4 Variations to AS/NZS 1249:2003 [5] Clause 0.1 omit It also covers requirements for the labelling of paper patterns for these garments. [6] Clause 1.2 (a), including the note substitute  (a) Flame spread time   When tested in accordance with ISO 6941 the flame spread time shall be 12 s or greater in the lengthwise direction and the widthwise direction, and no one determination of the time to burn a test specimen shall be less than 10 s in either the lengthwise direction or the widthwise direction. These requirements shall be met before and after washing in accordance with Appendix D.   Where there is insufficient length of sample to cut test specimens in one piece, not more than two pieces per specimen, cut in the same direction, may be butt‑jointed but not overlapped. The butt‑join shall be secured with five light weight staples spaced evenly across the test specimen. The join shall not be below the centre of the specimen when attached to the vertical test frame specified in ISO 6941.   If, after a repeat test, as required by the relevant clause of ISO 6941, three or more specimens fail to burn to the third marker thread in the lengthwise direction, and three or more specimens fail to burn to the third marker thread in the widthwise direction, the material shall be deemed to have passed the flame spread time test. NOTE:   If in any one set of three specimens, one result exceeds the lowest result by 50 percent for no apparent reason, or, if one or two specimens fail to reach one of the marker threads, another specimen is required to be tested for that direction or face. [7] Clause 1.3 omit Other trims shall meet the following requirements: insert The outer fabric of a composite or appliquéd area shall be considered the fabric face and shall be tested so that the flame impinges on that surface. Other trims shall meet the following requirements: [8] Subparagraph 5.4 (b) (iii) omit Grey Scale 4. insert Grey Scale 3. [9] Paragraph 5.5 (g) omit not less than 4. insert not less than 3. [10] Clause 5.6 omit Schedule 2 Australian/New Zealand Standards for paper patterns for children’s nightwear (regulations 7 and 8) Part 1 AS/NZS 1249:1999   Australian/New Zealand Standard Children’s nightwear and limited daywear having reduced fire hazard, published by Standards Australia on 5 April 1999. Part 2 Variations to AS/NZS 1249:1999 [1] Clause 0.5.3, notes omit [2] Clause 0.5.10 omit (See Note 1 to Clause 0.1). [3] Clause 5.6 omit shall bear a warning paragraph insert shall bear a clearly legible warning paragraph Part 3 AS/NZS 1249:2003   Australian/New Zealand Standard Children’s Nightwear and limited daywear having reduced fire hazard, published by Standards Australia on 29 December 2003. Part 4 Variations to AS/NZS 1249:2003 [4] Clause 0.5.3, notes omit   [5] Clause 0.5.10 omit (See Note 1 to Clause 0.1). [6] Clause 5.6 omit shall bear a warning paragraph insert shall bear a clearly legible warning paragraph Note 1. All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See www.frli.gov.au.