| TARIFF CONCESSION REVOCATION ORDERUnder Section 269SD(2) of the Customs Act 1901, I Robert Crawford a delegate of the Chief Executive Officer(a) revoke Tariff Concession Order Number 9702587 made on 20.06.97, in respect of the goods described in TABLE A below. This Revocation has effect from 01.01.07; and(b) make in its place the Tariff Concession Orders described in TABLE B. The goods specified in Column 1 of TABLE B are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of TABLE B applies. The Order shall have effect from the date notified in paragraph (a) above as the date of effect for the Revocation. |
|---|
TABLE A
| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item Number Last date of effect |
|---|
| 8708.99.91 | PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 yearsbefore the goods are entered for home consumption, or reproductionsof these parts, being ANY of the following:(a) suspension components being ANY of the following:(i) top or bottom control arms;(ii) uprights, struts and wheel hubs;(iii) anti sway bars and ball joints;(iv) anti tramp bars and torsion bars;(v) suspension bushes, links, bump stops and shackles;(vi) wishbones and wishbone mountings;(vii) bump stop spacers;(viii) sway bar links;(ix) suspension spring mounting plates and pads;(b) brake and clutch bleeding nipples;(c) hood retaining pins;(d) chassis or monocoque;(e) instrument and dashboard panels;(f) radiator ducting (shrouds or cowlings);(g) stub axles;(h) fuel and oil tanks, fillers, necks and caps;(i) roll over hoops or bars but NOT including roll cages;(j) dipsticks;(k) roll bar adjustment control levers;(l) brake balance adjusters control levers;(m) pedal mechanisms, pedal, pedal mountings, pedal stops, pedalpush rod;(n) universal joints and constant velocity (CV) joints;(o) chassis identity plates;(p) steering idler arms and idler arm brackets;(q) track rods and drop arms;(r) steering link arms;(Continued on next page) | 5031.12.06 |
|---|
| This is page 1 of 17 Pages of the instrument...Robert Crawford......................Dated 20 June 2007 Delegate of the Chief Executive Officer |
|---|
Revocation Instrument HS2007/574A
TABLE A
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number. Last date of effect |
|---|
| (Continued from previous page)(s) steering box parts being ANY of the following:(i) steering box housings and casings;(ii) rocker shaft;(iii) thrust buttons;(iv) cover plate;(v) filler plug;(vi) shims;(vii) rocker shaft bush;(viii) steering rack mounting brackets;(t) steering column surrounds, shrouds and facias;(u) steering indicator turn off cam;(v) differentials;(w) differential components being ANY of the following:(i) differential carriers and cases;(ii) crown wheels and pinions;(iii) differential and axle shaft gears;(iv) differential lockers;(v) bearing caps, locking pins and locking clips;(x) transmission shafts, including propeller and half shafts,transmission gears and transmission housings (casings), gearselection mechanisms, gear levers and gear change rod;(y) gearbox parts being ANY of the following:(i) selector forks, sleeves, detents, and housing plates(ii) gearbox filler plug and reverse gear relay lever;(iii) gearbox housings and interlock plunges;(iv) clutch release arms;(v) synchromesh rings and counter shafts;(vi) blocker rings;(vii) retaining clips;(viii) sandwich plates;(ix) speedometer driving gear;(x) spacers;(xi) bearing carriers;(xii) locating ball;(xiii) countershaft and countershaft gear;(xiv) reverse idler shafts and synchronisers;(xv) baulk rings;(z) dust seals and cabin fume excluders;(aa) pipejunctions;(bb) exhaust mounting brackets, plates, ribs and pipe straps;(cc) gearbox tie down straps;(dd) ornamental trimmings or fixtures;(ee) number plates and number plate bezels and trims;(Continued on next page) | |
|---|
| This is page 2 of 17 Pages of the instrument...Robert Crawford......................Dated 20 June 2007 Delegate of the Chief Executive Officer |
|---|
Revocation Instrument HS2007/574A
TABLE A
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number. Last date of effect |
|---|
| (Continued from previous page)(ff) interior trim, cut to fit;(gg) interior and exterior mouldings;(hh) dashboard, instrument, console and speaker bezels;(ii) ornaments proclaiming the make, model, style or accessorylevel of a vehicle;(jj) air ductings;(kk) flexible cabriolet hoods;(ll) chassis reinforcing mountings;(mm) inner wing reinforcement;(nn) door striker plates, door blanking plates and footrests;(oo) handbrake levers and handbrake lever mechanisms;(pp) cables;(qq) aeroscreens;(rr) ashtrays and gloveboxes;(ss) door filler strips;(tt) door window glass runners and guides;(uu) window winder mechanisms;(vv) side panel crash rail;(ww) door kick plates and panels, heel boards;(xx) panel release clips;(yy) fan blades;(zz) sun visors, sun visor mountings and brackets;(aaa) flexible boots (commonly known as gaiters or bellows);(bbb) consoles, placed between the driver and front seatpassengers;(ccc) header rails;(ddd) control knobs, layers, buttons and panels;(eee) choke and accelerator cable stops;(fff) heater;(ggg) heater facia panels;(hhh) grease caps;(iii) steering wheel bosses;(jjj) moulding and trim beading strips;(kkk) reinforcing plates;(lll) fuel pumps;(mmm) door pulls;(nnn) kingpins;(ooo) tonneau pegs;(ppp) radiator header tanks, diaphragms and cores;(qqq) head restsOp. 10.04.97 - TC 9702587 | |
|---|
| This is page 3 of 17 Pages of the instrument...Robert Crawford......................Dated 20 June 2007 Delegate of the Chief Executive Officer |
|---|
Revocation Instrument HS2007/574A
TABLE B
| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:573pt"><td colspan="2" style="width:57.95pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p><a id="TCO2"></a><span>8708.94.52</span></p></td><td style="width:375.45pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span>PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years</span><br><span>before the goods are entered for home consumption, or reproductions</span><br><span>of these parts, being ANY of the following:</span><br><span></span><span>(a) suspension components being ANY of the following:</span><br><span></span><span>(i) top or bottom control arms;</span><br><span></span><span>(ii) uprights, struts and wheel hubs;</span><br><span></span><span>(iii) anti sway bars and ball joints;</span><br><span></span><span>(iv) anti tramp bars and torsion bars;</span><br><span></span><span>(v) suspension bushes, links, bump stops and shackles;</span><br><span></span><span>(vi) wishbones and wishbone mountings;</span><br><span></span><span>(vii) bump stop spacers;</span><br><span></span><span>(viii) sway bar links;</span><br><span></span><span>(ix) suspension spring mounting plates and pads;</span><br><span></span><span>(b) brake and clutch bleeding nipples;</span><br><span></span><span>(c) hood retaining pins;</span><br><span></span><span>(d) chassis or monocoque;</span><br><span></span><span>(e) instrument and dashboard panels;</span><br><span></span><span>(f) radiator ducting (shrouds or cowlings);</span><br><span></span><span>(g) stub axles;</span><br><span></span><span>(h) fuel and oil tanks, fillers, necks and caps;</span><br><span></span><span>(i) roll over hoops or bars but NOT including roll cages;</span><br><span></span><span>(j) dipsticks;</span><br><span></span><span>(k) roll bar adjustment control levers;</span><br><span></span><span>(l) brake balance adjusters control levers;</span><br><span></span><span>(m) pedal mechanisms, pedal, pedal mountings, pedal stops, pedal</span><br><span></span><span>push rod;</span><br><span></span><span>(n) universal joints and constant velocity (CV) joints;</span><br><span></span><span>(o) chassis identity plates;</span><br><span></span><span>(p) steering idler arms and idler arm brackets;</span><br><span></span><span>(q) track rods and drop arms;</span><br><span></span><span>(r) steering link arms;</span><br><span></span><span>(s) steering box parts being ANY of the following:</span><br><span></span><span>(i) steering box housings and casings;</span><br><span></span><span>(ii) rocker shaft;</span><br><span></span><span>(iii) thrust buttons;</span><br><span></span><span>(iv) cover plate;</span><br><span></span><span>(v) filler plug;</span><br><span></span><span>(vi) shims;</span><br><span></span><span>(vii) rocker shaft bush;</span><br><span></span><span>(viii) steering rack mounting brackets;</span><br><span></span><span>(t) steering column surrounds, shrouds and facias;</span><br><span></span><span>(u) steering indicator turn off cam;</span><br><span></span><span>(v) differentials;</span><br><span></span><span>(w) differential components being ANY of the following:</span><br><span></span><span>(i) differential carriers and cases;</span><br><span></span><span>(ii) crown wheels and pinions;</span><br><span></span><span>(iii) differential and axle shaft gears;</span><br><span></span><span>(iv) differential lockers;</span><br><span></span><span>(v) bearing caps, locking pins and locking clips;</span><br><span></span><span>(x) transmission shafts, including propeller and half shafts,</span><br><span></span><span>transmission gears and transmission housings (casings), gear</span><br><span></span><span>selection mechanisms, gear levers and gear change rod;</span><br><span></span><span>(y) gearbox parts being ANY of the following:</span><br><span></span><span>(i) selector forks, sleeves, detents, and housing plates</span><br><span></span><span>(ii) gearbox filler plug and reverse gear relay lever;</span><br><span></span><span>(iii) gearbox housings and interlock plunges;</span><br><span></span><span>(iv) clutch release arms;</span><br><span></span><span>(v) synchromesh rings and counter shafts;</span><br><span></span><span>(vi) blocker rings;</span><br><span></span><span>(vii) retaining clips;</span><br><br><span></span><span>(Continued on next page)</span></p><p class="RomanBodyText" style="margin-top:0pt"><span></span></p></td><td style="width:60.1pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p style="text-align:center"><span>50</span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr style="height:61.2pt"><td style="border-top:0.75pt solid #000000; vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 4</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:7.5pt"><td colspan="2" style="width:57.95pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p><span></span></p></td><td style="width:375.45pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span></span><span>(Continued from previous page)</span><br><br><span></span><span>(viii) sandwich plates;</span><br><span></span><span>(ix) speedometer driving gear;</span><br><span></span><span>(x) spacers;</span><br><span></span><span>(xi) bearing carriers;</span><br><span></span><span>(xii) locating ball;</span><br><span></span><span>(xiii) countershaft and countershaft gear;</span><br><span></span><span>(xiv) reverse idler shafts and synchronisers;</span><br><span></span><span>(xv) baulk rings;</span><br><span></span><span>(z) dust seals and cabin fume excluders;</span><br><span></span><span>(aa) pipejunctions;</span><br><span></span><span>(bb) exhaust mounting brackets, plates, ribs and pipe straps;</span><br><span></span><span>(cc) gearbox tie down straps;</span><br><span></span><span>(dd) ornamental trimmings or fixtures;</span><br><span></span><span>(ee) number plates and number plate bezels and trims;</span><br><span></span><span>(ff) interior trim, cut to fit;</span><br><span></span><span>(gg) interior and exterior mouldings;</span><br><span></span><span>(hh) dashboard, instrument, console and speaker bezels;</span><br><span></span><span>(ii) ornaments proclaiming the make, model, style or accessory</span><br><span></span><span>level of a vehicle;</span><br><span></span><span>(jj) air ductings;</span><br><span></span><span>(kk) flexible cabriolet hoods;</span><br><span></span><span>(ll) chassis reinforcing mountings;</span><br><span></span><span>(mm) inner wing reinforcement;</span><br><span></span><span>(nn) door striker plates, door blanking plates and footrests;</span><br><span></span><span>(oo) handbrake levers and handbrake lever mechanisms;</span><br><span></span><span>(pp) cables;</span><br><span></span><span>(qq) aeroscreens;</span><br><span></span><span>(rr) ashtrays and gloveboxes;</span><br><span></span><span>(ss) door filler strips;</span><br><span></span><span>(tt) door window glass runners and guides;</span><br><span></span><span>(uu) window winder mechanisms;</span><br><span></span><span>(vv) side panel crash rail;</span><br><span></span><span>(ww) door kick plates and panels, heel boards;</span><br><span></span><span>(xx) panel release clips;</span><br><span></span><span>(yy) fan blades;</span><br><span></span><span>(zz) sun visors, sun visor mountings and brackets;</span><br><span></span><span>(aaa) flexible boots (commonly known as gaiters or bellows);</span><br><span></span><span>(bbb) consoles, placed between the driver and front seat</span><br><span></span><span>passengers;</span><br><span></span><span>(ccc) header rails;</span><br><span></span><span>(ddd) control knobs, layers, buttons and panels;</span><br><span></span><span>(eee) choke and accelerator cable stops;</span><br><span></span><span>(fff) heater;</span><br><span></span><span>(ggg) heater facia panels;</span><br><span></span><span>(hhh) grease caps;</span><br><span></span><span>(iii) steering wheel bosses;</span><br><span></span><span>(jjj) moulding and trim beading strips;</span><br><span></span><span>(kkk) reinforcing plates;</span><br><span></span><span>(lll) fuel pumps;</span><br><span></span><span>(mmm) door pulls;</span><br><span></span><span>(nnn) kingpins;</span><br><span></span><span>(ooo) tonneau pegs;</span><br><span></span><span>(ppp) radiator header tanks, diaphragms and cores;</span><br><span></span><span>(qqq) head rests</span><br><br><span>Op. 01.01.07</span><span style="width:254.24pt; display:inline-block"> </span><span>- TC 0614554</span></p></td><td style="width:60.1pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p style="text-align:center"><span></span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 5</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:569.65pt"><td colspan="2" style="width:57.95pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p><span>8708.92.52</span></p></td><td style="width:375.45pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span>PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years</span><br><span>before the goods are entered for home consumption, or reproductions</span><br><span>of these parts, being ANY of the following:</span><br><span></span><span>(a) suspension components being ANY of the following:</span><br><span></span><span>(i) top or bottom control arms;</span><br><span></span><span>(ii) uprights, struts and wheel hubs;</span><br><span></span><span>(iii) anti sway bars and ball joints;</span><br><span></span><span>(iv) anti tramp bars and torsion bars;</span><br><span></span><span>(v) suspension bushes, links, bump stops and shackles;</span><br><span></span><span>(vi) wishbones and wishbone mountings;</span><br><span></span><span>(vii) bump stop spacers;</span><br><span></span><span>(viii) sway bar links;</span><br><span></span><span>(ix) suspension spring mounting plates and pads;</span><br><span></span><span>(b) brake and clutch bleeding nipples;</span><br><span></span><span>(c) hood retaining pins;</span><br><span></span><span>(d) chassis or monocoque;</span><br><span></span><span>(e) instrument and dashboard panels;</span><br><span></span><span>(f) radiator ducting (shrouds or cowlings);</span><br><span></span><span>(g) stub axles;</span><br><span></span><span>(h) fuel and oil tanks, fillers, necks and caps;</span><br><span></span><span>(i) roll over hoops or bars but NOT including roll cages;</span><br><span></span><span>(j) dipsticks;</span><br><span></span><span>(k) roll bar adjustment control levers;</span><br><span></span><span>(l) brake balance adjusters control levers;</span><br><span></span><span>(m) pedal mechanisms, pedal, pedal mountings, pedal stops, pedal</span><br><span></span><span>push rod;</span><br><span></span><span>(n) universal joints and constant velocity (CV) joints;</span><br><span></span><span>(o) chassis identity plates;</span><br><span></span><span>(p) steering idler arms and idler arm brackets;</span><br><span></span><span>(q) track rods and drop arms;</span><br><span></span><span>(r) steering link arms;</span><br><span></span><span>(s) steering box parts being ANY of the following:</span><br><span></span><span>(i) steering box housings and casings;</span><br><span></span><span>(ii) rocker shaft;</span><br><span></span><span>(iii) thrust buttons;</span><br><span></span><span>(iv) cover plate;</span><br><span></span><span>(v) filler plug;</span><br><span></span><span>(vi) shims;</span><br><span></span><span>(vii) rocker shaft bush;</span><br><span></span><span>(viii) steering rack mounting brackets;</span><br><span></span><span>(t) steering column surrounds, shrouds and facias;</span><br><span></span><span>(u) steering indicator turn off cam;</span><br><span></span><span>(v) differentials;</span><br><span></span><span>(w) differential components being ANY of the following:</span><br><span></span><span>(i) differential carriers and cases;</span><br><span></span><span>(ii) crown wheels and pinions;</span><br><span></span><span>(iii) differential and axle shaft gears;</span><br><span></span><span>(iv) differential lockers;</span><br><span></span><span>(v) bearing caps, locking pins and locking clips;</span><br><span></span><span>(x) transmission shafts, including propeller and half shafts,</span><br><span></span><span>transmission gears and transmission housings (casings), gear</span><br><span></span><span>selection mechanisms, gear levers and gear change rod;</span><br><span></span><span>(y) gearbox parts being ANY of the following:</span><br><span></span><span>(i) selector forks, sleeves, detents, and housing plates</span><br><span></span><span>(ii) gearbox filler plug and reverse gear relay lever;</span><br><span></span><span>(iii) gearbox housings and interlock plunges;</span><br><span></span><span>(iv) clutch release arms;</span><br><span></span><span>(v) synchromesh rings and counter shafts;</span><br><span></span><span>(vi) blocker rings;</span><br><span></span><span>(vii) retaining clips;</span><br><br><span></span><span>(Continued on next page)</span></p></td><td style="width:60.1pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p style="text-align:center"><span>50</span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="border-top:0.75pt solid #000000; vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 6</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:3.75pt"><td colspan="2" style="width:57.95pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p><span></span></p></td><td style="width:375.45pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span></span><span>(Continued from previous page)</span><br><br><span></span><span>(viii) sandwich plates;</span><br><span></span><span>(ix) speedometer driving gear;</span><br><span></span><span>(x) spacers;</span><br><span></span><span>(xi) bearing carriers;</span><br><span></span><span>(xii) locating ball;</span><br><span></span><span>(xiii) countershaft and countershaft gear;</span><br><span></span><span>(xiv) reverse idler shafts and synchronisers;</span><br><span></span><span>(xv) baulk rings;</span><br><span></span><span>(z) dust seals and cabin fume excluders;</span><br><span></span><span>(aa) pipejunctions;</span><br><span></span><span>(bb) exhaust mounting brackets, plates, ribs and pipe straps;</span><br><span></span><span>(cc) gearbox tie down straps;</span><br><span></span><span>(dd) ornamental trimmings or fixtures;</span><br><span></span><span>(ee) number plates and number plate bezels and trims;</span><br><span></span><span>(ff) interior trim, cut to fit;</span><br><span></span><span>(gg) interior and exterior mouldings;</span><br><span></span><span>(hh) dashboard, instrument, console and speaker bezels;</span><br><span></span><span>(ii) ornaments proclaiming the make, model, style or accessory</span><br><span></span><span>level of a vehicle;</span><br><span></span><span>(jj) air ductings;</span><br><span></span><span>(kk) flexible cabriolet hoods;</span><br><span></span><span>(ll) chassis reinforcing mountings;</span><br><span></span><span>(mm) inner wing reinforcement;</span><br><span></span><span>(nn) door striker plates, door blanking plates and footrests;</span><br><span></span><span>(oo) handbrake levers and handbrake lever mechanisms;</span><br><span></span><span>(pp) cables;</span><br><span></span><span>(qq) aeroscreens;</span><br><span></span><span>(rr) ashtrays and gloveboxes;</span><br><span></span><span>(ss) door filler strips;</span><br><span></span><span>(tt) door window glass runners and guides;</span><br><span></span><span>(uu) window winder mechanisms;</span><br><span></span><span>(vv) side panel crash rail;</span><br><span></span><span>(ww) door kick plates and panels, heel boards;</span><br><span></span><span>(xx) panel release clips;</span><br><span></span><span>(yy) fan blades;</span><br><span></span><span>(zz) sun visors, sun visor mountings and brackets;</span><br><span></span><span>(aaa) flexible boots (commonly known as gaiters or bellows);</span><br><span></span><span>(bbb) consoles, placed between the driver and front seat</span><br><span></span><span>passengers;</span><br><span></span><span>(ccc) header rails;</span><br><span></span><span>(ddd) control knobs, layers, buttons and panels;</span><br><span></span><span>(eee) choke and accelerator cable stops;</span><br><span></span><span>(fff) heater;</span><br><span></span><span>(ggg) heater facia panels;</span><br><span></span><span>(hhh) grease caps;</span><br><span></span><span>(iii) steering wheel bosses;</span><br><span></span><span>(jjj) moulding and trim beading strips;</span><br><span></span><span>(kkk) reinforcing plates;</span><br><span></span><span>(lll) fuel pumps;</span><br><span></span><span>(mmm) door pulls;</span><br><span></span><span>(nnn) kingpins;</span><br><span></span><span>(ooo) tonneau pegs;</span><br><span></span><span>(ppp) radiator header tanks, diaphragms and cores;</span><br><span></span><span>(qqq) head rests</span><br><br><span>Op. 01.01.07</span><span style="width:254.24pt; display:inline-block"> </span><span>- TC 0614555</span></p></td><td style="width:60.1pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p style="text-align:center"><span></span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 7</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:560.65pt"><td colspan="2" style="width:57.95pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p><span>8708.40.52</span></p></td><td style="width:375.45pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span>PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years</span><br><span>before the goods are entered for home consumption, or reproductions</span><br><span>of these parts, being ANY of the following:</span><br><span></span><span>(a) suspension components being ANY of the following:</span><br><span></span><span>(i) top or bottom control arms;</span><br><span></span><span>(ii) uprights, struts and wheel hubs;</span><br><span></span><span>(iii) anti sway bars and ball joints;</span><br><span></span><span>(iv) anti tramp bars and torsion bars;</span><br><span></span><span>(v) suspension bushes, links, bump stops and shackles;</span><br><span></span><span>(vi) wishbones and wishbone mountings;</span><br><span></span><span>(vii) bump stop spacers;</span><br><span></span><span>(viii) sway bar links;</span><br><span></span><span>(ix) suspension spring mounting plates and pads;</span><br><span></span><span>(b) brake and clutch bleeding nipples;</span><br><span></span><span>(c) hood retaining pins;</span><br><span></span><span>(d) chassis or monocoque;</span><br><span></span><span>(e) instrument and dashboard panels;</span><br><span></span><span>(f) radiator ducting (shrouds or cowlings);</span><br><span></span><span>(g) stub axles;</span><br><span></span><span>(h) fuel and oil tanks, fillers, necks and caps;</span><br><span></span><span>(i) roll over hoops or bars but NOT including roll cages;</span><br><span></span><span>(j) dipsticks;</span><br><span></span><span>(k) roll bar adjustment control levers;</span><br><span></span><span>(l) brake balance adjusters control levers;</span><br><span></span><span>(m) pedal mechanisms, pedal, pedal mountings, pedal stops, pedal</span><br><span></span><span>push rod;</span><br><span></span><span>(n) universal joints and constant velocity (CV) joints;</span><br><span></span><span>(o) chassis identity plates;</span><br><span></span><span>(p) steering idler arms and idler arm brackets;</span><br><span></span><span>(q) track rods and drop arms;</span><br><span></span><span>(r) steering link arms;</span><br><span></span><span>(s) steering box parts being ANY of the following:</span><br><span></span><span>(i) steering box housings and casings;</span><br><span></span><span>(ii) rocker shaft;</span><br><span></span><span>(iii) thrust buttons;</span><br><span></span><span>(iv) cover plate;</span><br><span></span><span>(v) filler plug;</span><br><span></span><span>(vi) shims;</span><br><span></span><span>(vii) rocker shaft bush;</span><br><span></span><span>(viii) steering rack mounting brackets;</span><br><span></span><span>(t) steering column surrounds, shrouds and facias;</span><br><span></span><span>(u) steering indicator turn off cam;</span><br><span></span><span>(v) differentials;</span><br><span></span><span>(w) differential components being ANY of the following:</span><br><span></span><span>(i) differential carriers and cases;</span><br><span></span><span>(ii) crown wheels and pinions;</span><br><span></span><span>(iii) differential and axle shaft gears;</span><br><span></span><span>(iv) differential lockers;</span><br><span></span><span>(v) bearing caps, locking pins and locking clips;</span><br><span></span><span>(x) transmission shafts, including propeller and half shafts,</span><br><span></span><span>transmission gears and transmission housings (casings), gear</span><br><span></span><span>selection mechanisms, gear levers and gear change rod;</span><br><span></span><span>(y) gearbox parts being ANY of the following:</span><br><span></span><span>(i) selector forks, sleeves, detents, and housing plates</span><br><span></span><span>(ii) gearbox filler plug and reverse gear relay lever;</span><br><span></span><span>(iii) gearbox housings and interlock plunges;</span><br><span></span><span>(iv) clutch release arms;</span><br><span></span><span>(v) synchromesh rings and counter shafts;</span><br><span></span><span>(vi) blocker rings;</span><br><span></span><span>(vii) retaining clips;</span><br><br><span></span><span>(Continued on next page)</span></p></td><td style="width:60.1pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p style="text-align:center"><span>50</span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="border-top:0.75pt solid #000000; vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 8</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:3.75pt"><td colspan="2" style="width:57.95pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p><span></span></p></td><td style="width:375.45pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span></span><span>(Continued from previous page)</span><br><br><span></span><span>(viii) sandwich plates;</span><br><span></span><span>(ix) speedometer driving gear;</span><br><span></span><span>(x) spacers;</span><br><span></span><span>(xi) bearing carriers;</span><br><span></span><span>(xii) locating ball;</span><br><span></span><span>(xiii) countershaft and countershaft gear;</span><br><span></span><span>(xiv) reverse idler shafts and synchronisers;</span><br><span></span><span>(xv) baulk rings;</span><br><span></span><span>(z) dust seals and cabin fume excluders;</span><br><span></span><span>(aa) pipejunctions;</span><br><span></span><span>(bb) exhaust mounting brackets, plates, ribs and pipe straps;</span><br><span></span><span>(cc) gearbox tie down straps;</span><br><span></span><span>(dd) ornamental trimmings or fixtures;</span><br><span></span><span>(ee) number plates and number plate bezels and trims;</span><br><span></span><span>(ff) interior trim, cut to fit;</span><br><span></span><span>(gg) interior and exterior mouldings;</span><br><span></span><span>(hh) dashboard, instrument, console and speaker bezels;</span><br><span></span><span>(ii) ornaments proclaiming the make, model, style or accessory</span><br><span></span><span>level of a vehicle;</span><br><span></span><span>(jj) air ductings;</span><br><span></span><span>(kk) flexible cabriolet hoods;</span><br><span></span><span>(ll) chassis reinforcing mountings;</span><br><span></span><span>(mm) inner wing reinforcement;</span><br><span></span><span>(nn) door striker plates, door blanking plates and footrests;</span><br><span></span><span>(oo) handbrake levers and handbrake lever mechanisms;</span><br><span></span><span>(pp) cables;</span><br><span></span><span>(qq) aeroscreens;</span><br><span></span><span>(rr) ashtrays and gloveboxes;</span><br><span></span><span>(ss) door filler strips;</span><br><span></span><span>(tt) door window glass runners and guides;</span><br><span></span><span>(uu) window winder mechanisms;</span><br><span></span><span>(vv) side panel crash rail;</span><br><span></span><span>(ww) door kick plates and panels, heel boards;</span><br><span></span><span>(xx) panel release clips;</span><br><span></span><span>(yy) fan blades;</span><br><span></span><span>(zz) sun visors, sun visor mountings and brackets;</span><br><span></span><span>(aaa) flexible boots (commonly known as gaiters or bellows);</span><br><span></span><span>(bbb) consoles, placed between the driver and front seat</span><br><span></span><span>passengers;</span><br><span></span><span>(ccc) header rails;</span><br><span></span><span>(ddd) control knobs, layers, buttons and panels;</span><br><span></span><span>(eee) choke and accelerator cable stops;</span><br><span></span><span>(fff) heater;</span><br><span></span><span>(ggg) heater facia panels;</span><br><span></span><span>(hhh) grease caps;</span><br><span></span><span>(iii) steering wheel bosses;</span><br><span></span><span>(jjj) moulding and trim beading strips;</span><br><span></span><span>(kkk) reinforcing plates;</span><br><span></span><span>(lll) fuel pumps;</span><br><span></span><span>(mmm) door pulls;</span><br><span></span><span>(nnn) kingpins;</span><br><span></span><span>(ooo) tonneau pegs;</span><br><span></span><span>(ppp) radiator header tanks, diaphragms and cores;</span><br><span></span><span>(qqq) head rests</span><br><br><span>Op. 01.01.07</span><span style="width:254.24pt; display:inline-block"> </span><span>- TC 0614556</span></p></td><td style="width:60.1pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p style="text-align:center"><span></span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 9</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:578.65pt"><td colspan="2" style="width:57.95pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p><span>8708.50.52</span></p></td><td style="width:375.45pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span>PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years</span><br><span>before the goods are entered for home consumption, or reproductions</span><br><span>of these parts, being ANY of the following:</span><br><span></span><span>(a) suspension components being ANY of the following:</span><br><span></span><span>(i) top or bottom control arms;</span><br><span></span><span>(ii) uprights, struts and wheel hubs;</span><br><span></span><span>(iii) anti sway bars and ball joints;</span><br><span></span><span>(iv) anti tramp bars and torsion bars;</span><br><span></span><span>(v) suspension bushes, links, bump stops and shackles;</span><br><span></span><span>(vi) wishbones and wishbone mountings;</span><br><span></span><span>(vii) bump stop spacers;</span><br><span></span><span>(viii) sway bar links;</span><br><span></span><span>(ix) suspension spring mounting plates and pads;</span><br><span></span><span>(b) brake and clutch bleeding nipples;</span><br><span></span><span>(c) hood retaining pins;</span><br><span></span><span>(d) chassis or monocoque;</span><br><span></span><span>(e) instrument and dashboard panels;</span><br><span></span><span>(f) radiator ducting (shrouds or cowlings);</span><br><span></span><span>(g) stub axles;</span><br><span></span><span>(h) fuel and oil tanks, fillers, necks and caps;</span><br><span></span><span>(i) roll over hoops or bars but NOT including roll cages;</span><br><span></span><span>(j) dipsticks;</span><br><span></span><span>(k) roll bar adjustment control levers;</span><br><span></span><span>(l) brake balance adjusters control levers;</span><br><span></span><span>(m) pedal mechanisms, pedal, pedal mountings, pedal stops, pedal</span><br><span></span><span>push rod;</span><br><span></span><span>(n) universal joints and constant velocity (CV) joints;</span><br><span></span><span>(o) chassis identity plates;</span><br><span></span><span>(p) steering idler arms and idler arm brackets;</span><br><span></span><span>(q) track rods and drop arms;</span><br><span></span><span>(r) steering link arms;</span><br><span></span><span>(s) steering box parts being ANY of the following:</span><br><span></span><span>(i) steering box housings and casings;</span><br><span></span><span>(ii) rocker shaft;</span><br><span></span><span>(iii) thrust buttons;</span><br><span></span><span>(iv) cover plate;</span><br><span></span><span>(v) filler plug;</span><br><span></span><span>(vi) shims;</span><br><span></span><span>(vii) rocker shaft bush;</span><br><span></span><span>(viii) steering rack mounting brackets;</span><br><span></span><span>(t) steering column surrounds, shrouds and facias;</span><br><span></span><span>(u) steering indicator turn off cam;</span><br><span></span><span>(v) differentials;</span><br><span></span><span>(w) differential components being ANY of the following:</span><br><span></span><span>(i) differential carriers and cases;</span><br><span></span><span>(ii) crown wheels and pinions;</span><br><span></span><span>(iii) differential and axle shaft gears;</span><br><span></span><span>(iv) differential lockers;</span><br><span></span><span>(v) bearing caps, locking pins and locking clips;</span><br><span></span><span>(x) transmission shafts, including propeller and half shafts,</span><br><span></span><span>transmission gears and transmission housings (casings), gear</span><br><span></span><span>selection mechanisms, gear levers and gear change rod;</span><br><span></span><span>(y) gearbox parts being ANY of the following:</span><br><span></span><span>(i) selector forks, sleeves, detents, and housing plates</span><br><span></span><span>(ii) gearbox filler plug and reverse gear relay lever;</span><br><span></span><span>(iii) gearbox housings and interlock plunges;</span><br><span></span><span>(iv) clutch release arms;</span><br><span></span><span>(v) synchromesh rings and counter shafts;</span><br><span></span><span>(vi) blocker rings;</span><br><span></span><span>(vii) retaining clips;</span><br><span></span></p><p class="RomanBodyText" style="margin-top:0pt"><span></span><span>(Continued on next page)</span></p></td><td style="width:60.1pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p style="text-align:center"><span>50</span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="border-top:0.75pt solid #000000; vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 10</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:537pt"><td colspan="2" style="width:57.95pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p><span></span></p></td><td style="width:375.45pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span></span><span>(Continued from previous page)</span><br><br><span></span><span>(viii) sandwich plates;</span><br><span></span><span>(ix) speedometer driving gear;</span><br><span></span><span>(x) spacers;</span><br><span></span><span>(xi) bearing carriers;</span><br><span></span><span>(xii) locating ball;</span><br><span></span><span>(xiii) countershaft and countershaft gear;</span><br><span></span><span>(xiv) reverse idler shafts and synchronisers;</span><br><span></span><span>(xv) baulk rings;</span><br><span></span><span>(z) dust seals and cabin fume excluders;</span><br><span></span><span>(aa) pipejunctions;</span><br><span></span><span>(bb) exhaust mounting brackets, plates, ribs and pipe straps;</span><br><span></span><span>(cc) gearbox tie down straps;</span><br><span></span><span>(dd) ornamental trimmings or fixtures;</span><br><span></span><span>(ee) number plates and number plate bezels and trims;</span><br><span></span><span>(ff) interior trim, cut to fit;</span><br><span></span><span>(gg) interior and exterior mouldings;</span><br><span></span><span>(hh) dashboard, instrument, console and speaker bezels;</span><br><span></span><span>(ii) ornaments proclaiming the make, model, style or accessory</span><br><span></span><span>level of a vehicle;</span><br><span></span><span>(jj) air ductings;</span><br><span></span><span>(kk) flexible cabriolet hoods;</span><br><span></span><span>(ll) chassis reinforcing mountings;</span><br><span></span><span>(mm) inner wing reinforcement;</span><br><span></span><span>(nn) door striker plates, door blanking plates and footrests;</span><br><span></span><span>(oo) handbrake levers and handbrake lever mechanisms;</span><br><span></span><span>(pp) cables;</span><br><span></span><span>(qq) aeroscreens;</span><br><span></span><span>(rr) ashtrays and gloveboxes;</span><br><span></span><span>(ss) door filler strips;</span><br><span></span><span>(tt) door window glass runners and guides;</span><br><span></span><span>(uu) window winder mechanisms;</span><br><span></span><span>(vv) side panel crash rail;</span><br><span></span><span>(ww) door kick plates and panels, heel boards;</span><br><span></span><span>(xx) panel release clips;</span><br><span></span><span>(yy) fan blades;</span><br><span></span><span>(zz) sun visors, sun visor mountings and brackets;</span><br><span></span><span>(aaa) flexible boots (commonly known as gaiters or bellows);</span><br><span></span><span>(bbb) consoles, placed between the driver and front seat</span><br><span></span><span>passengers;</span><br><span></span><span>(ccc) header rails;</span><br><span></span><span>(ddd) control knobs, layers, buttons and panels;</span><br><span></span><span>(eee) choke and accelerator cable stops;</span><br><span></span><span>(fff) heater;</span><br><span></span><span>(ggg) heater facia panels;</span><br><span></span><span>(hhh) grease caps;</span><br><span></span><span>(iii) steering wheel bosses;</span><br><span></span><span>(jjj) moulding and trim beading strips;</span><br><span></span><span>(kkk) reinforcing plates;</span><br><span></span><span>(lll) fuel pumps;</span><br><span></span><span>(mmm) door pulls;</span><br><span></span><span>(nnn) kingpins;</span><br><span></span><span>(ooo) tonneau pegs;</span><br><span></span><span>(ppp) radiator header tanks, diaphragms and cores;</span><br><span></span><span>(qqq) head rests</span><br><br><span>Op. 01.01.07</span><span style="width:254.24pt; display:inline-block"> </span><span>- TC 0614557</span></p></td><td style="width:60.1pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p style="text-align:center"><span></span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 11</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:578.65pt"><td colspan="2" style="width:57.95pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p><span>8708.80.92</span></p></td><td style="width:375.45pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span>PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years</span><br><span>before the goods are entered for home consumption, or reproductions</span><br><span>of these parts, being ANY of the following:</span><br><span></span><span>(a) suspension components being ANY of the following:</span><br><span></span><span>(i) top or bottom control arms;</span><br><span></span><span>(ii) uprights, struts and wheel hubs;</span><br><span></span><span>(iii) anti sway bars and ball joints;</span><br><span></span><span>(iv) anti tramp bars and torsion bars;</span><br><span></span><span>(v) suspension bushes, links, bump stops and shackles;</span><br><span></span><span>(vi) wishbones and wishbone mountings;</span><br><span></span><span>(vii) bump stop spacers;</span><br><span></span><span>(viii) sway bar links;</span><br><span></span><span>(ix) suspension spring mounting plates and pads;</span><br><span></span><span>(b) brake and clutch bleeding nipples;</span><br><span></span><span>(c) hood retaining pins;</span><br><span></span><span>(d) chassis or monocoque;</span><br><span></span><span>(e) instrument and dashboard panels;</span><br><span></span><span>(f) radiator ducting (shrouds or cowlings);</span><br><span></span><span>(g) stub axles;</span><br><span></span><span>(h) fuel and oil tanks, fillers, necks and caps;</span><br><span></span><span>(i) roll over hoops or bars but NOT including roll cages;</span><br><span></span><span>(j) dipsticks;</span><br><span></span><span>(k) roll bar adjustment control levers;</span><br><span></span><span>(l) brake balance adjusters control levers;</span><br><span></span><span>(m) pedal mechanisms, pedal, pedal mountings, pedal stops, pedal</span><br><span></span><span>push rod;</span><br><span></span><span>(n) universal joints and constant velocity (CV) joints;</span><br><span></span><span>(o) chassis identity plates;</span><br><span></span><span>(p) steering idler arms and idler arm brackets;</span><br><span></span><span>(q) track rods and drop arms;</span><br><span></span><span>(r) steering link arms;</span><br><span></span><span>(s) steering box parts being ANY of the following:</span><br><span></span><span>(i) steering box housings and casings;</span><br><span></span><span>(ii) rocker shaft;</span><br><span></span><span>(iii) thrust buttons;</span><br><span></span><span>(iv) cover plate;</span><br><span></span><span>(v) filler plug;</span><br><span></span><span>(vi) shims;</span><br><span></span><span>(vii) rocker shaft bush;</span><br><span></span><span>(viii) steering rack mounting brackets;</span><br><span></span><span>(t) steering column surrounds, shrouds and facias;</span><br><span></span><span>(u) steering indicator turn off cam;</span><br><span></span><span>(v) differentials;</span><br><span></span><span>(w) differential components being ANY of the following:</span><br><span></span><span>(i) differential carriers and cases;</span><br><span></span><span>(ii) crown wheels and pinions;</span><br><span></span><span>(iii) differential and axle shaft gears;</span><br><span></span><span>(iv) differential lockers;</span><br><span></span><span>(v) bearing caps, locking pins and locking clips;</span><br><span></span><span>(x) transmission shafts, including propeller and half shafts,</span><br><span></span><span>transmission gears and transmission housings (casings), gear</span><br><span></span><span>selection mechanisms, gear levers and gear change rod;</span><br><span></span><span>(y) gearbox parts being ANY of the following:</span><br><span></span><span>(i) selector forks, sleeves, detents, and housing plates</span><br><span></span><span>(ii) gearbox filler plug and reverse gear relay lever;</span><br><span></span><span>(iii) gearbox housings and interlock plunges;</span><br><span></span><span>(iv) clutch release arms;</span><br><span></span><span>(v) synchromesh rings and counter shafts;</span><br><span></span><span>(vi) blocker rings;</span><br><span></span><span>(vii) retaining clips;</span><br><br><span></span><span>(Continued on next page)</span></p></td><td style="width:60.1pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p style="text-align:center"><span>50</span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="border-top:0.75pt solid #000000; vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 12</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:3.75pt"><td colspan="2" style="width:57.95pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p><span></span></p></td><td style="width:375.45pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span></span><span>(Continued from previous page)</span><br><br><span></span><span>(viii) sandwich plates;</span><br><span></span><span>(ix) speedometer driving gear;</span><br><span></span><span>(x) spacers;</span><br><span></span><span>(xi) bearing carriers;</span><br><span></span><span>(xii) locating ball;</span><br><span></span><span>(xiii) countershaft and countershaft gear;</span><br><span></span><span>(xiv) reverse idler shafts and synchronisers;</span><br><span></span><span>(xv) baulk rings;</span><br><span></span><span>(z) dust seals and cabin fume excluders;</span><br><span></span><span>(aa) pipejunctions;</span><br><span></span><span>(bb) exhaust mounting brackets, plates, ribs and pipe straps;</span><br><span></span><span>(cc) gearbox tie down straps;</span><br><span></span><span>(dd) ornamental trimmings or fixtures;</span><br><span></span><span>(ee) number plates and number plate bezels and trims;</span><br><span></span><span>(ff) interior trim, cut to fit;</span><br><span></span><span>(gg) interior and exterior mouldings;</span><br><span></span><span>(hh) dashboard, instrument, console and speaker bezels;</span><br><span></span><span>(ii) ornaments proclaiming the make, model, style or accessory</span><br><span></span><span>level of a vehicle;</span><br><span></span><span>(jj) air ductings;</span><br><span></span><span>(kk) flexible cabriolet hoods;</span><br><span></span><span>(ll) chassis reinforcing mountings;</span><br><span></span><span>(mm) inner wing reinforcement;</span><br><span></span><span>(nn) door striker plates, door blanking plates and footrests;</span><br><span></span><span>(oo) handbrake levers and handbrake lever mechanisms;</span><br><span></span><span>(pp) cables;</span><br><span></span><span>(qq) aeroscreens;</span><br><span></span><span>(rr) ashtrays and gloveboxes;</span><br><span></span><span>(ss) door filler strips;</span><br><span></span><span>(tt) door window glass runners and guides;</span><br><span></span><span>(uu) window winder mechanisms;</span><br><span></span><span>(vv) side panel crash rail;</span><br><span></span><span>(ww) door kick plates and panels, heel boards;</span><br><span></span><span>(xx) panel release clips;</span><br><span></span><span>(yy) fan blades;</span><br><span></span><span>(zz) sun visors, sun visor mountings and brackets;</span><br><span></span><span>(aaa) flexible boots (commonly known as gaiters or bellows);</span><br><span></span><span>(bbb) consoles, placed between the driver and front seat</span><br><span></span><span>passengers;</span><br><span></span><span>(ccc) header rails;</span><br><span></span><span>(ddd) control knobs, layers, buttons and panels;</span><br><span></span><span>(eee) choke and accelerator cable stops;</span><br><span></span><span>(fff) heater;</span><br><span></span><span>(ggg) heater facia panels;</span><br><span></span><span>(hhh) grease caps;</span><br><span></span><span>(iii) steering wheel bosses;</span><br><span></span><span>(jjj) moulding and trim beading strips;</span><br><span></span><span>(kkk) reinforcing plates;</span><br><span></span><span>(lll) fuel pumps;</span><br><span></span><span>(mmm) door pulls;</span><br><span></span><span>(nnn) kingpins;</span><br><span></span><span>(ooo) tonneau pegs;</span><br><span></span><span>(ppp) radiator header tanks, diaphragms and cores;</span><br><span></span><span>(qqq) head rests</span><br><br><span>Op. 01.01.07</span><span style="width:254.24pt; display:inline-block"> </span><span>- TC 0614558</span></p></td><td style="width:60.1pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p style="text-align:center"><span></span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 13</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:578.65pt"><td colspan="2" style="width:57.95pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p><span>8708.91.42</span></p></td><td style="width:375.45pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span>PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years</span><br><span>before the goods are entered for home consumption, or reproductions</span><br><span>of these parts, being ANY of the following:</span><br><span></span><span>(a) suspension components being ANY of the following:</span><br><span></span><span>(i) top or bottom control arms;</span><br><span></span><span>(ii) uprights, struts and wheel hubs;</span><br><span></span><span>(iii) anti sway bars and ball joints;</span><br><span></span><span>(iv) anti tramp bars and torsion bars;</span><br><span></span><span>(v) suspension bushes, links, bump stops and shackles;</span><br><span></span><span>(vi) wishbones and wishbone mountings;</span><br><span></span><span>(vii) bump stop spacers;</span><br><span></span><span>(viii) sway bar links;</span><br><span></span><span>(ix) suspension spring mounting plates and pads;</span><br><span></span><span>(b) brake and clutch bleeding nipples;</span><br><span></span><span>(c) hood retaining pins;</span><br><span></span><span>(d) chassis or monocoque;</span><br><span></span><span>(e) instrument and dashboard panels;</span><br><span></span><span>(f) radiator ducting (shrouds or cowlings);</span><br><span></span><span>(g) stub axles;</span><br><span></span><span>(h) fuel and oil tanks, fillers, necks and caps;</span><br><span></span><span>(i) roll over hoops or bars but NOT including roll cages;</span><br><span></span><span>(j) dipsticks;</span><br><span></span><span>(k) roll bar adjustment control levers;</span><br><span></span><span>(l) brake balance adjusters control levers;</span><br><span></span><span>(m) pedal mechanisms, pedal, pedal mountings, pedal stops, pedal</span><br><span></span><span>push rod;</span><br><span></span><span>(n) universal joints and constant velocity (CV) joints;</span><br><span></span><span>(o) chassis identity plates;</span><br><span></span><span>(p) steering idler arms and idler arm brackets;</span><br><span></span><span>(q) track rods and drop arms;</span><br><span></span><span>(r) steering link arms;</span><br><span></span><span>(s) steering box parts being ANY of the following:</span><br><span></span><span>(i) steering box housings and casings;</span><br><span></span><span>(ii) rocker shaft;</span><br><span></span><span>(iii) thrust buttons;</span><br><span></span><span>(iv) cover plate;</span><br><span></span><span>(v) filler plug;</span><br><span></span><span>(vi) shims;</span><br><span></span><span>(vii) rocker shaft bush;</span><br><span></span><span>(viii) steering rack mounting brackets;</span><br><span></span><span>(t) steering column surrounds, shrouds and facias;</span><br><span></span><span>(u) steering indicator turn off cam;</span><br><span></span><span>(v) differentials;</span><br><span></span><span>(w) differential components being ANY of the following:</span><br><span></span><span>(i) differential carriers and cases;</span><br><span></span><span>(ii) crown wheels and pinions;</span><br><span></span><span>(iii) differential and axle shaft gears;</span><br><span></span><span>(iv) differential lockers;</span><br><span></span><span>(v) bearing caps, locking pins and locking clips;</span><br><span></span><span>(x) transmission shafts, including propeller and half shafts,</span><br><span></span><span>transmission gears and transmission housings (casings), gear</span><br><span></span><span>selection mechanisms, gear levers and gear change rod;</span><br><span></span><span>(y) gearbox parts being ANY of the following:</span><br><span></span><span>(i) selector forks, sleeves, detents, and housing plates</span><br><span></span><span>(ii) gearbox filler plug and reverse gear relay lever;</span><br><span></span><span>(iii) gearbox housings and interlock plunges;</span><br><span></span><span>(iv) clutch release arms;</span><br><span></span><span>(v) synchromesh rings and counter shafts;</span><br><span></span><span>(vi) blocker rings;</span><br><span></span><span>(vii) retaining clips;</span><br><br><span></span><span>(Continued on next page)</span></p></td><td style="width:60.1pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p style="text-align:center"><span>50</span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr style="height:68.1pt"><td style="border-top:0.75pt solid #000000; vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 14</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:3.75pt"><td colspan="2" style="width:57.95pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p><span></span></p></td><td style="width:375.45pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span></span><span>(Continued from previous page)</span><br><br><span></span><span>(viii) sandwich plates;</span><br><span></span><span>(ix) speedometer driving gear;</span><br><span></span><span>(x) spacers;</span><br><span></span><span>(xi) bearing carriers;</span><br><span></span><span>(xii) locating ball;</span><br><span></span><span>(xiii) countershaft and countershaft gear;</span><br><span></span><span>(xiv) reverse idler shafts and synchronisers;</span><br><span></span><span>(xv) baulk rings;</span><br><span></span><span>(z) dust seals and cabin fume excluders;</span><br><span></span><span>(aa) pipejunctions;</span><br><span></span><span>(bb) exhaust mounting brackets, plates, ribs and pipe straps;</span><br><span></span><span>(cc) gearbox tie down straps;</span><br><span></span><span>(dd) ornamental trimmings or fixtures;</span><br><span></span><span>(ee) number plates and number plate bezels and trims;</span><br><span></span><span>(ff) interior trim, cut to fit;</span><br><span></span><span>(gg) interior and exterior mouldings;</span><br><span></span><span>(hh) dashboard, instrument, console and speaker bezels;</span><br><span></span><span>(ii) ornaments proclaiming the make, model, style or accessory</span><br><span></span><span>level of a vehicle;</span><br><span></span><span>(jj) air ductings;</span><br><span></span><span>(kk) flexible cabriolet hoods;</span><br><span></span><span>(ll) chassis reinforcing mountings;</span><br><span></span><span>(mm) inner wing reinforcement;</span><br><span></span><span>(nn) door striker plates, door blanking plates and footrests;</span><br><span></span><span>(oo) handbrake levers and handbrake lever mechanisms;</span><br><span></span><span>(pp) cables;</span><br><span></span><span>(qq) aeroscreens;</span><br><span></span><span>(rr) ashtrays and gloveboxes;</span><br><span></span><span>(ss) door filler strips;</span><br><span></span><span>(tt) door window glass runners and guides;</span><br><span></span><span>(uu) window winder mechanisms;</span><br><span></span><span>(vv) side panel crash rail;</span><br><span></span><span>(ww) door kick plates and panels, heel boards;</span><br><span></span><span>(xx) panel release clips;</span><br><span></span><span>(yy) fan blades;</span><br><span></span><span>(zz) sun visors, sun visor mountings and brackets;</span><br><span></span><span>(aaa) flexible boots (commonly known as gaiters or bellows);</span><br><span></span><span>(bbb) consoles, placed between the driver and front seat</span><br><span></span><span>passengers;</span><br><span></span><span>(ccc) header rails;</span><br><span></span><span>(ddd) control knobs, layers, buttons and panels;</span><br><span></span><span>(eee) choke and accelerator cable stops;</span><br><span></span><span>(fff) heater;</span><br><span></span><span>(ggg) heater facia panels;</span><br><span></span><span>(hhh) grease caps;</span><br><span></span><span>(iii) steering wheel bosses;</span><br><span></span><span>(jjj) moulding and trim beading strips;</span><br><span></span><span>(kkk) reinforcing plates;</span><br><span></span><span>(lll) fuel pumps;</span><br><span></span><span>(mmm) door pulls;</span><br><span></span><span>(nnn) kingpins;</span><br><span></span><span>(ooo) tonneau pegs;</span><br><span></span><span>(ppp) radiator header tanks, diaphragms and cores;</span><br><span></span><span>(qqq) head rests</span><br><br><span>Op. 01.01.07</span><span style="width:254.24pt; display:inline-block"> </span><span>- TC 0614559</span></p></td><td style="width:60.1pt; border-top:0.75pt solid #000000; padding:5.28pt 5.4pt 2.85pt; vertical-align:top"><p style="text-align:center"><span></span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 15</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:558.75pt"><td colspan="2" style="width:57.95pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p><span>8708.99.91</span></p></td><td style="width:375.45pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><a id="AtStart"></a><span>PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years</span><br><span>before the goods are entered for home consumption, or reproductions</span><br><span>of these parts, being ANY of the following:</span><br><span></span><span>(a) suspension components being ANY of the following:</span><br><span></span><span>(i) top or bottom control arms;</span><br><span></span><span>(ii) uprights, struts and wheel hubs;</span><br><span></span><span>(iii) anti sway bars and ball joints;</span><br><span></span><span>(iv) anti tramp bars and torsion bars;</span><br><span></span><span>(v) suspension bushes, links, bump stops and shackles;</span><br><span></span><span>(vi) wishbones and wishbone mountings;</span><br><span></span><span>(vii) bump stop spacers;</span><br><span></span><span>(viii) sway bar links;</span><br><span></span><span>(ix) suspension spring mounting plates and pads;</span><br><span></span><span>(b) brake and clutch bleeding nipples;</span><br><span></span><span>(c) hood retaining pins;</span><br><span></span><span>(d) chassis or monocoque;</span><br><span></span><span>(e) instrument and dashboard panels;</span><br><span></span><span>(f) radiator ducting (shrouds or cowlings);</span><br><span></span><span>(g) stub axles;</span><br><span></span><span>(h) fuel and oil tanks, fillers, necks and caps;</span><br><span></span><span>(i) roll over hoops or bars but NOT including roll cages;</span><br><span></span><span>(j) dipsticks;</span><br><span></span><span>(k) roll bar adjustment control levers;</span><br><span></span><span>(l) brake balance adjusters control levers;</span><br><span></span><span>(m) pedal mechanisms, pedal, pedal mountings, pedal stops, pedal</span><br><span></span><span>push rod;</span><br><span></span><span>(n) universal joints and constant velocity (CV) joints;</span><br><span></span><span>(o) chassis identity plates;</span><br><span></span><span>(p) steering idler arms and idler arm brackets;</span><br><span></span><span>(q) track rods and drop arms;</span><br><span></span><span>(r) steering link arms;</span><br><span></span><span>(s) steering box parts being ANY of the following:</span><br><span></span><span>(i) steering box housings and casings;</span><br><span></span><span>(ii) rocker shaft;</span><br><span></span><span>(iii) thrust buttons;</span><br><span></span><span>(iv) cover plate;</span><br><span></span><span>(v) filler plug;</span><br><span></span><span>(vi) shims;</span><br><span></span><span>(vii) rocker shaft bush;</span><br><span></span><span>(viii) steering rack mounting brackets;</span><br><span></span><span>(t) steering column surrounds, shrouds and facias;</span><br><span></span><span>(u) steering indicator turn off cam;</span><br><span></span><span>(v) differentials;</span><br><span></span><span>(w) differential components being ANY of the following:</span><br><span></span><span>(i) differential carriers and cases;</span><br><span></span><span>(ii) crown wheels and pinions;</span><br><span></span><span>(iii) differential and axle shaft gears;</span><br><span></span><span>(iv) differential lockers;</span><br><span></span><span>(v) bearing caps, locking pins and locking clips;</span><br><span></span><span>(x) transmission shafts, including propeller and half shafts,</span><br><span></span><span>transmission gears and transmission housings (casings), gear</span><br><span></span><span>selection mechanisms, gear levers and gear change rod;</span><br><span></span><span>(y) gearbox parts being ANY of the following:</span><br><span></span><span>(i) selector forks, sleeves, detents, and housing plates</span><br><span></span><span>(ii) gearbox filler plug and reverse gear relay lever;</span><br><span></span><span>(iii) gearbox housings and interlock plunges;</span><br><span></span><span>(iv) clutch release arms;</span><br><span></span><span>(v) synchromesh rings and counter shafts;</span><br><span></span><span>(vi) blocker rings;</span><br><span></span><span>(vii) retaining clips;</span></p><p class="RomanBodyText"><span></span><span>(Continued on next page)</span><br><span></span></p></td><td style="width:60.1pt; border-bottom:0.75pt solid #000000; padding:5.65pt 5.4pt 2.48pt; vertical-align:top"><p style="text-align:center"><span>50</span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr style="height:61.2pt"><td style="border-top:0.75pt solid #000000; vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 16</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A
TABLE B
| Description of Goods including theCustoms Tariff Classification | Schedule 4 Item Number Last date of effect |
|---|
<table cellspacing="0" cellpadding="0" style="width:526.75pt; border-collapse:collapse"><tbody><tr style="height:102.75pt"><td colspan="2" style="width:57.95pt; border-top:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding:5.28pt 5.4pt 2.48pt; vertical-align:top"><p><span></span></p></td><td style="width:375.45pt; border-top:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding:5.28pt 5.4pt 2.48pt; vertical-align:top"><p class="RomanBodyText" style="margin-top:0pt"><span></span><span>(Continued from previous page)</span><br><br><span></span><span>(viii) sandwich plates;</span><br><span></span><span>(ix) speedometer driving gear;</span><br><span></span><span>(x) spacers;</span><br><span></span><span>(xi) bearing carriers;</span><br><span></span><span>(xii) locating ball;</span><br><span></span><span>(xiii) countershaft and countershaft gear;</span><br><span></span><span>(xiv) reverse idler shafts and synchronisers;</span><br><span></span><span>(xv) baulk rings;</span><br><span></span><span>(z) dust seals and cabin fume excluders;</span><br><span></span><span>(aa) pipejunctions;</span><br><span></span><span>(bb) exhaust mounting brackets, plates, ribs and pipe straps;</span><br><span></span><span>(cc) gearbox tie down straps;</span><br><span></span><span>(dd) ornamental trimmings or fixtures;</span><br><span></span><span>(ee) number plates and number plate bezels and trims;</span><br><span></span><span>(ff) interior trim, cut to fit;</span><br><span></span><span>(gg) interior and exterior mouldings;</span><br><span></span><span>(hh) dashboard, instrument, console and speaker bezels;</span><br><span></span><span>(ii) ornaments proclaiming the make, model, style or accessory</span><br><span></span><span>level of a vehicle;</span><br><span></span><span>(jj) air ductings;</span><br><span></span><span>(kk) flexible cabriolet hoods;</span><br><span></span><span>(ll) chassis reinforcing mountings;</span><br><span></span><span>(mm) inner wing reinforcement;</span><br><span></span><span>(nn) door striker plates, door blanking plates and footrests;</span><br><span></span><span>(oo) handbrake levers and handbrake lever mechanisms;</span><br><span></span><span>(pp) cables;</span><br><span></span><span>(qq) aeroscreens;</span><br><span></span><span>(rr) ashtrays and gloveboxes;</span><br><span></span><span>(ss) door filler strips;</span><br><span></span><span>(tt) door window glass runners and guides;</span><br><span></span><span>(uu) window winder mechanisms;</span><br><span></span><span>(vv) side panel crash rail;</span><br><span></span><span>(ww) door kick plates and panels, heel boards;</span><br><span></span><span>(xx) panel release clips;</span><br><span></span><span>(yy) fan blades;</span><br><span></span><span>(zz) sun visors, sun visor mountings and brackets;</span><br><span></span><span>(aaa) flexible boots (commonly known as gaiters or bellows);</span><br><span></span><span>(bbb) consoles, placed between the driver and front seat</span><br><span></span><span>passengers;</span><br><span></span><span>(ccc) header rails;</span><br><span></span><span>(ddd) control knobs, layers, buttons and panels;</span><br><span></span><span>(eee) choke and accelerator cable stops;</span><br><span></span><span>(fff) heater;</span><br><span></span><span>(ggg) heater facia panels;</span><br><span></span><span>(hhh) grease caps;</span><br><span></span><span>(iii) steering wheel bosses;</span><br><span></span><span>(jjj) moulding and trim beading strips;</span><br><span></span><span>(kkk) reinforcing plates;</span><br><span></span><span>(lll) fuel pumps;</span><br><span></span><span>(mmm) door pulls;</span><br><span></span><span>(nnn) kingpins;</span><br><span></span><span>(ooo) tonneau pegs;</span><br><span></span><span>(ppp) radiator header tanks, diaphragms and cores;</span><br><span></span><span>(qqq) head rests</span><br><br><a id="AtEnd"></a><span>Op. 01.01.07</span><span style="width:254.24pt; display:inline-block"> </span><span>- TC 0614560</span></p></td><td style="width:60.1pt; border-top:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding:5.28pt 5.4pt 2.48pt; vertical-align:top"><p style="text-align:center"><span></span></p></td><td style="border-bottom:0.75pt solid #000000; vertical-align:top"></td></tr><tr><td style="border-top:0.75pt solid #000000; vertical-align:top"></td><td colspan="4" style="width:511.7pt; border:0.75pt solid #000000; padding:8.12pt 6.72pt 5.28pt; vertical-align:top"><p class="Published" style="margin-top:12pt; margin-bottom:6pt"><span style="font-family:'Courier New', monospace">This is page 17</span><span class="PageNumber" style="font-family:'Courier New', monospace"> of 17 Pages</span><span style="font-family:'Courier New', monospace"> of the instrument.</span></p><p class="Published"><span style="width:316.77pt; display:inline-block"></span><span style="font-family:'Courier New', monospace">..Robert Crawford......................</span></p><p><span>Dated 20 June 2007</span><span style="width:230.36pt; display:inline-block"> </span><span>Delegate of the Chief Executive Officer</span></p><p class="Footer"><span></span></p></td></tr><tr style="height:0pt"><td style="width:0.85pt"></td><td style="width:67.9pt"></td><td style="width:386.25pt"></td><td style="width:70.9pt"></td><td style="width:0.85pt"></td></tr></tbody></table>
Revocation Instrument HS2007/574A