Commonwealth legislation

Tariff Concession Order 1041006

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Tariff Concession Order makes a specific needle-felt product (tariff heading 5602.10.00) subject to item 50 in Part III of Schedule 4 to the Customs Tariff Act 1995, effective 6 September 2010 until revoked. It is a narrowly‑worded, technical concession defined by precise physical and performance requirements. The declaration was made by a delegate of the Chief Executive Officer under s.269P and can be ended under ss.269SC or 269SD.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in Tariff Concession Order 1041006.

Tariff Concession Order 1041006

TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, Wendy Knowles, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 06.09.10 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2.

THE TABLE

COLUMN 1Description of Goods including theCustoms Tariff Classification	COLUMN 2Schedule 4 Item NumberLast date of effect

5602.10.00	NEEDLE FELT, comprising polyimide fibre, scrim supported, havingALL of the following:(a) weight NOT less than 450 g/m2 and NOT greater than800 g/m2;(b) thickness NOT less than 1.5 mm under 20 g/cm2 pressure andNOT greater than 2.1 mm under 20 g/cm2 pressure;(c) air permeability NOT less than 100 L/dm3/dm2/min at 20 mmwater gauge and NOT greater than 250 L/dm3/dm2/min at 20mm water gauge;(d) continuous operating temperature NOT greater than 180degrees C with less than 35 percent moisture;(e) polytetrafluoroethylene (PTFE) emulsion finishOp. 06.09.10 - TC 1041006	50

This is page 1 of 1 Page of the above Table......................Wendy Knowles ..................Dated 29 November 2010 Delegate of the Chief Executive Officer

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 Tariff Concession Order 1041006

THE TABLE

COLUMN 1Description of Goods including theCustoms Tariff Classification	COLUMN 2Schedule 4 Item NumberLast date of effect

5602.10.00	NEEDLE FELT, comprising polyimide fibre, scrim supported, havingALL of the following:(a) weight NOT less than 450 g/m2 and NOT greater than800 g/m2;(b) thickness NOT less than 1.5 mm under 20 g/cm2 pressure andNOT greater than 2.1 mm under 20 g/cm2 pressure;(c) air permeability NOT less than 100 L/dm3/dm2/min at 20 mmwater gauge and NOT greater than 250 L/dm3/dm2/min at 20mm water gauge;(d) continuous operating temperature NOT greater than 180degrees C with less than 35 percent moisture;(e) polytetrafluoroethylene (PTFE) emulsion finishOp. 06.09.10 - TC 1041006	50

This is page 1 of 1 Page of the above Table......................Wendy Knowles ..................Dated 29 November 2010 Delegate of the Chief Executive Officer