Commonwealth legislation

Tariff Concession Order 0922187

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

4/10 complexity

This Tariff Concession Order (TCO 0922187) designates a narrowly‑described class of hot‑dip zinc coated steel as goods to which a Part III Schedule 4 tariff item applies, effective 29 June 2009. It affects importers and downstream manufacturers of steel meeting the listed technical specifications by changing their customs tariff treatment; importers must present products that match the size, strength, elongation and coating mass requirements to obtain the concession, and the order stays in force until revoked.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in Tariff Concession Order 0922187.

Tariff Concession Order 0922187

TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, Wendy Knowles, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 29.06.09 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2.

THE TABLE

COLUMN 1Description of Goods including theCustoms Tariff Classification	COLUMN 2Schedule 4 Item NumberLast date of effect

7210.49.00	STEEL, hot dip zinc coated, complying with Japanese IndustrialStandard JIS G 3302:2007, having ALL of the following:(a) yield strength NOT less than 275 N/mm2 and NOT greater than380 N/mm2;(b) tensile strength NOT less than 440 N/mm2;(c) elongation NOT less than 29% and NOT greater than 41%;(d) coating mass NOT less than 45 g/m2 and NOT greater than 65g/m2;(e) ANY of the following sizes:(i) thickness 1.20 mm and width NOT less than 800 mmand NOT greater than 1 145 mm;(ii) thickness 1.40 mm and width NOT less than 715 mmand NOT greater than 1 560 mm;(iii) thickness 1.60 mm and width NOT less than 1 097 mmand NOT greater than 1 350 mm;(iv) thickness 1.80 mm and width NOT less than 600 mmand NOT greater than 1 350 mmFor the purposes of this Order, tolerances allowable forthickness sizes of specification (e) are + or - 5%Op. 29.06.09 - TC 0922187	5029.08.09

This is page 1 of 1 Page of the above Table..................Wendy Knowles ......................Dated 18 September 2009 Delegate of the Chief Executive Officer

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 Tariff Concession Order 0922187

THE TABLE

COLUMN 1Description of Goods including theCustoms Tariff Classification	COLUMN 2Schedule 4 Item NumberLast date of effect

7210.49.00	STEEL, hot dip zinc coated, complying with Japanese IndustrialStandard JIS G 3302:2007, having ALL of the following:(a) yield strength NOT less than 275 N/mm2 and NOT greater than380 N/mm2;(b) tensile strength NOT less than 440 N/mm2;(c) elongation NOT less than 29% and NOT greater than 41%;(d) coating mass NOT less than 45 g/m2 and NOT greater than 65g/m2;(e) ANY of the following sizes:(i) thickness 1.20 mm and width NOT less than 800 mmand NOT greater than 1 145 mm;(ii) thickness 1.40 mm and width NOT less than 715 mmand NOT greater than 1 560 mm;(iii) thickness 1.60 mm and width NOT less than 1 097 mmand NOT greater than 1 350 mm;(iv) thickness 1.80 mm and width NOT less than 600 mmand NOT greater than 1 350 mmFor the purposes of this Order, tolerances allowable forthickness sizes of specification (e) are + or - 5%Op. 29.06.09 - TC 0922187	5029.08.09

This is page 1 of 1 Page of the above Table..................Wendy Knowles ......................Dated 18 September 2009 Delegate of the Chief Executive Officer