Commonwealth legislation

Tariff Concession Order 0713878

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Tariff Concession Order (TCO) declares that a specific grade of glass‑filled polyamide 6 resin (detailed physical and thermal specifications with ±5% tolerances) is covered by Item 50 in Part III of Schedule 4 to the Customs Tariff Act 1995. A delegate of the Chief Executive Officer used section 269P of the Customs Act 1901 to apply the concession from 31.08.2007; it stays in force until revoked under sections 269SC or 269SD. It primarily affects importers and downstream users by changing the tariff treatment of that exact product.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in Tariff Concession Order 0713878.

Tariff Concession Order 0713878

TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, Conor Annesley, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 31.08.07 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2.

THE TABLE

COLUMN 1Description of Goods including theCustoms Tariff Classification	COLUMN 2Schedule 4 Item NumberLast date of effect

3908.10.00	RESINS, GLASS FILLED POLYAMIDE 6, having ALL of the following:(a) dry or conditioned tensile modulus 9 500/6 200 MPa;(b) density 1 360 kg/m3;(c) melt volume flow rate (MVR) 50 cm3/10 minutes;(d) 30% glass fibre reinforcement;(e) minimum 2 hour maximum service temperature at 200 oC;(f) heat distortion temperature of 210 oC using a 1.8 MPa loadTolerances of + 5% and - 5% are allowable for specifications (a)through to (d)Op. 31.08.07 - TC 0713878	50

This is page 1 of 1 Page of the above Table...Conor Annesley.......................Dated 22 February 2008 Delegate of the Chief Executive Officer

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 Tariff Concession Order 0713878

THE TABLE

COLUMN 1Description of Goods including theCustoms Tariff Classification	COLUMN 2Schedule 4 Item NumberLast date of effect

3908.10.00	RESINS, GLASS FILLED POLYAMIDE 6, having ALL of the following:(a) dry or conditioned tensile modulus 9 500/6 200 MPa;(b) density 1 360 kg/m3;(c) melt volume flow rate (MVR) 50 cm3/10 minutes;(d) 30% glass fibre reinforcement;(e) minimum 2 hour maximum service temperature at 200 oC;(f) heat distortion temperature of 210 oC using a 1.8 MPa loadTolerances of + 5% and - 5% are allowable for specifications (a)through to (d)Op. 31.08.07 - TC 0713878	50

This is page 1 of 1 Page of the above Table...Conor Annesley.......................Dated 22 February 2008 Delegate of the Chief Executive Officer