22Directions by Corporation for non-standard work

22 Directions by Corporation for non-standard work

22 Directions by Corporation for non-standard work

(1) The Corporation may, by written notice served on a person who is carrying out or has completed the kind of work to which the Act, section 48A(1) applies, direct the person to do one or both of the following—

(a) repair the work, in the way specified by the Corporation, if the work is not being or has not been done—

(i) to a standard expected of a tradesperson, or

(ii) in accordance with the Plumbing Code of Australia, or

(iii) in accordance with a condition of an authorisation that applies to the work,

(b) repair a fitting used in the work, in the way specified by the Corporation, if the fitting is—

(i) defective, or

(ii) not an approved fitting.

(2) A direction must be given no later than 6 years after the work to which the direction relates is completed.

(3) A person must comply with a direction given to the person under this section.

Maximum penalty—

(a) for a corporation—200 penalty units, or

(b) otherwise—100 penalty units.