Schedule 10 Conditions applying to complying development certificates under the Fire Safety Code

Schedule 10 Conditions applying to complying development certificates under the Fire Safety Code

(Clause 8.8)

Note 1.

Complying development under the Fire Safety Code must comply with the requirements of the Act, the Environmental Planning and Assessment Regulation 2000 and the conditions listed in this Schedule.

Note 2.

Division 2A of Part 7 of the Environmental Planning and Assessment Regulation 2000 specifies conditions to which certain complying development certificates are subject.

Note 3.

In addition to the requirements specified for development under this Policy, adjoining owners’ property rights, applicable common law and other legislative requirements for approvals, licences, permits and authorities still apply.

Note 4.

If the development is in the proximity of infrastructure (including water, stormwater or sewer mains, electricity power lines and telecommunications facilities), the relevant infrastructure authority should be contacted before commencing the development.

Note 5.

Under section 4.29 of the Environmental Planning and Assessment Act 1979 a complying development certificate lapses 5 years after the date endorsed on the certificate, unless the development has physically commenced on the land during that period.

sch 10: Ins 2013 (706), Sch 1 [184]. Am 2018 (68), Sch 2 [1]; 2021 (16), Sch 1[135]: 2023 (458), Sch 3.1[6].