46Additional limitations for table item 11

46 Additional limitations for table item 11

(1) A radiocommunications transmitter must only be operated indoors. (2) The power spectral density of a radiocommunications transmitter must not be greater than: (a) 10 mW EIRP per 1 MHz, if the transmitter has a bandwidth equal to or greater than 1 MHz; or (b) 40 µW per 4 kHz, if the transmitter has a bandwidth less than 1 MHz. (3) A radiocommunications transmitter must use: (a) Dynamic Frequency Selection; and (b) if the transmitter is operated with a maximum EIRP greater than 100 mW – Transmit Power Control.

Note: IEEE 802.11 Telecommunications and Information Exchange between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 11: Wireless LANB Medium Access Control (MAC) and Physical Layer (PHY) Specifications provides for Dynamic Frequency Selection and Transmit Power Control. IEEE 802.11 is published by the Institute of Electrical and Electronics Engineers and is available for purchase from the Institute’s website at www.ieee.org.