The AUSTRALIAN COMMUNICATIONS AUTHORITY issues this Notice under section 182 of the Radiocommunications Act 1992.
Dated 2 November 2001
A.J SHAW Chair
G.W LUTHER Senior Executive Manager
Australian Communications Authority
Contents
Page
Part 1 Preliminary
1 Name of Notice 3
2 Commencement 3
3 Definitions 3
4 Revocation 6
5 Application of this Notice to devices 6
6 Relationship between this Notice and the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 7
Part 2 Form and placement of a compliance label
7 Who must apply a compliance label to a device 8
8 What is a compliance label 8
Part 3 Requirements to be met before a label may be applied
Division 3.1 Application of Part 3
9 No application to variants of a device 10
Division 3.2 Permission to use regulatory marks and issue supplier code numbers
10 Notification 10
11 Declaration of conformity 11
Division 3.3 Compliance levels
12 Compliance levels 11
13 Compliance level 1 11
14 Compliance level 2 11
15 Compliance level 3 12
Division 3.4 Testing of devices
16 Testing 12
Division 3.5 Technical assessment of devices
17 Technical assessment 12
18 Making an application for technical assessment 12
19 Decision of competent body 13
Part 4 Requirements to be met after labels applied
Division 4.1 Keeping of records
20 Compliance records — general requirements 14
21 Keeping of records 14
22 Records showing compliance under section 16 — testing 14
23 Records showing compliance under Division 3.5 — technical assessment 15
Division 4.2 Availability of compliance records for inspection
24 Where compliance records are to be available 15
25 Provision of information to authorised officer 15
26 Testing of items by testing body 16
Part 5 Requirements to be met after labels applied — devices imported from New Zealand
27 Purpose of Part 5 17
28 Application of Part 5 17
29 Importer taken to have labelled device 17
30 Provision of information to authorised officer 17
31 Testing of items by testing body 18
Schedule 1 Labels 19
Part 1 The labels 19
Part 2 The Marks 19
Schedule 2 Standards 21
Schedule 3 Notification and Application to use C‑Tick mark 22
Schedule 4 Supplier’s Declaration of Conformity 24
Part 1 Preliminary
1 Name of Notice
This Notice is the Radiocommunications (Compliance Labelling — Incidental Emissions) Notice 2001.
2 Commencement
This Notice commences on gazettal.
3 Definitions
(1) In this Notice, unless the contrary intention appears:
accredited testing body means a laboratory that is accredited, for this Notice, by:
(a) NATA; or
(b) a body that:
(i) has entered into a mutual recognition agreement with NATA; or
(ii) has entered into a mutual recognition agreement under the Agreement on Mutual Recognition on Conformity Assessment Certification and Marking made between Australia and the European Community on 24 June 1998; or
(iii) has entered into a mutual recognition agreement under an agreement about mutual recognition on conformity assessment certification and marking made between Australia and a foreign country or the European Union.
Act means the Radiocommunications Act 1992.
agent, of a manufacturer or importer, means a person who is authorised in writing by the manufacturer or importer to act in Australia as an agent of the manufacturer or importer for Division 7 of Part 4.1 of the Act.
applicable standard, for a device, means a standard that applies to the device under the Radiocommunications (Electromagnetic Compatibility) Standard 2001.
authorised officer means:
(a) an inspector under subsection 267 (1) of the Act; or
(b) a person authorised in writing by the ACA for sections 25 and 26.
competent body means a body determined to be a competent body in an instrument made under subsection 183 (3) of the Act.
compliance label has the meaning given by subsection 8 (1).
Note Section 6 extends some references to ‘compliance label’ in this Notice to include a compliance label under the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001.
compliance mark means any of the marks in Part 2 of Schedule 1.
compliance record has the meaning given by subsection 20 (1).
C-Tick mark means the mark set out in Part 2 of Schedule 1.
declaration of conformity means a declaration that:
(a) is in the form set out in Schedule 4; or
(b) contains the information required in the form set out in Schedule 4, whether or not the declaration is accompanied by other material.
Note Suppliers are not required to copy the declaration set out in Schedule 4. They may create their own forms, which contain, as a minimum, the information mentioned in Schedule 4.
description of the device means sufficient information for a person to determine whether the device is the same as a device for which a declaration of conformity, test report or statement by a competent body was prepared.
Note The description of a device may include a photograph or sketch or other pictorial representation of the device illustrating its internal and external aspects (including printed circuit boards).
device means a device to which a standard applies.
high-risk device has the meaning given by subsection (3).
low-risk device means a device:
(a) the operation of which has a low interference impact on other devices using the radiofrequency spectrum; and
(b) that contains any of the following items:
(i) manually operated switches;
(ii) simple relays;
(iii) brushless squirrel cage induction motors;
(iv) conventional AC/AC transformers;
(v) resistive elements (for instance, heating elements).
Examples of devices that are not low-risk devices
1 A switched mode power supply.
2 An electronic transformer.
3 A lighting ballast or an electronic lighting ballast.
4 A microprocessor or other clocked digital device.
5 A commutator or slip ring motor.
6 A motor speed controller.
medium-risk device means a device that is not:
(a) a high-risk device; or
(b) a low-risk device.
NATA means the National Association of Testing Authorities, Australia.
New Zealand Notice means the New Zealand Radiocommunications (Electromagnetic Compatibility Compliance) Notice 2001, as in force from time to time.
Note The New Zealand Radiocommunications (Electromagnetic Compatibility Compliance) Notice 2001 is made under subregulation 32 (1) of the New Zealand Radiocommunications Regulations 2001. Those Regulations are made under paragraph 134 (1) (g) of the New Zealand Radiocommunications Act 1989.
product identification code, for a device, means the written information used by the supplier of the device to identify the device.
RCM means the Regulatory Compliance Mark set out in Part 2 of Schedule 1.
Note The RCM is reproduced from the Appendix to AS/NZS 4417.
standard means a standard specified in Schedule 2.
Note Standards are made under section 162 of the Act.
supplier means:
(a) in relation to an imported device — the importer or agent of the importer; and
(b) in relation to a device manufactured in Australia — the manufacturer or the agent of the manufacturer.
supplier code number means a code number issued to a person:
(a) in accordance with a notice made by the ACA under section 407 of the Telecommunications Act 1997; or
(b) in accordance with a notice made by the ACA under section 182 of the Act; or
(c) by Standards Australia International Limited under AS/NZS 4417.
variant means a version of a device that is not identical to the device but is not sufficiently different from the device to affect the application to that version of a standard that applies to the device.
working day, in relation to a request, means a day other than:
(a) a Saturday or a Sunday; or
(b) a day that is a public holiday or an Australian Public Service holiday in the place where the request is made.
(2) A reference in this Notice to a standard is a reference to the standard as in force from time to time.
(3) For this Notice, a high-risk device means a device that includes any of the following equipment:
(a) Group 2 ISM equipment for AS/NZS 2064 (which deals with industrial, scientific and medical radiofrequency equipment);
(b) telecommunications terminal equipment for AS/NZS 3548 (which deals with information technology equipment).
(4) Paragraph (3) (b) applies for the period of 2 years starting on the date of commencement of this Notice.
(5) A reference in this Notice to a document with the prefix ‘AS/NZS’ is a reference to a document that is a joint Australian and New Zealand Standard approved for publication on behalf of the Standards organisations of those countries, as in force from time to time.
(6) Reference may be made in this Notice to an Australian and New Zealand Standard by number alone without inclusion of the edition or year of publication of the standard.
Example
AS/NZS 4417.1:1996 may be referred to as AS/NZS 4417.1.
(7) A reference in this Notice to a device that complies with New Zealand labelling legislation is a reference to a device for which the following criteria are satisfied:
(a) the device complies, within the meaning of the New Zealand Notice, with an applicable standard mentioned in table 2, 3 or 4 of Schedule A to that Notice;
(b) the supplier of the device, within the meaning of the New Zealand Notice, has the documents mentioned in paragraph 7 (a) of that Notice;
(c) the device is labelled with a compliance mark within the meaning of the New Zealand Notice.
4 Revocation
The following instruments are revoked:
Radiocommunications (Compliance Labelling — Incidental Emissions) Notice 1998, made on 21 December 1998
Radiocommunications (Compliance Labelling — Incidental Emissions) Amendment Notice 2000 (No. 1), made on 11 August 2000.
5 Application of this Notice to devices
(1) Subject to subsection (3), this Notice applies to any device that:
(a) is manufactured in or imported into Australia for supply; and
(b) is a device to which a standard applies.
(2) This Notice does not apply to a device that is imported or manufactured otherwise than for supply in Australia.
(3) Parts 2, 3 and 4 of this Notice do not apply to any device that:
(a) is imported into Australia from New Zealand for supply; and
(b) complies with New Zealand labelling legislation.
Note Subsection 3 (7) explains when a device complies with New Zealand labelling legislation.
6 Relationship between this Notice and the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001
If a device to which this Notice applies is also customer equipment or customer cabling to which the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001, as in force from time to time, applies:
(a) the requirements in this Notice are additional to the requirements under that Notice; and
(b) Part 2 of this Notice does not apply in relation to the device; and
(c) a reference in this Notice (except subsection 3 (1)) to a compliance label includes a reference to a compliance label under that Notice.
Note An effect of paragraph (b) is that the supplier of a device that is to be labelled with an A-Tick under the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 is not required to label the device with a C-Tick as well.
Part 2 Form and placement of a compliance label
7 Who must apply a compliance label to a device
(1) If a device is manufactured in Australia, a label must be applied to the device as a compliance label by 1 of the following persons:
(a) the manufacturer;
(b) an agent of the manufacturer;
(c) a person who is authorised by the manufacturer, or an agent of the manufacturer, to apply labels on behalf of the manufacturer or agent.
Note A compliance label is described in subsection 8 (1).
(2) If a device is manufactured outside Australia, a label must be applied to the device as a compliance label by 1 of the following persons:
(a) the importer;
(b) an agent of the importer;
(c) a person outside Australia who is authorised by the importer or agent to apply labels on behalf of the importer or agent.
(3) This section does not apply to a low-risk device.
8 What is a compliance label
(1) A compliance label for a device is a label that meets the requirements of this section.
(2) The label must be in the form set out in Part 1 of Schedule 1.
(3) The label must include the information specified in at least 1 of the paragraphs in subsection (4) about:
(a) in relation to an imported device — the importer; and
(b) in relation to a device manufactured in Australia — the manufacturer.
(4) The information is the following:
(a) business name and business address in Australia;
(b) business name registered on the national business names register within the meaning of section 147 of the Corporations Act 2001;
(c) personal name and address of place of business in Australia;
(d) Australian Company Number or ACN under section 118 of the Corporations Act 2001;
(e) Australian Registered Body Number or ARBN under Part 5B.2 of the Corporations Act 2001;
(f) Australian Business Number or ABN under the A New Tax System (Australian Business Number) Act 1999;
(g) registered trade mark under the Trade Marks Act 1995;
(h) supplier code number issued by the ACA, or in respect of the RCM, by Standards Australia International Limited.
(5) Subject to subsections (6) and (7), the label must be:
(a) legible, with alphanumeric characters of at least 1 mm high and the compliance mark at least 3 mm high; and
(b) made of durable material; and
(c) applied to the device:
(i) permanently; or
(ii) in a way that would make it difficult to obliterate or remove the label; and
(d) applied:
(i) to the external surface of the device; and
(ii) if the external surface of the device displays the product identification code for the device, as near as practicable to that code.
(6) If it is not possible to apply the label to the external surface of the device because of the size or physical nature of the device, the label must be applied to the labelling or outer surface of the packaging associated with the device.
(7) If it is possible, but not practical, to apply the label to the external surface of the device, the label must be applied to 1 of the following items associated with the device (listed in order of priority):
(a) to the outer surface of the packaging;
(b) to the instructions for use;
(c) to the warranty or guarantee certificates.
(8) Before applying a label under subsection (7), the supplier must:
(a) apply in writing to the ACA for approval to apply the label, setting out the reasons why subsection (7) should apply; and
(b) tell the ACA about the intended placement of the label; and
(c) obtain written approval from the ACA to apply the label.
Part 3 Requirements to be met before a label may be applied
Division 3.1 Application of Part 3
9 No application to variants of a device
This Part does not apply in relation to a variant of a device if:
(a) the relevant requirements of this Part have been met in relation to the device; and
(b) the radiofrequency emission characteristics of the variant are not likely to exceed those of the device.
Division 3.2 Permission to use regulatory marks and issue supplier code numbers
10 Notification
(1) Before a supplier applies a label with a C-Tick mark to a device as a compliance label for the first time, the supplier must have obtained from the ACA:
(a) permission to use the C-Tick mark as part of the label; and
(b) a supplier code number.
(2) An application for permission and the supplier code number must be:
(a) in the form set out in Schedule 3; or
(b) in writing setting out the information required in the form set out in Schedule 3, whether or not the application is accompanied by other material.
Note Suppliers are not required to copy Schedule 3. They may create and submit their own forms, which must contain as a minimum the information mentioned in Schedule 3.
(3) Before a supplier applies a label with the RCM to a device as a compliance label for the first time, the supplier must register the supplier’s use of the RCM with the ACA in accordance with clause 4.6 of AS/NZS 4417.1, as if references in that Standard to the Spectrum Management Agency and SMA were references to the ACA.
(4) This section does not apply if the ACA has previously issued the supplier with a supplier code number and:
(a) an approval to use a mark under the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001, as in force from time to time; or
(b) an approval to use a mark under the Radiocommunications Devices (Compliance Labelling) Notice 1996, as in force from time to time.
11 Declaration of conformity
(1) Before a supplier of a device applies a label to the device as a compliance label, the supplier must make a declaration of conformity for the device.
(2) Subsection (1) is taken to be satisfied by an importer of a device, or an agent of the importer, who applies a label to the device as a compliance label without making a declaration of conformity for the device if:
(a) the device complies with an applicable standard; and
(b) the device was manufactured outside Australia; and
(c) the manufacturer of the device made a declaration of conformity for the device before the label was applied to the device.
(3) A reference to manufacturer in a declaration of conformity made in accordance with paragraph (2) (c) is taken to include a reference to a person who manufactures a device outside Australia.
Division 3.3 Compliance levels
12 Compliance levels
(1) Before a supplier applies a compliance label to a device, the supplier must comply with the compliance level for the device.
(2) The compliance level for a device is:
(a) for a low-risk device — compliance level 1; and
(b) for a medium-risk device — compliance level 2; and
(c) for a high-risk device — compliance level 3.
13 Compliance level 1
To comply with compliance level 1, the supplier of a device must:
(a) prepare a description of the device; and
(b) make a declaration of conformity for the device in accordance with section 11.
Note Subsection 11 (2) sets out the circumstances in which the requirement for a supplier of a device to make a declaration of conformity is taken to be satisfied by the overseas manufacturer of the device making the declaration.
14 Compliance level 2
To comply with compliance level 2, the supplier of a device must:
(a) comply with compliance level 1; and
(b) show conformity with an applicable standard by a report of the results of:
(i) tests under section 16; or
(ii) a technical assessment under Division 3.5.
15 Compliance level 3
To comply with compliance level 3, the supplier of a device must:
(a) comply with compliance level 1; and
(b) show conformity with an applicable standard by a report of the results of:
(i) tests under section 16 by an accredited testing body; or
(ii) a technical assessment under Division 3.5.
Division 3.4 Testing of devices
16 Testing
(1) If a device is tested for conformity with an applicable standard, the body that tests the device must issue a test report addressing:
(a) the tests it has used; and
(b) the results of those tests, including test data; and
(c) whether the results of the tests show that the device meets the applicable standard.
(2) A device tested for compliance level 3 must be carried out by an accredited testing body.
Division 3.5 Technical assessment of devices
17 Technical assessment
This Division applies if the supplier of a device applies to a competent body for technical assessment of the device and the supporting documentation to show that the device conforms with each applicable standard.
18 Making an application for technical assessment
(1) An application for technical assessment must:
(a) include sufficient information to enable technical assessment to be made; and
(b) be in writing; and
(c) be in English.
(2) An application under subsection (1) may be made in electronic form.
19 Decision of competent body
(1) If a competent body is satisfied that the application and accompanying material is not a sufficient basis for evaluating a device, the competent body:
(a) may tell the applicant to have the device tested by an accredited testing body; and
(b) may use the test results for evaluating the device; and
(c) may require the applicant to give it further information about the device, including test reports.
(2) If a competent body is satisfied, after evaluating a device, that the application and accompanying material is a sufficient basis for concluding that the device meets each applicable standard, the competent body must issue a technical assessment for the device.
(3) If a competent body is not satisfied, after evaluating a device, that the application and accompanying material is a sufficient basis for concluding that the device meets each applicable standard, the competent body must tell the applicant that it is not satisfied and give the applicant a written statement of the reasons why it is not satisfied.
Note Under section 174 of the Act, a person does not contravene section 160 of the Act by supplying a non-standard device in accordance with the ACA’s written permission. If the ACA decides to refuse to give such permission to a person who has applied to the ACA for it in a form approved by the ACA, the ACA must give to the person a written notice setting out reasons for its decision. In addition, the decision to refuse permission is reviewable under Part 5.6 of the Act.
Part 4 Requirements to be met after labels applied
Division 4.1 Keeping of records
20 Compliance records — general requirements
(1) A compliance record is a record that must be kept under section 21.
(2) A compliance record:
(a) must be in English; and
(b) may be a copy of an original record; and
(c) may be kept in electronic form.
21 Keeping of records
(1) If a supplier of a device applies a label to the device as a compliance label, the supplier must keep, for 5 years after the device has ceased to be supplied in Australia:
(a) the declaration of conformity relating to the device; and
(b) the description of the device; and
(c) for a medium-risk device or high-risk device for which compliance is shown under section 16 — the records mentioned in section 22; and
(d) for a medium-risk device or high-risk device for which compliance is shown under Division 3.5 — the records mentioned in section 23; and
(e) for a device to which a label is applied under subsection 8 (7) — records of the documents and information mentioned in subsection 8 (8).
(2) If an agent of a manufacturer or importer keeps records for the manufacturer or importer that must be kept under subsection (1), the agent must also keep a copy of its agency agreement with the manufacturer or importer for the same period as those records are kept.
22 Records showing compliance under section 16 — testing
For paragraph 21 (1) (c), the records are:
(a) the test report from a testing body showing that the device meets the applicable standard; and
(b) for a variant — a statement by the supplier that:
(i) identifies the device and its variant; and
(ii) describes the differences between the device and its variant; and
(iii) provides a technical rationale for the conformity of the variant.
23 Records showing compliance under Division 3.5 — technical assessment
For paragraph 21 (1) (d), the records are:
(a) documents submitted with an application for a technical assessment by a competent body; and
(b) the technical assessment by the competent body.
Division 4.2 Availability of compliance records for inspection
24 Where compliance records are to be available
If a supplier of a device applies a label to the device as a compliance label, the supplier must ensure that the compliance records for the device are available at the principal business address in Australia of the supplier.
25 Provision of information to authorised officer
(1) If a supplier of a device applies a label to the device as a compliance label, an authorised officer may, in writing, require the supplier to give to the officer specified compliance records for the device.
(2) If the request is for a specified record, the supplier must produce the record within 10 working days after the day specified in the request.
(3) If the request is for a specified circuit diagram or manual for the device, the supplier must produce the document within 30 working days after the day specified in the request.
(4) After receiving the information from the supplier, the authorised officer must give the supplier a receipt for the information supplied.
(5) The authorised officer must return the records to the supplier as soon as practicable and, in any case, not more than 60 days after receiving the document.
(6) If an authorised officer believes that the records kept by the supplier do not provide sufficient evidence that the device complies with each applicable standard, the officer may, in writing, require the supplier to give to the officer:
(a) a test report from an accredited testing body showing that the device either complies or does not comply with each applicable standard; or
(b) a report from a competent body confirming or rejecting the claims in the documentation of the supplier that the device complies with each applicable standard.
26 Testing of items by testing body
(1) If a supplier of a device applies a label to the device as a compliance label, an authorised officer may, in writing, require the supplier of a device to give up to 3 samples of the device to a laboratory accredited by NATA and specified by the officer, for testing whether the device complies with an applicable standard.
(2) The supplier must comply with the request within 10 working days after the day specified in the request.
(3) The supplier must attempt to obtain from the laboratory a receipt for the samples, specifying that they have been received and the date when they were received.
(4) On receiving a request from the ACA, the supplier must:
(a) give the receipt to the ACA; or
(b) if the supplier has been unable to obtain a receipt, satisfy the ACA that the supplier made reasonable attempts to obtain a receipt.
(5) The ACA must make arrangements to ensure that the samples are returned to the supplier within a reasonable period after they have been tested.
(6) In this section, device includes a variant of the device.
Part 5 Requirements to be met after labels applied — devices imported from New Zealand
27 Purpose of Part 5
This Part provides ways for the ACA to work out whether a device imported into Australia from New Zealand complies with New Zealand labelling legislation.
Note Subsection 3 (7) explains when a device complies with New Zealand labelling legislation.
28 Application of Part 5
This Part applies to a device that is imported into Australia from New Zealand.
29 Importer taken to have labelled device
For this Part, the importer of a device is taken to have labelled the device under Part 2.
30 Provision of information to authorised officer
(1) An authorised officer may, in writing, require the importer of a device to give to the officer specified New Zealand compliance records for the device.
(2) If the request is for a specified record, the importer must produce the record within 10 working days after the day specified in the request.
(3) If the request is for a specified circuit diagram or manual for the device, the importer must produce the document within 30 working days after the day specified in the request.
(4) After receiving the information from the importer, the authorised officer must give the importer a receipt for the information supplied.
(5) The authorised officer must return the records to the importer as soon as practicable and, in any case, not more than 60 days after receiving the document.
(6) If an authorised officer believes that records provided under this section by the importer do not provide sufficient evidence that the device complies with New Zealand labelling legislation, the officer may, in writing, require the importer to give to the officer:
(a) a test report from an accredited testing body showing that the device either complies or does not comply with an applicable standard under this Notice; or
(b) a report from a competent body that the device either complies or does not comply with an applicable standard under this Notice.
Note The applicable standard under this Notice for a device is the same standard as the applicable standard mentioned in table 2, 3 or 4 of Schedule A to the New Zealand Notice for the device.
(7) In this section:
New Zealand compliance records means the documents mentioned in paragraph 7 (a) of the New Zealand Notice.
31 Testing of items by testing body
(1) An authorised officer may, in writing, require the importer of a device to give up to 3 samples of the device to a laboratory accredited by NATA and specified by the officer, for testing whether the device complies with an applicable standard under this Notice.
Note The applicable standard for a device under this Notice is the same standard as the applicable standard mentioned in table 2, 3 or 4 of Schedule A to the New Zealand Notice for the device.
(2) The importer must comply with the request within 10 working days after the day specified in the request.
(3) The importer must attempt to obtain from the laboratory a receipt for the samples, specifying that they have been received and the date when they were received.
(4) On receiving a request from the ACA, the importer must:
(a) give the receipt to the ACA; or
(b) if the importer has been unable to obtain a receipt, satisfy the ACA that the supplier made reasonable attempts to obtain a receipt.
(5) The ACA must make arrangements to ensure that the samples are returned to the importer within a reasonable period after they have been tested.
(6) In this section, device includes a variant of the device.
Schedule 1 Labels
(subsections 3 (1) and 8 (1))
Part 1 The labels
Either the C-tick mark or the RCM
Information required under subsection 8 (3)
Part 2 The Marks
The C-Tick mark
Image unavailable in extracted text
Note The C-Tick mark is a protected symbol for section 188A of the Radiocommunications Act 1992.
The RCM
Image unavailable in extracted text
Note The RCM is a trademark owned by Australian and New Zealand regulators. Manufacturers or importers who intend to use the RCM should register with Standards Australia International Limited in accordance with AS/NZS 4417.1.
Schedule 2 Standards
(subsection 3 (1))
Item
Standard
1
Radiocommunications (Electromagnetic Compatibility) Standard 2001
Schedule 3 Notification and Application to use C‑Tick mark
(subsection 10 (2))
Application to use the C-Tick mark
<table cellspacing="0" cellpadding="0" style="border-collapse:collapse"><tbody><tr><td colspan="4" style="width:346.4pt; padding-right:4pt; padding-left:4pt; vertical-align:top; background-color:#dfdfdf"><p style="margin-top:6pt; margin-right:12.2pt; margin-bottom:3pt; font-size:10pt"><span style="font-weight:bold">Instructions for Completion:</span></p></td></tr><tr><td colspan="4" style="width:414.2pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; margin-bottom:3pt; font-size:9pt"><span>Please print clearly.</span><span> </span><span>Illegible, unclear or incomplete application forms may delay processing.</span><span></span></p><p style="margin-top:3pt; margin-bottom:3pt; font-size:9pt"><span style="font-weight:bold">Send completed forms by mail or fax to either:</span></p><p style="margin-top:3pt; font-size:9pt"><span>Manager — Radiocommunications Standards</span><span style="width:5.89pt; display:inline-block"> </span><span style="width:28.35pt; display:inline-block"></span><span>Product Declaration Officer</span></p><p style="font-size:9pt"><span>Australian Communications Authority</span><span style="width:3.27pt; display:inline-block"> </span><span style="width:28.35pt; display:inline-block"></span><span style="width:28.35pt; display:inline-block"></span><span>Ministry of Economic Development</span></p><p style="font-size:9pt"><span>PO Box 78</span><span style="width:16.69pt; display:inline-block"> </span><span style="width:28.35pt; display:inline-block"></span><span style="width:28.35pt; display:inline-block"></span><span style="width:28.35pt; display:inline-block"></span><span style="width:28.35pt; display:inline-block"></span><span style="width:28.35pt; display:inline-block"></span><span>PO Box 8562 Riccarton</span></p><p style="margin-bottom:3pt; font-size:9pt"><span>BELCONNEN</span><span> </span><span></span><span>ACT</span><span> </span><span></span><span>2616</span><span style="width:13.9pt; display:inline-block"> </span><span style="width:28.35pt; display:inline-block"></span><span style="width:28.35pt; display:inline-block"></span><span style="width:28.35pt; display:inline-block"></span><span>CHRISTCHURCH</span><span> </span><span>New Zealand</span></p><p style="margin-top:3pt; margin-bottom:3pt; font-size:9pt"><span>Facsimile: (02) 6219 5133</span><span style="width:18.16pt; display:inline-block"> </span><span style="width:28.35pt; display:inline-block"></span><span style="width:28.35pt; display:inline-block"></span><span style="font-size:8pt; font-weight:bold">or</span><span style="width:20.8pt; display:inline-block"> </span><span>Facsimile: (03) 343 1219</span></p><p style="margin-top:3pt; font-size:8pt"><span></span></p></td></tr><tr><td colspan="4" style="width:346.4pt; padding-right:4pt; padding-left:4pt; vertical-align:top; background-color:#dfdfdf"><p style="margin-top:6pt; margin-right:12.2pt; margin-bottom:3pt; font-size:10pt"><span style="font-weight:bold">Supplier </span><span style="font-size:9pt; font-weight:bold">(ie, manufacturer, importer or an authorised agent) </span><span style="font-weight:bold">Details:</span></p></td></tr><tr><td style="width:192.55pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><span>Name of Australian/New Zealand company (or partnership, trading trust or individual)</span></p></td><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; margin-bottom:3pt; font-size:9pt"><span>Australian Company Number (ACN), or</span></p><p style="margin-top:3pt; margin-bottom:3pt; font-size:9pt"><span>Australian Registered Body Number (ARBN), or</span></p><p style="margin-top:3pt; margin-bottom:3pt; font-size:9pt"><span>Australian Business Number (ABN), or</span></p><p style="margin-top:3pt; margin-bottom:3pt; font-size:9pt"><span>New Zealand Company Number (NZCN), or</span></p><p style="margin-top:3pt; font-size:9pt"><span>New Zealand GST Number</span></p></td></tr><tr style="height:20pt"><td style="width:192.55pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td></tr><tr><td style="width:192.55pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><br><span>Postal address</span></p></td><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><span>Street address (if same as postal address, write ‘same as postal address’)</span></p></td></tr><tr style="height:20pt"><td style="width:192.55pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="margin-top:8pt; margin-bottom:3pt; font-size:9pt"><span style="width:99.25pt; display:inline-block"></span><span></span><span>Postcode</span></p></td><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:8pt; font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="margin-top:8pt; font-size:9pt"><span style="width:99.25pt; display:inline-block"></span><span></span><span>Postcode</span></p></td></tr><tr><td style="width:192.55pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><span>Contact numbers</span></p></td><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><span></span></p></td></tr><tr style="height:20pt"><td style="width:192.55pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="margin-top:6pt; margin-bottom:3pt; font-size:9pt"><span>Phone (</span><span> </span><span>)</span></p></td><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="margin-top:6pt; margin-bottom:3pt; font-size:9pt"><span>Fax</span><span> </span><span>(</span><span> </span><span>)</span></p></td></tr><tr style="height:20pt"><td style="width:192.55pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="margin-top:6pt; margin-bottom:3pt; font-size:9pt"><span>Mobile (</span><span> </span><span>)</span></p></td><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="margin-top:6pt; margin-bottom:3pt; font-size:9pt"><span>Email:</span></p></td></tr><tr><td colspan="4" style="width:414.2pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><span>Street address where compliance records are accessible (if same as postal address, write ‘as above’)</span></p></td></tr><tr><td colspan="4" style="width:414.2pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="margin-top:6pt; margin-bottom:3pt; font-size:9pt"><span style="width:283.5pt; display:inline-block"></span><span></span><span>Postcode</span></p></td></tr><tr style="height:10pt"><td colspan="4" style="width:346.4pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="font-size:11pt"><span style="font-weight:bold"></span></p></td></tr><tr><td colspan="4" style="width:346.4pt; padding-right:4pt; padding-left:4pt; vertical-align:top; background-color:#dfdfdf"><p style="margin-top:6pt; margin-bottom:3pt; page-break-before:always; page-break-after:avoid; font-size:10pt"><span style="font-weight:bold">Declaration:</span></p></td></tr><tr><td rowspan="6" style="width:192.55pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; margin-bottom:5pt; font-size:8pt"><span>I advise that it is our intention to market electrical and electronic devices in Australia or New Zealand under the C-Tick mark.</span><span> </span><span>When marketing products in New Zealand I agree to the C-Tick licence conditions.</span><span></span></p><p style="margin-top:5pt; font-size:8pt"><span>I understand that products marked with the C-Tick mark may only be marketed where a complete Declaration of Conformity relating to the products has been made and there are adequate technical grounds for making a Declaration of Conformity in the form of a test report or Technical Construction File.</span></p></td><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="page-break-after:avoid; font-size:9pt"><span></span></p></td><td style="width:140.85pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; page-break-after:avoid; font-size:9pt"><span>Signature of supplier / agent</span></p></td><td style="width:55.8pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; page-break-after:avoid; font-size:9pt"><span>Date</span></p></td></tr><tr style="height:20pt"><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td><td style="width:140.85pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td><td style="width:55.8pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td></tr><tr><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; font-size:9pt"><span>Name (Print)</span></p></td></tr><tr style="height:20pt"><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td></tr><tr><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="page-break-after:avoid; font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; page-break-after:avoid; font-size:10pt"><span style="font-size:9pt">Position in </span><span>Organisation</span></p></td></tr><tr style="height:20pt"><td style="width:1pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td><td colspan="2" style="width:204.65pt; border:0.75pt solid #000000; padding-right:3.62pt; padding-left:3.62pt; vertical-align:top"><p style="font-size:9pt"><span></span></p></td></tr><tr><td colspan="4" style="width:346.4pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:6pt; margin-bottom:3pt; font-size:10pt"><span style="font-weight:bold"></span></p></td></tr><tr><td colspan="4" style="width:346.4pt; padding-right:4pt; padding-left:4pt; vertical-align:top; background-color:#dfdfdf"><p style="margin-top:6pt; margin-bottom:3pt; font-size:10pt"><span style="font-weight:bold">For your information</span></p></td></tr><tr><td colspan="4" style="width:414.2pt; padding-right:4pt; padding-left:4pt; vertical-align:top"><p style="margin-top:3pt; margin-bottom:3pt; text-align:justify; font-size:9pt"><span>It is an offence to make a false statement in connection with the operation of the </span><span style="font-style:italic">Radiocommunications Act 1992 </span><span>in Australia and the </span><span style="font-style:italic">Radiocommunications Act 1989 </span><span>in New Zealand.</span></p><p style="margin-top:3pt; margin-bottom:2pt; font-size:9pt"><span>Penalty:</span><span> </span><span></span><span></span><span>100 penalty units. (Australia)</span></p></td></tr></tbody></table>
Schedule 4 Supplier’s Declaration of Conformity
(subsection 3 (1))
Supplier’s Declaration of Conformity
(For compliance levels 1, 2 and 3 in Australia and Levels of Conformity 1, 2 and 3 in New Zealand)
As required by Notices under:
section 182 of the Australian Radiocommunications Act 1992;
section 134 of the New Zealand Radiocommunications Act 1989.
Instructions for Completion:
KEEP this document WITH YOUR COMPLIANCE RECORDS.DO NOT RETURN TO THE ACA or THE MED