154Matters to be included in log book

154 Matters to be included in log book

154 Matters to be included in log book

(1) The following must be entered in a log book in relation to control equipment required to be fitted to a petrol dispenser or a petrol storage tank—

(a) the type of control equipment installed,

(b) if the control equipment has a serial number—the serial number,

(c) the name and address of the following—

(i) the manufacturer of the control equipment,

(ii) the supplier of the control equipment,

(iii) the person or body that carried out the installation of the control equipment,

(d) for a modification carried out on the control equipment—a description of the modification, including the following—

(i) the type of control equipment replaced, removed or added,

(ii) the serial number of new control equipment, if any, and

(iii) the name and address of the person or body who carried out the modification work,

(e) a description of the routine maintenance carried out on the control equipment,

(f) details of rectification work carried out on the control equipment, including the name and address of the person or body that carried out the rectification work,

(g) details of the manual monitoring of control equipment undertaken,

(h) a description of the testing of the operation of the control equipment, whether carried out in compliance with this Regulation or otherwise, including the following—

(i) the type of test carried out,

(ii) the results of the test,

(iii) the name and address of the person or body who carried out the test,

(i) a description of incidents, if any, that indicated that the control equipment was not, or may not have been, operating in a proper and efficient way and the measures taken to investigate and respond to the incident.

(2) This section applies to a part of the control equipment in the same way that it applies to the control equipment.