Part 21 Manual of Standards Instrument 2016
Sch 26ATSO-C1003 – Helicopter external personnel lifting devices
Start here
Get a plain-English read of Sch 26
Turn the raw legal text into a practical explanation grounded in Part 21 Manual of Standards Instrument 2016.
Schedule 26 ATSO-C1003 – Helicopter external personnel lifting devices
(subsection 13.2 (1), table, item 6)
This Schedule applies to a helicopter external personnel lifting device manufactured by an article manufacturer that is 1 of the following kinds of helicopter external personnel lifting device:
(a) a winchman’s or rescue harness;
(b) a rescue or retrieval strop combination.
AS/NZS 1891.1:1995 Amdt 4 means AS/NZS 1891.1:1995, Industrial fall‑arrest systems and devices, Part 1: Safety belts and harnesses, incorporating amendments to Amendment No. 4, published on 5 August 1999.
dispatcher’s restraint strap has the meaning as defined in Schedule 24.
rescue or retrieval strop combination means an item of equipment that:
(a) is used in either a single or double lift; and
(b) is fitted around a person under the person’s arms, across the person’s back and securing in front of the person’s chest.
winchman’s or rescue harness means either:
(a) a full harness that:
(i) is worn by a person when suspended outside a helicopter from a winch hook; and
(ii) may be used in conjunction with a dispatcher’s restraint strap to prevent the wearer from inadvertently exiting the aircraft; or
(b) a rappel harness.
3 Minimum performance standards — device
(1) Subject to subclauses (3) to (6), if the helicopter external personnel lifting device is a winchman’s or rescue harness, it must meet the requirements mentioned in AS/NZS 1891.1:1995 Amdt 4 for a fall‑arrest harness.
(2) Subject to subclauses (3) to (6), if the helicopter external personnel lifting device is a rescue or retrieval strop combination, it must meet the requirements mentioned in AS/NZS 1891.1:1995 Amdt 4 for a retrieval strap.
(3) The helicopter external personnel lifting device does not need to meet the requirements mentioned in clause 4.2.3 of AS/NZS 1891.1:1995 Amdt 4 if the device meets 1 of the following requirements for demonstrating its resistance to degradation by light:
(a) a substantiated life limitation;
(b) the use of webbing previously qualified to a similar performance standard.
(4) The instructions mentioned in clause 5.1 of AS/NZS 1891.1:1995 Amdt 4 do not need to include the matters mentioned in paragraphs 5.1 (a) to (f) of AS/NZS 1891.1:1995 Amdt 4.
(5) The marking or labelling mentioned in clause 5.2 of AS/NZS 1891.1:1995 Amdt 4 does not need to include the information about the maximum allowable free fall mentioned in paragraph 5.2 (d) of AS/NZS 1891.1:1995 Amdt 4.