6Minimum performance standard — marking

6 Minimum performance standard — marking

(1) The equipment must be permanently and legibly marked with the following:

(a) either:

(i) the class of the equipment in accordance with RTCA/DO‑181 or ED‑73; or

(ii) if the equipment meets more than 1 class — the class with the more stringent requirements;

(b) if the equipment is of a level within the meaning of ED‑73 — either:

(i) the level of the equipment in accordance with ED‑73; or

(ii) if the equipment meets more than 1 level — the level with the more stringent requirements;

(c) the environmental categories over which the equipment has been designed to operate mentioned in Appendix A of RTCA/DO-160F;

(d) if an environmental test procedure is not applicable and the test is not conducted — an “X” in the space in which the category would otherwise be marked.

(2) Subject to subclause (3), each component of the equipment, including the antenna and receiver-transmitter, must be permanently and legibly marked with:

(a) the name of the manufacturer; and

(b) “ATSO-1C112”; and

(c) the environmental categories over which it is designed to operate.

(3) Subclause (2) does not apply to a component, other than the antenna and receiver-transmitter, to the extent the shape, size or nature of the component makes it impracticable to mark on the component the information required by subclause (2).