National Transport Commission (Road Transport Legislation - Australian Road Rules) Regulations 2006
218Using headlights on high‑beam
Start here
Get a plain-English read of 218
Turn the raw legal text into a practical explanation grounded in National Transport Commission (Road Transport Legislation - Australian Road Rules) Regulations 2006.
218 Using headlights on high‑beam
(1) The driver of a vehicle must not use the vehicle’s headlights on high‑beam, or allow the vehicle’s headlights to be used on high‑beam, if the driver is driving: (a) less than 200 metres behind a vehicle travelling in the same direction as the driver; or (b) less than 200 metres from an oncoming vehicle.
Offence provision.
Note: High‑beam and oncoming vehicle are defined in the dictionary.
(2) However, if the driver is overtaking a vehicle, the driver may briefly switch the headlights from low‑beam to high‑beam immediately before the driver begins to overtake the vehicle.
Note: Low‑beam and overtake are defined in the dictionary.
Note: Examples
Example 1
Using headlights on low‑beam when travelling less
than 200 metres behind another vehicle travelling in
the same direction
Image unavailable in extracted text
Example 2
Using headlights on low‑beam when travelling within
200 metres of an oncoming vehicle
Image unavailable in extracted text