National Greenhouse and Energy Reporting (Safeguard Mechanism) Rule 2015
86Updated emissions intensity for certain changes to NGER (Measurement) Determination
Start here
Get a plain-English read of 86
Turn the raw legal text into a practical explanation grounded in National Greenhouse and Energy Reporting (Safeguard Mechanism) Rule 2015.
86 Updated emissions intensity for certain changes to NGER (Measurement) Determination
(1) This section applies to a calculated‑emissions baseline determination or production‑adjusted baseline determination for a facility that: (a) is made using one or more estimated emissions intensities for one or more production variables; and (b) the estimated emissions‑intensities take into account emissions reported, or to be reported, under Division 3.3 of the NGER (Measurement) Determination as in force before 1 July 2021; and (c) the Regulator considers that amendments made by the National Greenhouse and Energy Reporting (2021 Update) Determination 2021 impact the estimated emissions intensity by more than 1%. (2) After consulting with the responsible emitter for the facility to which a determination covered by this section applies, the Regulator must amend the determination to take account of the National Greenhouse and Energy Reporting (2021 Update) Determination 2021 (with effect from no earlier than 1 July 2021). (3) For subsection (2), the Regulator must take into account the use of method 2 under subsection 2.27 if satisfied that method will be used on an ongoing basis to report emissions from the facility. (4) As soon as practicable after amending a determination, the Regulator must: (a) provide written notice of the decision to the responsible emitter for the facility of the determination; and (b) publish the details of the determination on its website.