47ATreated steel flat products

47A Treated steel flat products

(1) Tonnes of treated steel flat products that: (a) are produced as part of carrying on the treated steel flat products activity at the facility; and (b) are flat in profile, such as plate and coil; and (c) have not previously been included as a tonne of treated steel flat products under this section; and (d) have involved the pickling and cold‑rolling of hot‑rolled steel coil; and (e) have been treated with one or a combination of the following processes: (i) annealing; (ii) metal coating; (iii) painting; and (f) are of saleable quality. (2) The metric in subsection (1) is applicable to a facility that conducts the activity of transforming hot‑rolled steel coil, using a combination of physical or chemical processes, into treated steel flat products that: (a) are flat in profile, such as plate and coil; and (b) have involved the pickling and cold‑rolling of hot‑rolled steel coil; and (c) have been treated with one or a combination of the following processes: (i) annealing; (ii) metal coating; (iii) painting. (3) The activity in subsection (2) is the treated steel flat products activity. (4) The default emissions intensity is 0.144 t CO2‑e per tonne of treated steel flat products.