MOTOR VEHICLES (STANDARDS) REGULATIONS - AUSTRALIAN VEHICLE STANDARDS RULES
98Fitting brake lights
Start here
Get a plain-English read of 98
Turn the raw legal text into a practical explanation grounded in MOTOR VEHICLES (STANDARDS) REGULATIONS - AUSTRALIAN VEHICLE STANDARDS RULES.
98 Fitting brake lights (1) A brake light must be fitted to the rear of a vehicle built after 1934. (2) A pair of brake lights must be fitted to the rear of: (a) a motor vehicle built after 1959 that has 4 or more wheels; and (b) a motor trike built after 1959 that has 2 rear wheels; and (c) a trailer built after June 1973. (3) The centre of a brake light must be: (a) at least 350 millimetres above ground level; and (b) not over: (i) 1.5 metres above ground level; or (ii) if it is not practicable to fit the light lower – 2.1 metres (4) A vehicle may be fitted with 1 or more additional brake lights. (5) The centre of an additional brake light must be at least 350 millimetres above ground level. (6) If only 1 brake light is fitted to a vehicle, it must be fitted in the centre or to the right of the centre of the vehicle’s rear.
Motor Vehicles (Standards) Regulations 2003 – Australian Vehicle Standards Rules 48 (7) Subrule (6) applies to a motor bike with an attached sidecar as if Location of brake lights on a vehicle