MOTOR VEHICLES (STANDARDS) REGULATIONS - AUSTRALIAN VEHICLE STANDARDS RULES
91Front clearance lights
Start here
Get a plain-English read of 91
Turn the raw legal text into a practical explanation grounded in MOTOR VEHICLES (STANDARDS) REGULATIONS - AUSTRALIAN VEHICLE STANDARDS RULES.
91 Front clearance lights (1) Front clearance lights may only be fitted to a vehicle that is at least 1.8 metres wide. (2) A pair of front clearance lights must be fitted to a motor vehicle that is at least 2.2 metres wide, or a prime mover. (3) The centre of a front clearance light must be: (a) not over 400 millimetres from the nearer side of the vehicle; and (b) if the vehicle was built after June 1953: (i) at least 750 millimetres higher than the centre of any low-beam headlight fitted to the vehicle; or (ii) not lower than the top of the windscreen.
Motor Vehicles (Standards) Regulations 2003 – Australian Vehicle Standards Rules 44 (4) However, a front clearance light may be mounted on an external rear vision mirror or a mirror support if, when the mirror is correctly adjusted, no part of the lens of the clearance light is visible to a person in the normal driving position. (5) When on, a front clearance light must: (a) show a yellow or white light visible 200 metres from the front of the vehicle; and