85Daytime running lights

85 Daytime running lights (1) A pair of daytime running lights may be fitted to a motor vehicle. (2) A pair of daytime running lights fitted to a vehicle with 4 or more wheels must be fitted with the centre of each light: (a) at least 600 millimetres from the centre of the other light; and (b) not over 510 millimetres from the nearer side of the vehicle. (3) However, a pair of daytime running lights fitted to a motor vehicle under 1300 millimetres wide may be fitted with the centre of each light not under 400 millimetres from the centre of the other light. Location of daytime running lights on a vehicle

Motor Vehicles (Standards) Regulations 2003 – Australian Vehicle Standards Rules 41 (4) When on, a daytime running light must: (a) show a white or yellow light visible from the front of the (b) not use over 25 watts power. Note The third edition ADRs only allow white daytime running lights. (5) Daytime running lights must be wired so they are off when a headlight, except a headlight being used as a flashing signal, is on. (6) For subrule (3), the width of a vehicle is measured disregarding any