154LLabel requirements for electric-powered vehicles

154L Label requirements for electric-powered vehicles (1) For rules 154J(2)(a) and 154K(3)(a), a label must comply with the (a) the label is affixed to a plate made of metal that is at least 1 mm thick; (b) the label, and the plate to which the label is affixed, is an equilateral triangular shape: (i) each side of which is 30 mm in length; and (ii) each interior angle of which is 60°; (c) the label has a blue surface that complies with class 2 of (Part 1: Retroreflective sheeting)"; (d) the label is marked 'EV' in white capital letters that are at least 8 mm high and have the orientation shown in the example; (e) the label, and the plate to which the label is affixed, is affixed to the number plates so that the letters on the label are in an upright position;

Motor Vehicles (Standards) Regulations 2003 – Australian Vehicle Standards Rules 86 (f) the label, and the plate to which the label is affixed, does not wholly or partly obscure any characters on the number plates. Example for subrule (1) Note (2) For rules 154J(2)(b) and 154K(3)(b), a label must comply with the (a) the label, and any plate to which the label is affixed, is an equilateral triangular shape: (i) each side of which is 30 mm in length; and (ii) each interior angle of which is 60°; (b) the label has a blue surface that complies with class 2 of and devices for road traffic control purposes (Part 1: Retroreflective sheeting)"; (c) the label is marked 'EV' in white capital letters that are at least 8 mm high and have the orientation shown in the example; (d) the label, and any plate to which the label is affixed, is affixed to the vehicle or to a part attached to the vehicle within 100 mm of an edge of the number plate; (e) the label, and any plate to which the label is affixed, is affixed in a manner that shows the letters on the label in an upright position and on the same horizontal plane as the characters on the number plate;

Motor Vehicles (Standards) Regulations 2003 – Australian Vehicle Standards Rules 87 (f) the label is visible from the same angles from which the number plate is visible. Example for subrule (2) Note Note This Part requires certain heavy vehicles built after 1987, but before July 1991, to have a restricted top speed. However, emergency vehicles and certain 2-axle prime movers owned by farmers and used in primary production are exempt.