sch.2-secAdvertising structures—business identification signs

sch.2-sec Advertising structures—business identification signs

Advertising structures—business identification signs

(1) In Residential Zones—

(a) maximum area—0.75m2, and

(b) must only identify the approved use of the premises to which the sign is affixed and not promote products, and

(c) must not be illuminated or flashing, and

(d) are not on a heritage item or on land within the curtilage of a heritage item.

(2) In employment zones (for premises with an awning) applies to awning fascia signs and under awning signs, if—

(a) under awning signs meet the following requirements—

(i) maximum height—0.5m,

(ii) maximum length—2.5m,

(iii) minimum clearance—2.4m above the footpath level,

(iv) minimum distance from any other under awning sign—3m,

(v) minimum setback—0.5m from the face of the kerb, and

(b) the sign only identifies the approved use of the premises to which the sign is affixed and does not promote products, and

(c) there is a maximum of 2 signs per business, and

(d) the sign—

(i) does not extend above the awning line, and

(ii) is not illuminated or flashing, and

(e) the sign is not on a heritage item or on land within the curtilage of a heritage item.

(3) In employment zones (for premises without an awning) applies to projecting wall signs or flush wall signs, if—

(a) projecting wall signs meet the following requirements—

(i) maximum height—0.5m,

(ii) maximum length—2.5m,

(iii) minimum clearance—2.4m above the footpath level,

(iv) minimum distance from any other projecting wall sign—3m,