Section (e) the procedures to be followed in the - Manual of Standards Part 173—Standards Applicable to Instrument Flight Procedure Design - (e) the procedures to be followed in the application of the authorisation and the incorporation of those procedures in company operations manuals or other appropriate documents.

(e) the procedures to be followed in the(e) the procedures to be followed in the application of the authorisation and the incorporation of those procedures in company operations manuals or other appropriate documents.

Start here

Get a plain-English read of (e) the procedures to be followed in the

Turn the raw legal text into a practical explanation grounded in Manual of Standards Part 173—Standards Applicable to Instrument Flight Procedure Design.

Section 6.2: Design Authorisations

6.2.1 General

6.2.1.1 This section details the standards that must be applied to the issue of a procedure design authorisation in accordance with CASR Part 173 Subpart C.

6.2.1.2 Authorisations are required for persons engaged in:

(a) the review and/or amendment of terminal instrument flight procedures at aerodromes outside Australia in order to apply Australian standards to procedures promulgated by foreign States; and

(b) the design of a helicopter off-shore TIFP in accordance with Section 8.6 (Helicopter off-shore procedures — airborne radar).

6.2.2 Content

6.2.2.1 A Design Authorisation shall contain the following:

(a) the names of persons authorised; and

(b) details of the work that those persons are authorised under CASR Part 173 to perform; and

(c) the standards or design criteria to be used; and

(d) any limitation or conditions that apply to the authorisation; and

(e) the procedures to be followed in the application of the authorisation and the incorporation of those procedures in company operations manuals or other appropriate documents.