Manual of Standards Part 173—Standards Applicable to Instrument Flight Procedure Design
Section 6.2: Design Authorisations
6.2.1 General
6.2.1.1 This section details the standards that must be applied to the issue of a procedure design authorisation in accordance with CASR Part 173 Subpart C.
6.2.1.2 Authorisations are required for persons engaged in:
(a) the review and/or amendment of terminal instrument flight procedures at aerodromes outside Australia in order to apply Australian standards to procedures promulgated by foreign States; and
(b) the design of a helicopter off-shore TIFP in accordance with Section 8.6 (Helicopter off-shore procedures — airborne radar).
6.2.2 Content
6.2.2.1 A Design Authorisation shall contain the following:
(a) the names of persons authorised; and
(b) details of the work that those persons are authorised under CASR Part 173 to perform; and
(c) the standards or design criteria to be used; and
(d) any limitation or conditions that apply to the authorisation; and
(e) the procedures to be followed in the application of the authorisation and the incorporation of those procedures in company operations manuals or other appropriate documents.