Heavy Vehicle (Vehicle Standards) National Regulation (NSW)
54Rear clearance lights
Start here
Get a plain-English read of 54
Turn the raw legal text into a practical explanation grounded in Heavy Vehicle (Vehicle Standards) National Regulation (NSW).
54 Rear clearance lights
54 Rear clearance lights
(1) Rear clearance lights may only be fitted to a heavy vehicle that is at least 1.8m wide.
(2) A pair of rear clearance lights must be fitted to the rear of a heavy vehicle that is at least 2.2m wide.
(3) The centre of a rear clearance light fitted to a heavy vehicle must be—
(a) not more than 400mm from the nearer side of the vehicle; and
(b) if practicable, at least 600mm above ground level.
(4) When on, a rear clearance light fitted to a heavy vehicle must—
(a) show a red light visible 200m from the rear of the vehicle; and
(b) not use more than 7W.
(5) In this section—
rear clearance light means a light fitted to the rear of a vehicle that indicates the dimension limits of the vehicle when viewed from the rear.