Heavy Vehicle (Vehicle Standards) National Regulation (NSW)
46Daytime running lights
Start here
Get a plain-English read of 46
Turn the raw legal text into a practical explanation grounded in Heavy Vehicle (Vehicle Standards) National Regulation (NSW).
46 Daytime running lights
46 Daytime running lights
(1) A pair of daytime running lights may be fitted to a heavy motor vehicle.
(2) A pair of daytime running lights fitted to a heavy motor vehicle with 4 or more wheels must be fitted with the centre of each light—
(a) at least 600mm from the centre of the other light; and
(b) not more than 510mm from the nearer side of the vehicle.
(3) However, a pair of daytime running lights fitted to a heavy motor vehicle less than 1300mm wide may be fitted with the centre of each light not less than 400mm from the centre of the other light.
(4) When on, a daytime running light fitted to a heavy motor vehicle must—
(a) show a white or yellow light visible from the front of the vehicle; and
(b) not use more than 25W.
Note—
The third edition ADRs only allow white daytime running lights.
(5) Daytime running lights fitted to a heavy motor vehicle must be wired so they are off when a headlight, other than a headlight being used as a flashing signal, is on.
(6) In this section—
daytime running lights means lights fitted to the front of a vehicle for improving visibility in the daytime.