Div 3Fencing materials

Division 3—Fencing materials 2.9 Pre-used fencing materials (1) Notwithstanding clause 2.1, a person shall not construct a fence on a Residential Lot, a Commercial Lot or an Industrial Lot from pre-used materials without the approval of the local (2) Where the local government approves the use of pre-used materials in the construction of a fence under subclause (1), that approval shall be conditional on the applicant painting or treating the pre- used material as directed by the Building Surveyor. 2.10 Barbed wire fences and spiked or jagged materials (1) This clause does not apply to a fence constructed wholly or partly of razor wire. (2) An owner or occupier of a Residential Lot or a Commercial Lot shall not erect, affix or allow to remain on any fence on such a lot any barbed wire or other material with spiked or jagged projections, unless the prior written approval of the local government has been obtained. (3) An owner or occupier of an Industrial Lot shall not erect, affix or allow to remain on any fence bounding that lot any barbed wire or other materials with spiked or jagged projections unless the wire or other materials are carried on posts at an angle of 45 degrees, and unless the bottom row of wire or other materials is setback 150mm from the face of the fence and is not nearer than 2000mm from the ground level. (4) If the posts which carry the barbed wire or other materials referred to in subclause (3) are angled towards the outside of the lot bounded by the fence, the face of the fence must be set back from the lot boundary a sufficient distance to ensure that the angled posts, barbed wire or other materials do not encroach on adjoining land. (5) An owner or occupier of a lot shall not erect, affix or allow to remain as part of any fence or wall, whether internal or external, on that lot any broken glass. (6) An owner or occupier of a Rural Lot shall not erect, affix or allow to remain any barbed wire upon a fence on that lot where the fence is adjacent to a thoroughfare or other public place unless the barbed wire is fixed to the side of the fence posts furthest from the thoroughfare or other public place. 2.11 Electrified and razor wire fences (1) An owner or occupier of a lot shall not— (a) construct or use an electrified fence on that lot without obtaining the approval of the local government in the form prescribed in Schedule 5; or (b) construct a fence wholly or partly of razor wire on that lot without obtaining the approval of the local government in the form prescribed in Schedule 6. (2) The local government shall not approve an application for the purpose of subclause (1)(a)— (a) in respect of a lot which is or which abuts a Residential Lot; (b) unless the proposed fence will comply with “AS/NZS 3016:2002 Electrical installations— Electricity security fences”; and (c) unless provision is made so as to enable the fence to be rendered inoperable during the hours of business operations, if any, on the lot where it is erected. (3) The local government shall not approve an application for the purpose of subclause (1)(b)— (a) if the fence is within 3 000 millimetres of the boundary of the lot; or (b) where any razor wire used in the construction of the fence is less than 2 000 millimetres or more than 2 400 millimetres above the ground level. (4) An application for approval for the purpose of subclauses (1)(a) or (1)(b) shall be made by the owner of the lot on which the fence is or is to be erected, or by the occupier of the lot with the written consent of the owner. 2.12 Prohibited fencing materials A person shall not affix or use broken glass in the construction of any fence. 2.13 Certification of fencing designs Where required by the Building Surveyor, fencing designs are to be certified by a practicing structural engineer as being suitable for wind loadings found in Region D Category 2 areas in accordance with the current edition of AS/NZS 1170.0:2002 Structural design actions—General principles.