Gas and Electricity (Consumer Safety) Regulation 2018
51Identification labels
Start here
Get a plain-English read of 51
Turn the raw legal text into a practical explanation grounded in Gas and Electricity (Consumer Safety) Regulation 2018.
51 Identification labels
51 Identification labels
(1) The responsible contractor for fitting an autogas installation to any vehicle, vessel or machine must ensure that an identification label is attached to the outside of the vehicle, vessel or machine in a conspicuous position.
Maximum penalty—100 penalty units (in the case of a corporation) or 25 penalty units (in the case of an individual).
(2) In the case of a vehicle that is registered within the meaning of the Road Transport Act 2013, the identification label must be attached to both the front and back number plates of the vehicle.
(3) An identification label must comply with—
(a) AS/NZS 1425, in the case of work on an autogas (LP Gas) installation, or
(b) AS/NZS 2739, in the case of work on an autogas (CN Gas) installation.
cll 47–51: Am 2020 (641), Sch 1[6].