sch.8-sec.22Way fish may be taken

sch.8-sec.22 Way fish may be taken

Permitted fish may be taken only by using an otter trawl net or seine net that complies with this section. The net must not be longer than 88m and must have a mesh size of at least 38mm. For subsection (2) , the length of the net must be worked out from the combined length of the following ropes when taut— the head and bottom ropes; the rope fixing the net’s opening size; the ropes to which the net’s mesh is attached; the part of another rope, other than a lazy line or log rope, to which a wing net is attached. For an otter trawl net— each of its sweeps must not be longer than 128m; and the net must not be used from a boat longer than 20m; and the net must be used with a TED that complies with schedule 2 , part 2 , division 11 . For subsection (4) (a) , an otter trawl net’s sweeps includes a chain, rope, shackle, wire or other fitting used to attach otter boards or sleds to the net. However, if 2 or more fittings mentioned in subsection (5) are joined to make a single fitting, the single fitting is 1 sweep. For a seine net— each of the 2 haul ropes attached to the net must not be longer than 2,500m; and the end of the haul rope that is first deployed when the net is deployed must be marked with a floating buoy that is clearly visible on the surface of the water; and the net must not be used from a boat longer than 25m. A seine net described in subsection (7) is commonly known as a Danish seine net. sch 8 s 22 amd 2020 SL No. 236 s 198 sch 3 (sch.8-sec.22-ssec.1) Permitted fish may be taken only by using an otter trawl net or seine net that complies with this section. (sch.8-sec.22-ssec.2) The net must not be longer than 88m and must have a mesh size of at least 38mm. (sch.8-sec.22-ssec.3) For subsection (2) , the length of the net must be worked out from the combined length of the following ropes when taut— the head and bottom ropes; the rope fixing the net’s opening size; the ropes to which the net’s mesh is attached; the part of another rope, other than a lazy line or log rope, to which a wing net is attached. (sch.8-sec.22-ssec.4) For an otter trawl net— each of its sweeps must not be longer than 128m; and the net must not be used from a boat longer than 20m; and the net must be used with a TED that complies with schedule 2 , part 2 , division 11 . (sch.8-sec.22-ssec.5) For subsection (4) (a) , an otter trawl net’s sweeps includes a chain, rope, shackle, wire or other fitting used to attach otter boards or sleds to the net. (sch.8-sec.22-ssec.6) However, if 2 or more fittings mentioned in subsection (5) are joined to make a single fitting, the single fitting is 1 sweep. (sch.8-sec.22-ssec.7) For a seine net— each of the 2 haul ropes attached to the net must not be longer than 2,500m; and the end of the haul rope that is first deployed when the net is deployed must be marked with a floating buoy that is clearly visible on the surface of the water; and the net must not be used from a boat longer than 25m. A seine net described in subsection (7) is commonly known as a Danish seine net.