Commonwealth Coat of Arms of Australia

Financial Sector (Collection of Data) (reporting standard) determination No. 11 of 2025

Reporting Standard SRS 606.0 RSE Profile

Financial Sector (Collection of Data) Act 2001

I, Andrew Robertson, delegate of APRA, under paragraph 13(1)(a) of the Financial Sector (Collection of Data) Act 2001 (the Act) and subsection 33(3) of the Acts Interpretation Act 1901:

1. revoke Financial Sector (Collection of Data) (reporting standard) determination No. 44 of 2023, including Reporting Standard SRS 606.0 RSE Profile made under that determination; and

2. determine Reporting Standard SRS 606.0 RSE Profile, in the form set out in the Schedule, which applies to financial sector entities to the extent provided in paragraph 3 of that reporting standard.

Under section 15 of the Act, I declare that Reporting Standard SRS 606.0 RSE Profile shall begin to apply to those financial sector entities, and that the revoked reporting standard shall cease to apply, at the start of the day after the day this instrument is registered on the Federal Register of Legislation.

This instrument commences at the start of the day after the day it is registered on the Federal Register of Legislation.

Dated: 30 April 2025

Andrew Robertson

Chief Data Officer

Technology and Data Division

Interpretation

In this instrument:

APRA means the Australian Prudential Regulation Authority.

Federal Register of Legislation means the register established and maintained under section 15A of the Legislation Act 2003.

financial sector entity means financial sector entities of a kind referred to in paragraphs 5(2)(a) to (d) of the Act.

Schedule

Reporting Standard SRS 606.0 RSE Profile comprises the document commencing on the following page.

Commonwealth Coat of Arms of Australia

Reporting Standard SRS 606.0

RSE Profile

Objective of this reporting standard

This Reporting Standard sets out the requirements for the provision of information to APRA relating to the profile of a registrable superannuation entity (RSE) and defined benefit RSE.

It includes Reporting Form SRF 606.0 RSE Profile (SRF 606.0) and associated specific instructions.

Authority

1. This Reporting Standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001.

Purpose

1. Information collected under this Reporting Standard is used by APRA for the purposes of prudential supervision and publication. It may also be used by the Australian Securities and Investments Commission.

Application

1. This Reporting Standard applies to each registrable superannuation entity (RSE) licensee (RSE licensee) in respect of each RSE and defined benefit RSE within its business operations[1]

Commencement

1. This Reporting Standard commences at the start of the day after the day that it is registered on the Federal Register of Legislation.

Reporting periods

1. The RSE Licensee must provide the information required by this Reporting Standard for the reporting periods, by the due dates, set out in the table below.

Notices

1. If, having regard to the particular circumstances of an RSE or defined benefit RSE, APRA considers it necessary or desirable to obtain information more or less frequently than as provided by paragraph 5, APRA may, by notice in writing, change the reporting periods for the particular RSE or defined benefit RSE.
2. Where APRA has changed the reporting periods under paragraph 6, the RSE licensee must provide the relevant information within the time specified by the notice in writing.
3. APRA may grant, in writing, an RSE licensee an extension of a due date with respect to one or more RSEs or defined benefit RSEs within its business operations, in which case the new due date for the provision of the information will be the due date specified on the notice of extension.

Note: For the avoidance of doubt, APRA’s expectation is that if the due date for a particular reporting period falls on a day other than a usual business day, an RSE licensee will submit the information required no later than the due date.

Form and method of submission

1. The information required by this Reporting Standard must be given to APRA in electronic format using an electronic method available on APRA’s website or by a method notified by APRA prior to submission.

Quality control

1. The information provided by an RSE licensee under this Reporting Standard must be the product of systems, procedures and internal controls that have been reviewed and tested by the RSE auditor of the RSE or defined benefit RSE to which the information relates[2]. This will require the RSE auditor to review and test the RSE licensee’s systems, procedures and internal controls designed to enable the RSE licensee to report reliable information to APRA. This review and testing must be done on:

   1. an annual basis or more frequently if necessary to enable the RSE auditor to form an opinion on the reliability and accuracy of information; and

   2. at least a limited assurance engagement consistent with professional standards and guidance notes issued by the Auditing and Assurance Standards Board as may be amended from time to time, to the extent that they are not inconsistent with the requirements of Prudential Standard SPS 310 Audit and Related Matters (SPS 310).

2. All information provided by an RSE licensee under this Reporting Standard must be subject to systems, processes and controls developed by the RSE licensee for the internal review and authorisation of that information. It is the responsibility of the Board and senior management of the RSE licensee to ensure that an appropriate set of policies, procedures and controls for the authorisation of information submitted to APRA is in place.

Authorisation

1. When an officer or agent of an RSE licensee provides the information required by this Reporting Standard using an electronic format, the officer or agent must digitally sign the relevant information using a digital certificate acceptable to APRA.
2. If the information required by this Reporting Standard is provided by an agent who submits the information on the RSE licensee’s behalf, the RSE licensee must:
   1. obtain from the agent a copy of the completed form with the information provided to APRA; and
   2. retain the completed copy.
3. An officer or agent of an RSE licensee who submits the information under this Reporting Standard for, or on behalf of, the RSE licensee must be authorised by either:
   1. the Chief Executive Officer of the RSE licensee; or
   2. the Chief Financial Officer of the RSE licensee.

Minor alterations to forms and instructions

1. APRA may make minor variations to:

   1. a form that is part of this Reporting Standard, and the instructions to such a form, to correct technical, programming or logical errors, inconsistencies or anomalies; or

   2. the instructions to a form, to clarify their application to the form,

without changing any substantive requirement in the form or instructions.

1. If APRA makes such a variation, it must notify each RSE licensee that is required to report under this Reporting Standard.

Transition

1. An RSE licensee to which this Reporting Standard applies must report under the old reporting standard in respect of a transitional reporting period. For these purposes:

   old reporting standard means the reporting standard revoked in the determination making this Reporting Standard; and

   transitional reporting period means a reporting period under the old reporting standard:

   that ended on or before 30 September 2025; and

   in relation to which the RSE licensee was required, under the old reporting standard, to report by a date on or after the date of revocation of the old reporting standard.

   Note: For the avoidance of doubt, if an RSE licensee was required to report under an old reporting standard, and the reporting documents were due before the date of revocation of the old reporting standard, the RSE licensee is still required to provide any overdue reporting documents in accordance with the old reporting standard.

Interpretation

1. In this Reporting Standard:

APRA means the Australian Prudential Regulation Authority established under the Australian Prudential Regulation Authority Act 1998.

Chief Executive Officer means the chief executive officer of the RSE licensee, by whatever name called, and whether or not he or she is a member of the Board of the RSE licensee[3].

Chief Financial Officer means the chief financial officer of the RSE licensee, by whatever name called.

defined benefit RSE has the meaning of defined benefit fund in subsection 10(1) of the SIS Act .

due date means the relevant due date under paragraph 5, 7 or, if applicable, paragraph 8 of this Reporting Standard.

reporting period means a period mentioned in paragraph 5 or, if applicable, paragraph 6 of this Reporting Standard.

RSE means a registrable superannuation entity as defined in subsection 10(1) of the SIS Act that is not a defined benefit RSE, pooled superannuation trust, small APRA fund or single member approved deposit fund[4].

RSE auditor means an auditor appointed by the RSE licensee to perform functions under this Reporting Standard.

RSE licensee has the meaning given in subsection 10(1) of the SIS Act.

SIS Act means Superannuation Industry (Supervision) Act 1993.

1. In this Reporting Standard, unless an instrument is not disallowable or a contrary intention appears, a reference to an Act, Regulation, Prudential Standard, Reporting Standard, Australian Accounting Standard or Auditing Standard is a reference to the instrument as in force or existing from time to time.
2. Where this Reporting Standard provides for APRA to exercise a power or discretion, this power or discretion is to be exercised in writing.

RSE Profile

Objective of this reporting standard

This Reporting Standard sets out the requirements for the provision of information to APRA relating to the profile of a registrable superannuation entity (RSE) and defined benefit RSE.

It includes Reporting Form SRF 606.0 RSE Profile (SRF 606.0) and associated specific instructions.

Authority

1. This Reporting Standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001.

Purpose

1. Information collected under this Reporting Standard is used by APRA for the purposes of prudential supervision and publication. It may also be used by the Australian Securities and Investments Commission.

Application

1. This Reporting Standard applies to each registrable superannuation entity (RSE) licensee (RSE licensee) in respect of each RSE and defined benefit RSE within its business operations[1]

Commencement

1. This Reporting Standard commences at the start of the day after the day that it is registered on the Federal Register of Legislation.

Reporting periods

1. The RSE Licensee must provide the information required by this Reporting Standard for the reporting periods, by the due dates, set out in the table below.

Notices

1. If, having regard to the particular circumstances of an RSE or defined benefit RSE, APRA considers it necessary or desirable to obtain information more or less frequently than as provided by paragraph 5, APRA may, by notice in writing, change the reporting periods for the particular RSE or defined benefit RSE.
2. Where APRA has changed the reporting periods under paragraph 6, the RSE licensee must provide the relevant information within the time specified by the notice in writing.
3. APRA may grant, in writing, an RSE licensee an extension of a due date with respect to one or more RSEs or defined benefit RSEs within its business operations, in which case the new due date for the provision of the information will be the due date specified on the notice of extension.

Note: For the avoidance of doubt, APRA’s expectation is that if the due date for a particular reporting period falls on a day other than a usual business day, an RSE licensee will submit the information required no later than the due date.

Form and method of submission

1. The information required by this Reporting Standard must be given to APRA in electronic format using an electronic method available on APRA’s website or by a method notified by APRA prior to submission.

Quality control

1. The information provided by an RSE licensee under this Reporting Standard must be the product of systems, procedures and internal controls that have been reviewed and tested by the RSE auditor of the RSE or defined benefit RSE to which the information relates[2]. This will require the RSE auditor to review and test the RSE licensee’s systems, procedures and internal controls designed to enable the RSE licensee to report reliable information to APRA. This review and testing must be done on:

   1. an annual basis or more frequently if necessary to enable the RSE auditor to form an opinion on the reliability and accuracy of information; and

   2. at least a limited assurance engagement consistent with professional standards and guidance notes issued by the Auditing and Assurance Standards Board as may be amended from time to time, to the extent that they are not inconsistent with the requirements of Prudential Standard SPS 310 Audit and Related Matters (SPS 310).

2. All information provided by an RSE licensee under this Reporting Standard must be subject to systems, processes and controls developed by the RSE licensee for the internal review and authorisation of that information. It is the responsibility of the Board and senior management of the RSE licensee to ensure that an appropriate set of policies, procedures and controls for the authorisation of information submitted to APRA is in place.

Authorisation

1. When an officer or agent of an RSE licensee provides the information required by this Reporting Standard using an electronic format, the officer or agent must digitally sign the relevant information using a digital certificate acceptable to APRA.
2. If the information required by this Reporting Standard is provided by an agent who submits the information on the RSE licensee’s behalf, the RSE licensee must:
   1. obtain from the agent a copy of the completed form with the information provided to APRA; and
   2. retain the completed copy.
3. An officer or agent of an RSE licensee who submits the information under this Reporting Standard for, or on behalf of, the RSE licensee must be authorised by either:
   1. the Chief Executive Officer of the RSE licensee; or
   2. the Chief Financial Officer of the RSE licensee.

Minor alterations to forms and instructions

1. APRA may make minor variations to:

   1. a form that is part of this Reporting Standard, and the instructions to such a form, to correct technical, programming or logical errors, inconsistencies or anomalies; or

   2. the instructions to a form, to clarify their application to the form,

without changing any substantive requirement in the form or instructions.

1. If APRA makes such a variation, it must notify each RSE licensee that is required to report under this Reporting Standard.

Transition

1. An RSE licensee to which this Reporting Standard applies must report under the old reporting standard in respect of a transitional reporting period. For these purposes:

   old reporting standard means the reporting standard revoked in the determination making this Reporting Standard; and

   transitional reporting period means a reporting period under the old reporting standard:

   that ended on or before 30 September 2025; and

   in relation to which the RSE licensee was required, under the old reporting standard, to report by a date on or after the date of revocation of the old reporting standard.

   Note: For the avoidance of doubt, if an RSE licensee was required to report under an old reporting standard, and the reporting documents were due before the date of revocation of the old reporting standard, the RSE licensee is still required to provide any overdue reporting documents in accordance with the old reporting standard.

Interpretation

1. In this Reporting Standard:

APRA means the Australian Prudential Regulation Authority established under the Australian Prudential Regulation Authority Act 1998.

Chief Executive Officer means the chief executive officer of the RSE licensee, by whatever name called, and whether or not he or she is a member of the Board of the RSE licensee[3].

Chief Financial Officer means the chief financial officer of the RSE licensee, by whatever name called.

defined benefit RSE has the meaning of defined benefit fund in subsection 10(1) of the SIS Act .

due date means the relevant due date under paragraph 5, 7 or, if applicable, paragraph 8 of this Reporting Standard.

reporting period means a period mentioned in paragraph 5 or, if applicable, paragraph 6 of this Reporting Standard.

RSE means a registrable superannuation entity as defined in subsection 10(1) of the SIS Act that is not a defined benefit RSE, pooled superannuation trust, small APRA fund or single member approved deposit fund[4].

RSE auditor means an auditor appointed by the RSE licensee to perform functions under this Reporting Standard.

RSE licensee has the meaning given in subsection 10(1) of the SIS Act.

SIS Act means Superannuation Industry (Supervision) Act 1993.

1. In this Reporting Standard, unless an instrument is not disallowable or a contrary intention appears, a reference to an Act, Regulation, Prudential Standard, Reporting Standard, Australian Accounting Standard or Auditing Standard is a reference to the instrument as in force or existing from time to time.
2. Where this Reporting Standard provides for APRA to exercise a power or discretion, this power or discretion is to be exercised in writing.

Objective of this reporting standard

This Reporting Standard sets out the requirements for the provision of information to APRA relating to the profile of a registrable superannuation entity (RSE) and defined benefit RSE.

It includes Reporting Form SRF 606.0 RSE Profile (SRF 606.0) and associated specific instructions.

Authority

1. This Reporting Standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001.

Purpose

1. Information collected under this Reporting Standard is used by APRA for the purposes of prudential supervision and publication. It may also be used by the Australian Securities and Investments Commission.

Application

1. This Reporting Standard applies to each registrable superannuation entity (RSE) licensee (RSE licensee) in respect of each RSE and defined benefit RSE within its business operations[1]

Commencement

1. This Reporting Standard commences at the start of the day after the day that it is registered on the Federal Register of Legislation.

Reporting periods

1. The RSE Licensee must provide the information required by this Reporting Standard for the reporting periods, by the due dates, set out in the table below.

Notices

1. If, having regard to the particular circumstances of an RSE or defined benefit RSE, APRA considers it necessary or desirable to obtain information more or less frequently than as provided by paragraph 5, APRA may, by notice in writing, change the reporting periods for the particular RSE or defined benefit RSE.
2. Where APRA has changed the reporting periods under paragraph 6, the RSE licensee must provide the relevant information within the time specified by the notice in writing.
3. APRA may grant, in writing, an RSE licensee an extension of a due date with respect to one or more RSEs or defined benefit RSEs within its business operations, in which case the new due date for the provision of the information will be the due date specified on the notice of extension.

Note: For the avoidance of doubt, APRA’s expectation is that if the due date for a particular reporting period falls on a day other than a usual business day, an RSE licensee will submit the information required no later than the due date.

Form and method of submission

1. The information required by this Reporting Standard must be given to APRA in electronic format using an electronic method available on APRA’s website or by a method notified by APRA prior to submission.

Quality control

1. The information provided by an RSE licensee under this Reporting Standard must be the product of systems, procedures and internal controls that have been reviewed and tested by the RSE auditor of the RSE or defined benefit RSE to which the information relates[2]. This will require the RSE auditor to review and test the RSE licensee’s systems, procedures and internal controls designed to enable the RSE licensee to report reliable information to APRA. This review and testing must be done on:

   1. an annual basis or more frequently if necessary to enable the RSE auditor to form an opinion on the reliability and accuracy of information; and

   2. at least a limited assurance engagement consistent with professional standards and guidance notes issued by the Auditing and Assurance Standards Board as may be amended from time to time, to the extent that they are not inconsistent with the requirements of Prudential Standard SPS 310 Audit and Related Matters (SPS 310).

2. All information provided by an RSE licensee under this Reporting Standard must be subject to systems, processes and controls developed by the RSE licensee for the internal review and authorisation of that information. It is the responsibility of the Board and senior management of the RSE licensee to ensure that an appropriate set of policies, procedures and controls for the authorisation of information submitted to APRA is in place.

Authorisation

1. When an officer or agent of an RSE licensee provides the information required by this Reporting Standard using an electronic format, the officer or agent must digitally sign the relevant information using a digital certificate acceptable to APRA.
2. If the information required by this Reporting Standard is provided by an agent who submits the information on the RSE licensee’s behalf, the RSE licensee must:
   1. obtain from the agent a copy of the completed form with the information provided to APRA; and
   2. retain the completed copy.
3. An officer or agent of an RSE licensee who submits the information under this Reporting Standard for, or on behalf of, the RSE licensee must be authorised by either:
   1. the Chief Executive Officer of the RSE licensee; or
   2. the Chief Financial Officer of the RSE licensee.

Minor alterations to forms and instructions

1. APRA may make minor variations to:

   1. a form that is part of this Reporting Standard, and the instructions to such a form, to correct technical, programming or logical errors, inconsistencies or anomalies; or

   2. the instructions to a form, to clarify their application to the form,

without changing any substantive requirement in the form or instructions.

1. If APRA makes such a variation, it must notify each RSE licensee that is required to report under this Reporting Standard.

Transition

1. An RSE licensee to which this Reporting Standard applies must report under the old reporting standard in respect of a transitional reporting period. For these purposes:

   old reporting standard means the reporting standard revoked in the determination making this Reporting Standard; and

   transitional reporting period means a reporting period under the old reporting standard:

   that ended on or before 30 September 2025; and

   in relation to which the RSE licensee was required, under the old reporting standard, to report by a date on or after the date of revocation of the old reporting standard.

   Note: For the avoidance of doubt, if an RSE licensee was required to report under an old reporting standard, and the reporting documents were due before the date of revocation of the old reporting standard, the RSE licensee is still required to provide any overdue reporting documents in accordance with the old reporting standard.

Interpretation

1. In this Reporting Standard:

APRA means the Australian Prudential Regulation Authority established under the Australian Prudential Regulation Authority Act 1998.

Chief Executive Officer means the chief executive officer of the RSE licensee, by whatever name called, and whether or not he or she is a member of the Board of the RSE licensee[3].

Chief Financial Officer means the chief financial officer of the RSE licensee, by whatever name called.

defined benefit RSE has the meaning of defined benefit fund in subsection 10(1) of the SIS Act .

due date means the relevant due date under paragraph 5, 7 or, if applicable, paragraph 8 of this Reporting Standard.

reporting period means a period mentioned in paragraph 5 or, if applicable, paragraph 6 of this Reporting Standard.

RSE means a registrable superannuation entity as defined in subsection 10(1) of the SIS Act that is not a defined benefit RSE, pooled superannuation trust, small APRA fund or single member approved deposit fund[4].

RSE auditor means an auditor appointed by the RSE licensee to perform functions under this Reporting Standard.

RSE licensee has the meaning given in subsection 10(1) of the SIS Act.

SIS Act means Superannuation Industry (Supervision) Act 1993.

1. In this Reporting Standard, unless an instrument is not disallowable or a contrary intention appears, a reference to an Act, Regulation, Prudential Standard, Reporting Standard, Australian Accounting Standard or Auditing Standard is a reference to the instrument as in force or existing from time to time.
2. Where this Reporting Standard provides for APRA to exercise a power or discretion, this power or discretion is to be exercised in writing.

Reporting Form SRF 606.0

RSE Profile

Instruction Guide

This instruction guide is designed to assist in the completion of Reporting Form SRF 606.0 RSE Profile (SRF 606.0). This form collects information on the profile of each RSE and defined benefit RSE business operations.

General directions and notes

Reporting level

SRF 606.0 must be completed for each RSE and defined benefit RSE.

Reporting tables

Tables described in this reporting form list each of the data fields required to be reported. The data fields are listed sequentially in the column order that they will appear in the reported data set. Constraints on the data that can be reported for each field have also been provided.

The Unique identifier column indicates which field or fields form the primary key of the table. Where a field has ‘Y’ in the Unique identifier column, this denotes that this field forms part of the primary key for the table. A blank cell in the Unique identifier column means that the field does not form part of the primary key for the table. Any specific combination of values in the fields that form the primary key of a table must not appear on more than one row in that table when reported.

Reporting basis and units of measurement

Member assets are to be reported as whole dollars, member accounts are to be reported as whole numbers.

Items on SRF 606.0 must be reported as at the end of the reporting period.

Definitions

Terms highlighted in bold italics indicate that the definition is provided in Reporting Standard SRS 101.0 Definitions for Superannuation Data Collections (SRS 101.0).

Specific instructions

Table 1: Member accounts (RSE)

Report Table 1 as at the end of the reporting period.

Table 2: Member accounts (products)

Report Table 2 as at the end of the reporting period. Report the number of member accounts for each unique superannuation product identifier.

Table 3: Member accounts (investment menu)

Report Table 3 as at the end of the reporting period. Report the number of member accounts for each combination of superannuation product identifier and investment menu identifier.

Table 4: Member accounts (investment options)

Report a row in Table 4 for each combination of superannuation product identifier, investment menu identifier, and investment option identifier that is offered to members, even if there are 0 member accounts or $0 of member assets in that combination.

Note this figure should only include the assets available to members invested in each investment option listed in Table 4.

In particular, the following should not be reported as part of member assets:

reserves; and
assets arising from the re-investment of one investment option into another.

e.g. If the balanced option re-invests into the cash option, these assets should be reported for the balanced option, but not for the cash option.

Instruction Guide

This instruction guide is designed to assist in the completion of Reporting Form SRF 606.0 RSE Profile (SRF 606.0). This form collects information on the profile of each RSE and defined benefit RSE business operations.

Reporting Form SRF 606.0

RSE Profile

Instruction Guide

This instruction guide is designed to assist in the completion of Reporting Form SRF 606.0 RSE Profile (SRF 606.0). This form collects information on the profile of each RSE and defined benefit RSE business operations.

General directions and notes

Reporting level

SRF 606.0 must be completed for each RSE and defined benefit RSE.

Reporting tables

Tables described in this reporting form list each of the data fields required to be reported. The data fields are listed sequentially in the column order that they will appear in the reported data set. Constraints on the data that can be reported for each field have also been provided.

The Unique identifier column indicates which field or fields form the primary key of the table. Where a field has ‘Y’ in the Unique identifier column, this denotes that this field forms part of the primary key for the table. A blank cell in the Unique identifier column means that the field does not form part of the primary key for the table. Any specific combination of values in the fields that form the primary key of a table must not appear on more than one row in that table when reported.

Reporting basis and units of measurement

Member assets are to be reported as whole dollars, member accounts are to be reported as whole numbers.

Items on SRF 606.0 must be reported as at the end of the reporting period.

Definitions

Terms highlighted in bold italics indicate that the definition is provided in Reporting Standard SRS 101.0 Definitions for Superannuation Data Collections (SRS 101.0).

Specific instructions

Table 1: Member accounts (RSE)

Report Table 1 as at the end of the reporting period.

Table 2: Member accounts (products)

Report Table 2 as at the end of the reporting period. Report the number of member accounts for each unique superannuation product identifier.

Table 3: Member accounts (investment menu)

Report Table 3 as at the end of the reporting period. Report the number of member accounts for each combination of superannuation product identifier and investment menu identifier.

Table 4: Member accounts (investment options)

Report a row in Table 4 for each combination of superannuation product identifier, investment menu identifier, and investment option identifier that is offered to members, even if there are 0 member accounts or $0 of member assets in that combination.

Note this figure should only include the assets available to members invested in each investment option listed in Table 4.

In particular, the following should not be reported as part of member assets:

reserves; and
assets arising from the re-investment of one investment option into another.

e.g. If the balanced option re-invests into the cash option, these assets should be reported for the balanced option, but not for the cash option.

Reporting level

SRF 606.0 must be completed for each RSE and defined benefit RSE.

Reporting tables

Tables described in this reporting form list each of the data fields required to be reported. The data fields are listed sequentially in the column order that they will appear in the reported data set. Constraints on the data that can be reported for each field have also been provided.

The Unique identifier column indicates which field or fields form the primary key of the table. Where a field has ‘Y’ in the Unique identifier column, this denotes that this field forms part of the primary key for the table. A blank cell in the Unique identifier column means that the field does not form part of the primary key for the table. Any specific combination of values in the fields that form the primary key of a table must not appear on more than one row in that table when reported.

Reporting basis and units of measurement

Member assets are to be reported as whole dollars, member accounts are to be reported as whole numbers.

Items on SRF 606.0 must be reported as at the end of the reporting period.

Definitions

Terms highlighted in bold italics indicate that the definition is provided in Reporting Standard SRS 101.0 Definitions for Superannuation Data Collections (SRS 101.0).

Specific instructions

Table 1: Member accounts (RSE)

Report Table 1 as at the end of the reporting period.

Table 2: Member accounts (products)

Report Table 2 as at the end of the reporting period. Report the number of member accounts for each unique superannuation product identifier.

Table 3: Member accounts (investment menu)

Report Table 3 as at the end of the reporting period. Report the number of member accounts for each combination of superannuation product identifier and investment menu identifier.

Table 4: Member accounts (investment options)

Report a row in Table 4 for each combination of superannuation product identifier, investment menu identifier, and investment option identifier that is offered to members, even if there are 0 member accounts or $0 of member assets in that combination.

Note this figure should only include the assets available to members invested in each investment option listed in Table 4.

In particular, the following should not be reported as part of member assets:

reserves; and
assets arising from the re-investment of one investment option into another.

e.g. If the balanced option re-invests into the cash option, these assets should be reported for the balanced option, but not for the cash option.

Reporting Form SRF 606.1

RSE Profile fees and costs arrangements

Instruction Guide

This instruction guide is designed to assist in the completion of Reporting Form SRF 606.1 RSE Profile fees and costs arrangements (SRF 606.1). This form collects information on the fees and costs arrangements of each RSE and defined benefit RSE business operations.

General directions and notes

Reporting level

SRF 606.1 must be completed for each RSE and defined benefit RSE.

Reporting tables

Tables described in this reporting form list each of the data fields required to be reported. The data fields are listed sequentially in the column order that they will appear in the reported data set. Constraints on the data that can be reported for each field have also been provided.

The Unique identifier column indicates which field or fields form the primary key of the table. Where a field has ‘Y’ in the Unique identifier column, this denotes that this field forms part of the primary key for the table. A blank cell in the Unique identifier column means that the field does not form part of the primary key for the table. Any specific combination of values in the fields that form the primary key of a table must not appear on more than one row in that table when reported.

Reporting basis and units of measurement

Member assets are to be reported as whole dollars, member accounts are to be reported as whole numbers.

Items on SRF 606.1 must be reported as at the end of the reporting period.

Definitions

Terms highlighted in bold italics indicate that the definition is provided in Reporting Standard SRS 101.0 Definitions for Superannuation Data Collections (SRS 101.0).

Specific instructions

Table 1: Open fee and costs arrangements

Report Table 1 as at the end of the reporting period.

Table 2: Member accounts (fee and cost arrangements)

Report Table 2 as at the end of the reporting period. Report the number of member accounts and value of member assets at the end of the reporting period for each unique fees and costs arrangement identifier for investment pathways which had member accounts and/or member assets at any time during the reporting period. For Table 2, exclude investment options with the following investment option category types:

Direct Cash Account;
Direct Term Deposit;
Direct Fixed Income Instrument;
Direct Shares;
Direct Hybrid Security; and
Annuity.

Reporting Form SRF 606.1

RSE Profile fees and costs arrangements

Instruction Guide

This instruction guide is designed to assist in the completion of Reporting Form SRF 606.1 RSE Profile fees and costs arrangements (SRF 606.1). This form collects information on the fees and costs arrangements of each RSE and defined benefit RSE business operations.

General directions and notes

Reporting level

SRF 606.1 must be completed for each RSE and defined benefit RSE.

Reporting tables

Tables described in this reporting form list each of the data fields required to be reported. The data fields are listed sequentially in the column order that they will appear in the reported data set. Constraints on the data that can be reported for each field have also been provided.

The Unique identifier column indicates which field or fields form the primary key of the table. Where a field has ‘Y’ in the Unique identifier column, this denotes that this field forms part of the primary key for the table. A blank cell in the Unique identifier column means that the field does not form part of the primary key for the table. Any specific combination of values in the fields that form the primary key of a table must not appear on more than one row in that table when reported.

Reporting basis and units of measurement

Member assets are to be reported as whole dollars, member accounts are to be reported as whole numbers.

Items on SRF 606.1 must be reported as at the end of the reporting period.

Definitions

Terms highlighted in bold italics indicate that the definition is provided in Reporting Standard SRS 101.0 Definitions for Superannuation Data Collections (SRS 101.0).

Specific instructions

Table 1: Open fee and costs arrangements

Report Table 1 as at the end of the reporting period.

Table 2: Member accounts (fee and cost arrangements)

Report Table 2 as at the end of the reporting period. Report the number of member accounts and value of member assets at the end of the reporting period for each unique fees and costs arrangement identifier for investment pathways which had member accounts and/or member assets at any time during the reporting period. For Table 2, exclude investment options with the following investment option category types:

Direct Cash Account;
Direct Term Deposit;
Direct Fixed Income Instrument;
Direct Shares;
Direct Hybrid Security; and
Annuity.

Table 1: Open fee and costs arrangements

Report Table 1 as at the end of the reporting period.

Table 2: Member accounts (fee and cost arrangements)

Report Table 2 as at the end of the reporting period. Report the number of member accounts and value of member assets at the end of the reporting period for each unique fees and costs arrangement identifier for investment pathways which had member accounts and/or member assets at any time during the reporting period. For Table 2, exclude investment options with the following investment option category types:

Direct Cash Account;
Direct Term Deposit;
Direct Fixed Income Instrument;
Direct Shares;
Direct Hybrid Security; and
Annuity.