© 2026 Zoe. All rights reserved.
Zoe is a legal information platform. Always consult the Federal Register of Legislation for authoritative text.
Commonwealth legislation
This Act has been repealed and is no longer in force. It is retained for historical reference.
This Standard requires general insurers (including foreign branches) to annually report to APRA on subsidiaries and joint ventures via Form GRF 450.0, disclosing identity, ownership, market value, goodwill and geographic assets/liabilities (except where the investee is itself APRA‑regulated).
Reports are due within four months of year‑end, may be filed electronically or on signed paper, are exempt from audit, and support APRA’s prudential supervision—insurer boards must maintain controls and authorisation procedures for the data.
Want the full deep dive?
Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.
Direct links to the current provisions in Financial Sector (Collection of Data) determination No. 28 of 2005.
This reporting standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001 (the Collection of Data Act). It requires general insurers (insurers), including foreign general insurers (foreign insurers) operating in Australia through branch operations, to report to APRA, generally on an annual basis, information on controlled entities and joint venture operations/entities.
This reporting standard outlines the overall requirements for the provision of this information to APRA. It should be read in conjunction with:
(a) in electronic form, using one of the electronic submission mechanisms provided by the ‘Direct to APRA’ (also known as ‘D2A’) application; or
(b) manually completed on paper, which must be faxed or mailed to APRA’s head office.
Note: the Direct to APRA application software and paper forms may be obtained from APRA.
Note: APRA proposes to determine exemptions, under section 7 of the Insurance Act 1973 (Insurance Act), from the obligations under Part IV Division 4 of the Insurance Act in respect of the auditing of information provided under this reporting standard.
(a) more frequently (if, having regard to the particular circumstances of the insurer, APRA considers it necessary or desirable to obtain information more frequently for the purposes of the prudential supervision of the insurer); or
(b) less frequently (if, having regard to the particular circumstances of the insurer and the extent to which it requires prudential supervision, APRA considers it unnecessary to require the insurer to provide the information as frequently as provided by paragraph 5).
The information required by paragraph 3 of this reporting standard must be provided to APRA 4 months after the end of the reporting period to which the information relates.
APRA may grant an insurer an extension of a due date in writing, in which case the new due date for the provision of the information will be the date on the notice of extension.
The information provided by an insurer under this reporting standard must be subject to processes and controls developed by the insurer for the internal review and authorisation of that information. It is the responsibility of the board and senior management of the insurer to ensure that an appropriate set of policies and procedures for the authorisation of data submitted to APRA is in place.
If an insurer submits information under this reporting standard using the ‘Direct to APRA’ software, it will be necessary for an officer of the insurer to digitally sign, authorise and encrypt the relevant data. For this purpose, APRA’s certificate authority will issue ‘digital certificates’, for use with the software, to officers of the insurer who have authority from the insurer to transmit the data to APRA.
If information under this reporting standard is provided in paper form, it must be signed on the front page of the relevant completed form by either:
(a) the Principal Executive Officer of the insurer; or
(b) the Chief Financial Officer of the insurer (whatever his or her official title may be).
(a) a form that is part of this reporting standard, and the instructions to such a form, to correct technical, programming or logical errors, inconsistencies or anomalies; or
(b) the instructions, to clarify their application to the form
without changing any substantive requirement in the form or instructions.
- If APRA makes such a variation it must notify general insurers in writing.
Transitional
Interpretation
approved auditor means an auditor who has been approved by APRA under section 40 of the Insurance Act;
foreign insurer means a foreign general insurer within the meaning of the Insurance Act;
Note: A reference to a ‘branch’ or ‘branch operation’ is a reference to the Australian operations of a foreign insurer.
Insurance Act means the Insurance Act 1973;
insurer means a general insurer within the meaning of the Insurance Act;
Note: In the forms and instructions, a reference to an ‘authorised insurer’, ‘authorised insurance entity’ or ‘licensed insurer’ is a reference to an insurer, and a reference to an ‘authorised reinsurance entity’ is a reference to an insurer whose business consists only of undertaking liability by way of reinsurance.
This reporting standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001 (the Collection of Data Act). It requires general insurers (insurers), including foreign general insurers (foreign insurers) operating in Australia through branch operations, to report to APRA, generally on an annual basis, information on controlled entities and joint venture operations/entities.
This reporting standard outlines the overall requirements for the provision of this information to APRA. It should be read in conjunction with:
(a) in electronic form, using one of the electronic submission mechanisms provided by the ‘Direct to APRA’ (also known as ‘D2A’) application; or
(b) manually completed on paper, which must be faxed or mailed to APRA’s head office.
Note: the Direct to APRA application software and paper forms may be obtained from APRA.
Note: APRA proposes to determine exemptions, under section 7 of the Insurance Act 1973 (Insurance Act), from the obligations under Part IV Division 4 of the Insurance Act in respect of the auditing of information provided under this reporting standard.
(a) more frequently (if, having regard to the particular circumstances of the insurer, APRA considers it necessary or desirable to obtain information more frequently for the purposes of the prudential supervision of the insurer); or
(b) less frequently (if, having regard to the particular circumstances of the insurer and the extent to which it requires prudential supervision, APRA considers it unnecessary to require the insurer to provide the information as frequently as provided by paragraph 5).
The information required by paragraph 3 of this reporting standard must be provided to APRA 4 months after the end of the reporting period to which the information relates.
APRA may grant an insurer an extension of a due date in writing, in which case the new due date for the provision of the information will be the date on the notice of extension.
The information provided by an insurer under this reporting standard must be subject to processes and controls developed by the insurer for the internal review and authorisation of that information. It is the responsibility of the board and senior management of the insurer to ensure that an appropriate set of policies and procedures for the authorisation of data submitted to APRA is in place.
If an insurer submits information under this reporting standard using the ‘Direct to APRA’ software, it will be necessary for an officer of the insurer to digitally sign, authorise and encrypt the relevant data. For this purpose, APRA’s certificate authority will issue ‘digital certificates’, for use with the software, to officers of the insurer who have authority from the insurer to transmit the data to APRA.
If information under this reporting standard is provided in paper form, it must be signed on the front page of the relevant completed form by either:
(a) the Principal Executive Officer of the insurer; or
(b) the Chief Financial Officer of the insurer (whatever his or her official title may be).
(a) a form that is part of this reporting standard, and the instructions to such a form, to correct technical, programming or logical errors, inconsistencies or anomalies; or
(b) the instructions, to clarify their application to the form
without changing any substantive requirement in the form or instructions.
- If APRA makes such a variation it must notify general insurers in writing.
Transitional
Interpretation
approved auditor means an auditor who has been approved by APRA under section 40 of the Insurance Act;
foreign insurer means a foreign general insurer within the meaning of the Insurance Act;
Note: A reference to a ‘branch’ or ‘branch operation’ is a reference to the Australian operations of a foreign insurer.
Insurance Act means the Insurance Act 1973;
insurer means a general insurer within the meaning of the Insurance Act;
Note: In the forms and instructions, a reference to an ‘authorised insurer’, ‘authorised insurance entity’ or ‘licensed insurer’ is a reference to an insurer, and a reference to an ‘authorised reinsurance entity’ is a reference to an insurer whose business consists only of undertaking liability by way of reinsurance.
This reporting standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001 (the Collection of Data Act). It requires general insurers (insurers), including foreign general insurers (foreign insurers) operating in Australia through branch operations, to report to APRA, generally on an annual basis, information on controlled entities and joint venture operations/entities.
This reporting standard outlines the overall requirements for the provision of this information to APRA. It should be read in conjunction with:
(a) in electronic form, using one of the electronic submission mechanisms provided by the ‘Direct to APRA’ (also known as ‘D2A’) application; or
(b) manually completed on paper, which must be faxed or mailed to APRA’s head office.
Note: the Direct to APRA application software and paper forms may be obtained from APRA.
Note: APRA proposes to determine exemptions, under section 7 of the Insurance Act 1973 (Insurance Act), from the obligations under Part IV Division 4 of the Insurance Act in respect of the auditing of information provided under this reporting standard.
(a) more frequently (if, having regard to the particular circumstances of the insurer, APRA considers it necessary or desirable to obtain information more frequently for the purposes of the prudential supervision of the insurer); or
(b) less frequently (if, having regard to the particular circumstances of the insurer and the extent to which it requires prudential supervision, APRA considers it unnecessary to require the insurer to provide the information as frequently as provided by paragraph 5).
The information required by paragraph 3 of this reporting standard must be provided to APRA 4 months after the end of the reporting period to which the information relates.
APRA may grant an insurer an extension of a due date in writing, in which case the new due date for the provision of the information will be the date on the notice of extension.
The information provided by an insurer under this reporting standard must be subject to processes and controls developed by the insurer for the internal review and authorisation of that information. It is the responsibility of the board and senior management of the insurer to ensure that an appropriate set of policies and procedures for the authorisation of data submitted to APRA is in place.
If an insurer submits information under this reporting standard using the ‘Direct to APRA’ software, it will be necessary for an officer of the insurer to digitally sign, authorise and encrypt the relevant data. For this purpose, APRA’s certificate authority will issue ‘digital certificates’, for use with the software, to officers of the insurer who have authority from the insurer to transmit the data to APRA.
If information under this reporting standard is provided in paper form, it must be signed on the front page of the relevant completed form by either:
(a) the Principal Executive Officer of the insurer; or
(b) the Chief Financial Officer of the insurer (whatever his or her official title may be).
(a) a form that is part of this reporting standard, and the instructions to such a form, to correct technical, programming or logical errors, inconsistencies or anomalies; or
(b) the instructions, to clarify their application to the form
without changing any substantive requirement in the form or instructions.
- If APRA makes such a variation it must notify general insurers in writing.
Transitional
Interpretation
approved auditor means an auditor who has been approved by APRA under section 40 of the Insurance Act;
foreign insurer means a foreign general insurer within the meaning of the Insurance Act;
Note: A reference to a ‘branch’ or ‘branch operation’ is a reference to the Australian operations of a foreign insurer.
Insurance Act means the Insurance Act 1973;
insurer means a general insurer within the meaning of the Insurance Act;
Note: In the forms and instructions, a reference to an ‘authorised insurer’, ‘authorised insurance entity’ or ‘licensed insurer’ is a reference to an insurer, and a reference to an ‘authorised reinsurance entity’ is a reference to an insurer whose business consists only of undertaking liability by way of reinsurance.
This reporting standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001 (the Collection of Data Act). It requires general insurers (insurers), including foreign general insurers (foreign insurers) operating in Australia through branch operations, to report to APRA, generally on an annual basis, information on controlled entities and joint venture operations/entities.
This reporting standard outlines the overall requirements for the provision of this information to APRA. It should be read in conjunction with:
(a) in electronic form, using one of the electronic submission mechanisms provided by the ‘Direct to APRA’ (also known as ‘D2A’) application; or
(b) manually completed on paper, which must be faxed or mailed to APRA’s head office.
Note: the Direct to APRA application software and paper forms may be obtained from APRA.
Note: APRA proposes to determine exemptions, under section 7 of the Insurance Act 1973 (Insurance Act), from the obligations under Part IV Division 4 of the Insurance Act in respect of the auditing of information provided under this reporting standard.
(a) more frequently (if, having regard to the particular circumstances of the insurer, APRA considers it necessary or desirable to obtain information more frequently for the purposes of the prudential supervision of the insurer); or
(b) less frequently (if, having regard to the particular circumstances of the insurer and the extent to which it requires prudential supervision, APRA considers it unnecessary to require the insurer to provide the information as frequently as provided by paragraph 5).
The information required by paragraph 3 of this reporting standard must be provided to APRA 4 months after the end of the reporting period to which the information relates.
APRA may grant an insurer an extension of a due date in writing, in which case the new due date for the provision of the information will be the date on the notice of extension.
The information provided by an insurer under this reporting standard must be subject to processes and controls developed by the insurer for the internal review and authorisation of that information. It is the responsibility of the board and senior management of the insurer to ensure that an appropriate set of policies and procedures for the authorisation of data submitted to APRA is in place.
If an insurer submits information under this reporting standard using the ‘Direct to APRA’ software, it will be necessary for an officer of the insurer to digitally sign, authorise and encrypt the relevant data. For this purpose, APRA’s certificate authority will issue ‘digital certificates’, for use with the software, to officers of the insurer who have authority from the insurer to transmit the data to APRA.
If information under this reporting standard is provided in paper form, it must be signed on the front page of the relevant completed form by either:
(a) the Principal Executive Officer of the insurer; or
(b) the Chief Financial Officer of the insurer (whatever his or her official title may be).
(a) a form that is part of this reporting standard, and the instructions to such a form, to correct technical, programming or logical errors, inconsistencies or anomalies; or
(b) the instructions, to clarify their application to the form
without changing any substantive requirement in the form or instructions.
- If APRA makes such a variation it must notify general insurers in writing.
Transitional
Interpretation
approved auditor means an auditor who has been approved by APRA under section 40 of the Insurance Act;
foreign insurer means a foreign general insurer within the meaning of the Insurance Act;
Note: A reference to a ‘branch’ or ‘branch operation’ is a reference to the Australian operations of a foreign insurer.
Insurance Act means the Insurance Act 1973;
insurer means a general insurer within the meaning of the Insurance Act;
Note: In the forms and instructions, a reference to an ‘authorised insurer’, ‘authorised insurance entity’ or ‘licensed insurer’ is a reference to an insurer, and a reference to an ‘authorised reinsurance entity’ is a reference to an insurer whose business consists only of undertaking liability by way of reinsurance.
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
Disclose the market value of the investment of the reporting insurer in the controlled entity. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[1]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the controlled entity is an APRA regulated general insurer. This type of information is reported in GRF 400.0 Statement of Risk by Country.
The countries/regions listed on the form are:
For the purposes of this form, the reference to joint venture includes a joint venture entity and a joint venture operation. Joint venture entity and joint venture operation is to be interpreted as defined in AASB 1006 ‘Accounting For Interests in Joint Ventures’. An extract of the definition in AASB 1006 is provided below:
Joint venture means a contractual arrangement whereby two or more parties undertake an economic activity, which is subject to joint control.
Joint venture entity means a joint venture that is in the form of an entity and does not include:
(a) an entity that is acquired and held exclusively with a view to its disposal in the near future
(b) an entity that operates under severe long-term restrictions which impair significantly its ability to make distributions to the venturer.
Joint venture operation means a joint venture that is not a joint venture entity and does not include an entity that:
(a) is acquired and held exclusively with a view to its disposal in the near future
(b) operates under severe long-term restrictions that impair significantly its ability to make distributions to the venturer.[2]
Report the full name of the Joint Venture.
In the space provided, detail a brief description of the main business conducted by joint venture.
If the joint venture is an APRA regulated general insurance entity input ‘yes’.
If the joint venture is an APRA regulated general insurance entity, then details on exposure of gross assets and gross liabilities in the various countries/geographical regions as required by the form does not need to be completed.
This is the country in which the joint venture is incorporated (where applicable).
Disclose the percentage of the reporting insurer ownership or interest in the joint venture.
Disclose the market value of the investment/interest of the reporting insurer in the Joint Venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[3]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclose that component value of the reporting insurer’s investment/interest in the Joint Venture, that comprises goodwill and other forms of intangible assets.
Disclose the total market value of the joint venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”[4]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of Gross Assets and Gross Liabilities
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to be based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the joint venture is an APRA regulated general insurer.
The countries/regions listed on the form are:
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
Disclose the market value of the investment of the reporting insurer in the controlled entity. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[1]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the controlled entity is an APRA regulated general insurer. This type of information is reported in GRF 400.0 Statement of Risk by Country.
The countries/regions listed on the form are:
For the purposes of this form, the reference to joint venture includes a joint venture entity and a joint venture operation. Joint venture entity and joint venture operation is to be interpreted as defined in AASB 1006 ‘Accounting For Interests in Joint Ventures’. An extract of the definition in AASB 1006 is provided below:
Joint venture means a contractual arrangement whereby two or more parties undertake an economic activity, which is subject to joint control.
Joint venture entity means a joint venture that is in the form of an entity and does not include:
(a) an entity that is acquired and held exclusively with a view to its disposal in the near future
(b) an entity that operates under severe long-term restrictions which impair significantly its ability to make distributions to the venturer.
Joint venture operation means a joint venture that is not a joint venture entity and does not include an entity that:
(a) is acquired and held exclusively with a view to its disposal in the near future
(b) operates under severe long-term restrictions that impair significantly its ability to make distributions to the venturer.[2]
Report the full name of the Joint Venture.
In the space provided, detail a brief description of the main business conducted by joint venture.
If the joint venture is an APRA regulated general insurance entity input ‘yes’.
If the joint venture is an APRA regulated general insurance entity, then details on exposure of gross assets and gross liabilities in the various countries/geographical regions as required by the form does not need to be completed.
This is the country in which the joint venture is incorporated (where applicable).
Disclose the percentage of the reporting insurer ownership or interest in the joint venture.
Disclose the market value of the investment/interest of the reporting insurer in the Joint Venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[3]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclose that component value of the reporting insurer’s investment/interest in the Joint Venture, that comprises goodwill and other forms of intangible assets.
Disclose the total market value of the joint venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”[4]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of Gross Assets and Gross Liabilities
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to be based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the joint venture is an APRA regulated general insurer.
The countries/regions listed on the form are:
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
Disclose the market value of the investment of the reporting insurer in the controlled entity. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[1]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the controlled entity is an APRA regulated general insurer. This type of information is reported in GRF 400.0 Statement of Risk by Country.
The countries/regions listed on the form are:
For the purposes of this form, the reference to joint venture includes a joint venture entity and a joint venture operation. Joint venture entity and joint venture operation is to be interpreted as defined in AASB 1006 ‘Accounting For Interests in Joint Ventures’. An extract of the definition in AASB 1006 is provided below:
Joint venture means a contractual arrangement whereby two or more parties undertake an economic activity, which is subject to joint control.
Joint venture entity means a joint venture that is in the form of an entity and does not include:
(a) an entity that is acquired and held exclusively with a view to its disposal in the near future
(b) an entity that operates under severe long-term restrictions which impair significantly its ability to make distributions to the venturer.
Joint venture operation means a joint venture that is not a joint venture entity and does not include an entity that:
(a) is acquired and held exclusively with a view to its disposal in the near future
(b) operates under severe long-term restrictions that impair significantly its ability to make distributions to the venturer.[2]
Report the full name of the Joint Venture.
In the space provided, detail a brief description of the main business conducted by joint venture.
If the joint venture is an APRA regulated general insurance entity input ‘yes’.
If the joint venture is an APRA regulated general insurance entity, then details on exposure of gross assets and gross liabilities in the various countries/geographical regions as required by the form does not need to be completed.
This is the country in which the joint venture is incorporated (where applicable).
Disclose the percentage of the reporting insurer ownership or interest in the joint venture.
Disclose the market value of the investment/interest of the reporting insurer in the Joint Venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[3]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclose that component value of the reporting insurer’s investment/interest in the Joint Venture, that comprises goodwill and other forms of intangible assets.
Disclose the total market value of the joint venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”[4]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of Gross Assets and Gross Liabilities
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to be based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the joint venture is an APRA regulated general insurer.
The countries/regions listed on the form are:
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
Disclose the market value of the investment of the reporting insurer in the controlled entity. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[1]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the controlled entity is an APRA regulated general insurer. This type of information is reported in GRF 400.0 Statement of Risk by Country.
The countries/regions listed on the form are:
For the purposes of this form, the reference to joint venture includes a joint venture entity and a joint venture operation. Joint venture entity and joint venture operation is to be interpreted as defined in AASB 1006 ‘Accounting For Interests in Joint Ventures’. An extract of the definition in AASB 1006 is provided below:
Joint venture means a contractual arrangement whereby two or more parties undertake an economic activity, which is subject to joint control.
Joint venture entity means a joint venture that is in the form of an entity and does not include:
(a) an entity that is acquired and held exclusively with a view to its disposal in the near future
(b) an entity that operates under severe long-term restrictions which impair significantly its ability to make distributions to the venturer.
Joint venture operation means a joint venture that is not a joint venture entity and does not include an entity that:
(a) is acquired and held exclusively with a view to its disposal in the near future
(b) operates under severe long-term restrictions that impair significantly its ability to make distributions to the venturer.[2]
Report the full name of the Joint Venture.
In the space provided, detail a brief description of the main business conducted by joint venture.
If the joint venture is an APRA regulated general insurance entity input ‘yes’.
If the joint venture is an APRA regulated general insurance entity, then details on exposure of gross assets and gross liabilities in the various countries/geographical regions as required by the form does not need to be completed.
This is the country in which the joint venture is incorporated (where applicable).
Disclose the percentage of the reporting insurer ownership or interest in the joint venture.
Disclose the market value of the investment/interest of the reporting insurer in the Joint Venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[3]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclose that component value of the reporting insurer’s investment/interest in the Joint Venture, that comprises goodwill and other forms of intangible assets.
Disclose the total market value of the joint venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”[4]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of Gross Assets and Gross Liabilities
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to be based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the joint venture is an APRA regulated general insurer.
The countries/regions listed on the form are:
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
Disclose the market value of the investment of the reporting insurer in the controlled entity. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[1]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the controlled entity is an APRA regulated general insurer. This type of information is reported in GRF 400.0 Statement of Risk by Country.
The countries/regions listed on the form are:
For the purposes of this form, the reference to joint venture includes a joint venture entity and a joint venture operation. Joint venture entity and joint venture operation is to be interpreted as defined in AASB 1006 ‘Accounting For Interests in Joint Ventures’. An extract of the definition in AASB 1006 is provided below:
Joint venture means a contractual arrangement whereby two or more parties undertake an economic activity, which is subject to joint control.
Joint venture entity means a joint venture that is in the form of an entity and does not include:
(a) an entity that is acquired and held exclusively with a view to its disposal in the near future
(b) an entity that operates under severe long-term restrictions which impair significantly its ability to make distributions to the venturer.
Joint venture operation means a joint venture that is not a joint venture entity and does not include an entity that:
(a) is acquired and held exclusively with a view to its disposal in the near future
(b) operates under severe long-term restrictions that impair significantly its ability to make distributions to the venturer.[2]
Report the full name of the Joint Venture.
In the space provided, detail a brief description of the main business conducted by joint venture.
If the joint venture is an APRA regulated general insurance entity input ‘yes’.
If the joint venture is an APRA regulated general insurance entity, then details on exposure of gross assets and gross liabilities in the various countries/geographical regions as required by the form does not need to be completed.
This is the country in which the joint venture is incorporated (where applicable).
Disclose the percentage of the reporting insurer ownership or interest in the joint venture.
Disclose the market value of the investment/interest of the reporting insurer in the Joint Venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[3]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclose that component value of the reporting insurer’s investment/interest in the Joint Venture, that comprises goodwill and other forms of intangible assets.
Disclose the total market value of the joint venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”[4]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of Gross Assets and Gross Liabilities
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to be based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the joint venture is an APRA regulated general insurer.
The countries/regions listed on the form are:
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
Disclose the market value of the investment of the reporting insurer in the controlled entity. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[1]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the controlled entity is an APRA regulated general insurer. This type of information is reported in GRF 400.0 Statement of Risk by Country.
The countries/regions listed on the form are:
For the purposes of this form, the reference to joint venture includes a joint venture entity and a joint venture operation. Joint venture entity and joint venture operation is to be interpreted as defined in AASB 1006 ‘Accounting For Interests in Joint Ventures’. An extract of the definition in AASB 1006 is provided below:
Joint venture means a contractual arrangement whereby two or more parties undertake an economic activity, which is subject to joint control.
Joint venture entity means a joint venture that is in the form of an entity and does not include:
(a) an entity that is acquired and held exclusively with a view to its disposal in the near future
(b) an entity that operates under severe long-term restrictions which impair significantly its ability to make distributions to the venturer.
Joint venture operation means a joint venture that is not a joint venture entity and does not include an entity that:
(a) is acquired and held exclusively with a view to its disposal in the near future
(b) operates under severe long-term restrictions that impair significantly its ability to make distributions to the venturer.[2]
Report the full name of the Joint Venture.
In the space provided, detail a brief description of the main business conducted by joint venture.
If the joint venture is an APRA regulated general insurance entity input ‘yes’.
If the joint venture is an APRA regulated general insurance entity, then details on exposure of gross assets and gross liabilities in the various countries/geographical regions as required by the form does not need to be completed.
This is the country in which the joint venture is incorporated (where applicable).
Disclose the percentage of the reporting insurer ownership or interest in the joint venture.
Disclose the market value of the investment/interest of the reporting insurer in the Joint Venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[3]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclose that component value of the reporting insurer’s investment/interest in the Joint Venture, that comprises goodwill and other forms of intangible assets.
Disclose the total market value of the joint venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”[4]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of Gross Assets and Gross Liabilities
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to be based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the joint venture is an APRA regulated general insurer.
The countries/regions listed on the form are:
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
Disclose the market value of the investment of the reporting insurer in the controlled entity. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[1]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the controlled entity is an APRA regulated general insurer. This type of information is reported in GRF 400.0 Statement of Risk by Country.
The countries/regions listed on the form are:
For the purposes of this form, the reference to joint venture includes a joint venture entity and a joint venture operation. Joint venture entity and joint venture operation is to be interpreted as defined in AASB 1006 ‘Accounting For Interests in Joint Ventures’. An extract of the definition in AASB 1006 is provided below:
Joint venture means a contractual arrangement whereby two or more parties undertake an economic activity, which is subject to joint control.
Joint venture entity means a joint venture that is in the form of an entity and does not include:
(a) an entity that is acquired and held exclusively with a view to its disposal in the near future
(b) an entity that operates under severe long-term restrictions which impair significantly its ability to make distributions to the venturer.
Joint venture operation means a joint venture that is not a joint venture entity and does not include an entity that:
(a) is acquired and held exclusively with a view to its disposal in the near future
(b) operates under severe long-term restrictions that impair significantly its ability to make distributions to the venturer.[2]
Report the full name of the Joint Venture.
In the space provided, detail a brief description of the main business conducted by joint venture.
If the joint venture is an APRA regulated general insurance entity input ‘yes’.
If the joint venture is an APRA regulated general insurance entity, then details on exposure of gross assets and gross liabilities in the various countries/geographical regions as required by the form does not need to be completed.
This is the country in which the joint venture is incorporated (where applicable).
Disclose the percentage of the reporting insurer ownership or interest in the joint venture.
Disclose the market value of the investment/interest of the reporting insurer in the Joint Venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[3]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclose that component value of the reporting insurer’s investment/interest in the Joint Venture, that comprises goodwill and other forms of intangible assets.
Disclose the total market value of the joint venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”[4]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of Gross Assets and Gross Liabilities
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to be based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the joint venture is an APRA regulated general insurer.
The countries/regions listed on the form are:
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
Disclose the market value of the investment of the reporting insurer in the controlled entity. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[1]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the controlled entity is an APRA regulated general insurer. This type of information is reported in GRF 400.0 Statement of Risk by Country.
The countries/regions listed on the form are:
For the purposes of this form, the reference to joint venture includes a joint venture entity and a joint venture operation. Joint venture entity and joint venture operation is to be interpreted as defined in AASB 1006 ‘Accounting For Interests in Joint Ventures’. An extract of the definition in AASB 1006 is provided below:
Joint venture means a contractual arrangement whereby two or more parties undertake an economic activity, which is subject to joint control.
Joint venture entity means a joint venture that is in the form of an entity and does not include:
(a) an entity that is acquired and held exclusively with a view to its disposal in the near future
(b) an entity that operates under severe long-term restrictions which impair significantly its ability to make distributions to the venturer.
Joint venture operation means a joint venture that is not a joint venture entity and does not include an entity that:
(a) is acquired and held exclusively with a view to its disposal in the near future
(b) operates under severe long-term restrictions that impair significantly its ability to make distributions to the venturer.[2]
Report the full name of the Joint Venture.
In the space provided, detail a brief description of the main business conducted by joint venture.
If the joint venture is an APRA regulated general insurance entity input ‘yes’.
If the joint venture is an APRA regulated general insurance entity, then details on exposure of gross assets and gross liabilities in the various countries/geographical regions as required by the form does not need to be completed.
This is the country in which the joint venture is incorporated (where applicable).
Disclose the percentage of the reporting insurer ownership or interest in the joint venture.
Disclose the market value of the investment/interest of the reporting insurer in the Joint Venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[3]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclose that component value of the reporting insurer’s investment/interest in the Joint Venture, that comprises goodwill and other forms of intangible assets.
Disclose the total market value of the joint venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”[4]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of Gross Assets and Gross Liabilities
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to be based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the joint venture is an APRA regulated general insurer.
The countries/regions listed on the form are:
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
Disclose the market value of the investment of the reporting insurer in the controlled entity. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[1]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the controlled entity is an APRA regulated general insurer. This type of information is reported in GRF 400.0 Statement of Risk by Country.
The countries/regions listed on the form are:
For the purposes of this form, the reference to joint venture includes a joint venture entity and a joint venture operation. Joint venture entity and joint venture operation is to be interpreted as defined in AASB 1006 ‘Accounting For Interests in Joint Ventures’. An extract of the definition in AASB 1006 is provided below:
Joint venture means a contractual arrangement whereby two or more parties undertake an economic activity, which is subject to joint control.
Joint venture entity means a joint venture that is in the form of an entity and does not include:
(a) an entity that is acquired and held exclusively with a view to its disposal in the near future
(b) an entity that operates under severe long-term restrictions which impair significantly its ability to make distributions to the venturer.
Joint venture operation means a joint venture that is not a joint venture entity and does not include an entity that:
(a) is acquired and held exclusively with a view to its disposal in the near future
(b) operates under severe long-term restrictions that impair significantly its ability to make distributions to the venturer.[2]
Report the full name of the Joint Venture.
In the space provided, detail a brief description of the main business conducted by joint venture.
If the joint venture is an APRA regulated general insurance entity input ‘yes’.
If the joint venture is an APRA regulated general insurance entity, then details on exposure of gross assets and gross liabilities in the various countries/geographical regions as required by the form does not need to be completed.
This is the country in which the joint venture is incorporated (where applicable).
Disclose the percentage of the reporting insurer ownership or interest in the joint venture.
Disclose the market value of the investment/interest of the reporting insurer in the Joint Venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[3]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclose that component value of the reporting insurer’s investment/interest in the Joint Venture, that comprises goodwill and other forms of intangible assets.
Disclose the total market value of the joint venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”[4]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of Gross Assets and Gross Liabilities
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to be based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the joint venture is an APRA regulated general insurer.
The countries/regions listed on the form are:
This form captures information on the reporting an insurer’s interest in controlled entities and joint venture entities and joint venture operations.
Audit requirements
The information provided under the form is not required to be audited and has been exempted from the definition of ‘yearly statutory accounts’.
Reporting entities
Forms are to be completed for the following reporting entities where appropriate:
Unit of measurement
This form is to be presented in Australian currency, rounded to thousands of dollars, with no decimal place. As a general rule, amounts denominated in foreign currency are to be converted to AUD in accordance with the requirements of the Australian accounting standards, notably AASB 1012 ‘Foreign Currency Translation’.
Insurers are requested to follow the recognition and measurement basis required by the APRA forms for the purposes of completing this form.
Reporting period
Insurers are required to report the information in the reporting form on an annual basis.
This form must be lodged for each of the reporting units within the number of business days after the end of the quarter as set out in the Reporting Requirements table.
Specific instructions
This form is separated into the following parts:
The requirements for each of these are detailed below:
Part A: Interest in Controlled Entities
Disclose the market value of the investment of the reporting insurer in the controlled entity. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[1]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the controlled entity is an APRA regulated general insurer. This type of information is reported in GRF 400.0 Statement of Risk by Country.
The countries/regions listed on the form are:
For the purposes of this form, the reference to joint venture includes a joint venture entity and a joint venture operation. Joint venture entity and joint venture operation is to be interpreted as defined in AASB 1006 ‘Accounting For Interests in Joint Ventures’. An extract of the definition in AASB 1006 is provided below:
Joint venture means a contractual arrangement whereby two or more parties undertake an economic activity, which is subject to joint control.
Joint venture entity means a joint venture that is in the form of an entity and does not include:
(a) an entity that is acquired and held exclusively with a view to its disposal in the near future
(b) an entity that operates under severe long-term restrictions which impair significantly its ability to make distributions to the venturer.
Joint venture operation means a joint venture that is not a joint venture entity and does not include an entity that:
(a) is acquired and held exclusively with a view to its disposal in the near future
(b) operates under severe long-term restrictions that impair significantly its ability to make distributions to the venturer.[2]
Report the full name of the Joint Venture.
In the space provided, detail a brief description of the main business conducted by joint venture.
If the joint venture is an APRA regulated general insurance entity input ‘yes’.
If the joint venture is an APRA regulated general insurance entity, then details on exposure of gross assets and gross liabilities in the various countries/geographical regions as required by the form does not need to be completed.
This is the country in which the joint venture is incorporated (where applicable).
Disclose the percentage of the reporting insurer ownership or interest in the joint venture.
Disclose the market value of the investment/interest of the reporting insurer in the Joint Venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”.[3]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclose that component value of the reporting insurer’s investment/interest in the Joint Venture, that comprises goodwill and other forms of intangible assets.
Disclose the total market value of the joint venture. Market value is to be interpreted as defined in accordance with the Australian accounting pronouncements.
“Market value means the amount which could be expected to be received from the disposal of an asset in an orderly market”[4]
Market value or fair value has the same meaning as defined in the Australian Accounting standards. Market value is defined for accounting purposes as a subset of fair value, where fair value means the amount for which an asset could be exchanged, or a liability settled, between knowledgeable, willing parties in an arm's-length transaction, and is determined as follows:
Disclosure of Gross Assets and Gross Liabilities
Disclosure of ‘Gross Assets’ and ‘Gross Liabilities’ reported by country or geographic region specified on the form. This is to be based on where the items of assets are invested and liabilities incurred. Enter the relevant details for each country/region as appropriate.
Do not disclose this information if the joint venture is an APRA regulated general insurer.
The countries/regions listed on the form are:
Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.
This reporting standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001 (the Collection of Data Act). It requires general insurers (insurers), including foreign general insurers (foreign insurers) operating in Australia through branch operations, to report to APRA, generally on an annual basis, information on controlled entities and joint venture operations/entities.
This reporting standard outlines the overall requirements for the provision of this information to APRA. It should be read in conjunction with:
(a) in electronic form, using one of the electronic submission mechanisms provided by the ‘Direct to APRA’ (also known as ‘D2A’) application; or
(b) manually completed on paper, which must be faxed or mailed to APRA’s head office.
Note: the Direct to APRA application software and paper forms may be obtained from APRA.
Note: APRA proposes to determine exemptions, under section 7 of the Insurance Act 1973 (Insurance Act), from the obligations under Part IV Division 4 of the Insurance Act in respect of the auditing of information provided under this reporting standard.
(a) more frequently (if, having regard to the particular circumstances of the insurer, APRA considers it necessary or desirable to obtain information more frequently for the purposes of the prudential supervision of the insurer); or
(b) less frequently (if, having regard to the particular circumstances of the insurer and the extent to which it requires prudential supervision, APRA considers it unnecessary to require the insurer to provide the information as frequently as provided by paragraph 5).
The information required by paragraph 3 of this reporting standard must be provided to APRA 4 months after the end of the reporting period to which the information relates.
APRA may grant an insurer an extension of a due date in writing, in which case the new due date for the provision of the information will be the date on the notice of extension.
The information provided by an insurer under this reporting standard must be subject to processes and controls developed by the insurer for the internal review and authorisation of that information. It is the responsibility of the board and senior management of the insurer to ensure that an appropriate set of policies and procedures for the authorisation of data submitted to APRA is in place.
If an insurer submits information under this reporting standard using the ‘Direct to APRA’ software, it will be necessary for an officer of the insurer to digitally sign, authorise and encrypt the relevant data. For this purpose, APRA’s certificate authority will issue ‘digital certificates’, for use with the software, to officers of the insurer who have authority from the insurer to transmit the data to APRA.
If information under this reporting standard is provided in paper form, it must be signed on the front page of the relevant completed form by either:
(a) the Principal Executive Officer of the insurer; or
(b) the Chief Financial Officer of the insurer (whatever his or her official title may be).
(a) a form that is part of this reporting standard, and the instructions to such a form, to correct technical, programming or logical errors, inconsistencies or anomalies; or
(b) the instructions, to clarify their application to the form
without changing any substantive requirement in the form or instructions.
- If APRA makes such a variation it must notify general insurers in writing.
Transitional
Interpretation
approved auditor means an auditor who has been approved by APRA under section 40 of the Insurance Act;
foreign insurer means a foreign general insurer within the meaning of the Insurance Act;
Note: A reference to a ‘branch’ or ‘branch operation’ is a reference to the Australian operations of a foreign insurer.
Insurance Act means the Insurance Act 1973;
insurer means a general insurer within the meaning of the Insurance Act;
Note: In the forms and instructions, a reference to an ‘authorised insurer’, ‘authorised insurance entity’ or ‘licensed insurer’ is a reference to an insurer, and a reference to an ‘authorised reinsurance entity’ is a reference to an insurer whose business consists only of undertaking liability by way of reinsurance.
This reporting standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001 (the Collection of Data Act). It requires general insurers (insurers), including foreign general insurers (foreign insurers) operating in Australia through branch operations, to report to APRA, generally on an annual basis, information on controlled entities and joint venture operations/entities.
This reporting standard outlines the overall requirements for the provision of this information to APRA. It should be read in conjunction with:
(a) in electronic form, using one of the electronic submission mechanisms provided by the ‘Direct to APRA’ (also known as ‘D2A’) application; or
(b) manually completed on paper, which must be faxed or mailed to APRA’s head office.
Note: the Direct to APRA application software and paper forms may be obtained from APRA.
Note: APRA proposes to determine exemptions, under section 7 of the Insurance Act 1973 (Insurance Act), from the obligations under Part IV Division 4 of the Insurance Act in respect of the auditing of information provided under this reporting standard.
(a) more frequently (if, having regard to the particular circumstances of the insurer, APRA considers it necessary or desirable to obtain information more frequently for the purposes of the prudential supervision of the insurer); or
(b) less frequently (if, having regard to the particular circumstances of the insurer and the extent to which it requires prudential supervision, APRA considers it unnecessary to require the insurer to provide the information as frequently as provided by paragraph 5).
The information required by paragraph 3 of this reporting standard must be provided to APRA 4 months after the end of the reporting period to which the information relates.
APRA may grant an insurer an extension of a due date in writing, in which case the new due date for the provision of the information will be the date on the notice of extension.
The information provided by an insurer under this reporting standard must be subject to processes and controls developed by the insurer for the internal review and authorisation of that information. It is the responsibility of the board and senior management of the insurer to ensure that an appropriate set of policies and procedures for the authorisation of data submitted to APRA is in place.
If an insurer submits information under this reporting standard using the ‘Direct to APRA’ software, it will be necessary for an officer of the insurer to digitally sign, authorise and encrypt the relevant data. For this purpose, APRA’s certificate authority will issue ‘digital certificates’, for use with the software, to officers of the insurer who have authority from the insurer to transmit the data to APRA.
If information under this reporting standard is provided in paper form, it must be signed on the front page of the relevant completed form by either:
(a) the Principal Executive Officer of the insurer; or
(b) the Chief Financial Officer of the insurer (whatever his or her official title may be).
(a) a form that is part of this reporting standard, and the instructions to such a form, to correct technical, programming or logical errors, inconsistencies or anomalies; or
(b) the instructions, to clarify their application to the form
without changing any substantive requirement in the form or instructions.
- If APRA makes such a variation it must notify general insurers in writing.
Transitional
Interpretation
approved auditor means an auditor who has been approved by APRA under section 40 of the Insurance Act;
foreign insurer means a foreign general insurer within the meaning of the Insurance Act;
Note: A reference to a ‘branch’ or ‘branch operation’ is a reference to the Australian operations of a foreign insurer.
Insurance Act means the Insurance Act 1973;
insurer means a general insurer within the meaning of the Insurance Act;
Note: In the forms and instructions, a reference to an ‘authorised insurer’, ‘authorised insurance entity’ or ‘licensed insurer’ is a reference to an insurer, and a reference to an ‘authorised reinsurance entity’ is a reference to an insurer whose business consists only of undertaking liability by way of reinsurance.
This reporting standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001 (the Collection of Data Act). It requires general insurers (insurers), including foreign general insurers (foreign insurers) operating in Australia through branch operations, to report to APRA, generally on an annual basis, information on controlled entities and joint venture operations/entities.
This reporting standard outlines the overall requirements for the provision of this information to APRA. It should be read in conjunction with:
(a) in electronic form, using one of the electronic submission mechanisms provided by the ‘Direct to APRA’ (also known as ‘D2A’) application; or
(b) manually completed on paper, which must be faxed or mailed to APRA’s head office.
Note: the Direct to APRA application software and paper forms may be obtained from APRA.
Note: APRA proposes to determine exemptions, under section 7 of the Insurance Act 1973 (Insurance Act), from the obligations under Part IV Division 4 of the Insurance Act in respect of the auditing of information provided under this reporting standard.
(a) more frequently (if, having regard to the particular circumstances of the insurer, APRA considers it necessary or desirable to obtain information more frequently for the purposes of the prudential supervision of the insurer); or
(b) less frequently (if, having regard to the particular circumstances of the insurer and the extent to which it requires prudential supervision, APRA considers it unnecessary to require the insurer to provide the information as frequently as provided by paragra
This is an opening excerpt, not the complete document.