Electrical Safety Regulation 2013
sec.161Grounds for cancelling certificate of conformity
Start here
Get a plain-English read of sec.161
Turn the raw legal text into a practical explanation grounded in Electrical Safety Regulation 2013.
sec.161 Grounds for cancelling certificate of conformity
Each of the following is a ground for cancelling a certificate of conformity for a type of level 3 in-scope electrical equipment issued under this division— an item of the type does not meet the relevant standard for the type; an item of the type is, or is likely to be or to become, dangerous in normal use; the certificate was obtained by misleading information; an item of the type, or purportedly of the type, is found, on examination by the regulator, to be substantially different from the type as described in— the certificate; or a test report forming the basis for the issuing of the certificate; the holder of the certificate contravenes the Act or this regulation.
- (a) an item of the type does not meet the relevant standard for the type;
- (b) an item of the type is, or is likely to be or to become, dangerous in normal use;
- (c) the certificate was obtained by misleading information;
- (d) an item of the type, or purportedly of the type, is found, on examination by the regulator, to be substantially different from the type as described in— (i) the certificate; or (ii) a test report forming the basis for the issuing of the certificate;
- (i) the certificate; or
- (ii) a test report forming the basis for the issuing of the certificate;
- (e) the holder of the certificate contravenes the Act or this regulation.
- (i) the certificate; or
- (ii) a test report forming the basis for the issuing of the certificate;