4DCrown building work—designs prepared

#### 4D Crown building work—designs prepared 4D Crown building work—designs prepared > > (1) This clause applies to a design for Crown building work if— > > > > > (a) the design was prepared before 1 July 2021, and > > > > > (b) the person who prepared the design is not eligible to be registered after 30 June 2021 in a class that would permit the person to provide a design compliance declaration for the design, and > > > > > (c) the Crown building work to which it relates is commenced after 31 July 2021 and before 1 July 2022. > > > (2) The design is taken to be a regulated design for which a design compliance declaration has been given if a registered design practitioner— > > > > > (a) assesses whether or not the design complies with the requirements of the Building Code of Australia, and > > > > > (b) issues a certificate in an approved form that the design does comply with the requirements. > > > (3) The registered building practitioner must not carry out Crown building work to which the design relates until copies of the design and certificate are provided to the Secretary. > > > > Maximum penalty—200 penalty units for a body corporate or 100 penalty units for an individual. > > > (4) If a design that is taken to be a regulated design is varied on or after 1 July 2021, this clause no longer applies to the design. > > > > Note— > > > > A registered design practitioner will be required to prepare the varied design.