69Aluminium sheet used in the manufacture of aluminium cans (item 49)

69 Aluminium sheet used in the manufacture of aluminium cans (item 49)

By-law (1) This section may be cited as Customs By‑law No. 2300074. Prescribed goods (2) For the purposes of item 49, goods that are aluminium sheets, classified under tariff subheadings 7606.12.00 or 7606.92.00, and are any one of the following, are goods to which that item applies: (a) aluminium sheets, for use as body stock, and being each of the following: (i) in coils; (ii) gauge more than 0.26 mm but no more than 0.28 mm; (iii) alloy composition of 3004 or 3104 as per the International Alloy Designation System; (iv) temper of H19 as per Australian Standard AS 2848.1-1998; and (v) coated with oil; or (b) aluminium sheets, for use as end stock, and being each of the following: (i) in coils; (ii) gauge more than 0.23 mm but no more than 0.2 mm; (iii) alloy composition of 5182 as per the International Alloy Designation System; (iv) temper of H19 or H48 as per Australian Standard AS 2848.1-1998; and (v) polymer coated; or (c) aluminium sheets, for use as tab stock, and being each of the following: (i) in coils; (ii) gauge more than 0.22 mm but no more than 0.32 mm; (iii) alloy composition of 5082 or 5182 as per the International Alloy Designation System; and (iv) temper of H19, H39, H391 or H48 as per Australian Standard AS 2848.1-1998. Conditions (3) Item 49 applies to those goods covered by subsection (2) subject to the condition that those goods are to be used in the manufacture of aluminium cans.