(c) the plastic explosive breaches a marking requirement; and
(d) the possession is not authorised under section 72.18, 72.19, 72.22 or 72.23.
Penalty: Imprisonment for 2 years.
(2) The fault element for paragraph (1)(b) is recklessness.
(3) Strict liability applies to paragraphs (1)(c) and (d).
Note 1: For the marking requirements, see section 72.33.
Note 2: For defences, see section 72.16.
72.16 Defences
(1) If:
(a) a person is charged with an offence against section 72.12, 72.13, 72.14 or 72.15; and
(b) the prosecution alleges that the plastic explosive breached a particular marking requirement;
it is a defence if the defendant proves that he or she had no reasonable grounds for suspecting that the plastic explosive breached that marking requirement.
Note 1: A defendant bears a legal burden in relation to the matter in subsection (1) (see section 13.4).
Note 2: For the marking requirements, see section 72.33.
(2) If:
(a) a person is charged with an offence against section 72.12, 72.13 or 72.15; and
(b) the prosecution alleges that the plastic explosive breached the second marking requirement;
it is a defence if the defendant proves that, at the time of the alleged offence:
(c) the plastic explosive contained a detection agent; and
(d) the concentration of the detection agent in the plastic explosive was not less than the minimum manufacture concentration for the detection agent; and
(e) the detection agent was homogenously distributed throughout the plastic explosive.
Note 1: A defendant bears a legal burden in relation to the matter in subsection (2) (see section 13.4).
Note 2: For the marking requirements, see section 72.33.
Note 3: For minimum manufacture concentration, see section 72.34.
72.17 Packaging requirements for plastic explosives
(1) A person commits an offence if:
(a) the person manufactures a substance; and
(b) the substance is a plastic explosive; and
(c) within 24 hours after the manufacture of the plastic explosive, the person does not cause the plastic explosive to be contained, enclosed or packaged in a wrapper with:
(i) the expression “PLASTIC EXPLOSIVE” (in upper‑case lettering); and
(ii) the date of manufacture of the plastic explosive; and
(iii) if the plastic explosive is of a prescribed type—that type; and
(iv) if the plastic explosive contains a detection agent for the purpose of meeting the first marking requirement—the name of the detection agent; and
(v) if the plastic explosive contains a detection agent for the purpose of meeting the first marking requirement—the concentration of the detection agent in the plastic explosive at the time of manufacture, expressed as a percentage by mass;
legibly displayed on the outer surface of the wrapper.
Penalty: Imprisonment for 2 years.
(2) The fault element for paragraphs (1)(b) and (c) is recklessness.
72.18 Authorisation for research etc.
Authorisation
(1) A responsible Minister may, by writing, authorise:
(a) the trafficking in; or
(b) the import, export, manufacture or possession of;
an unmarked plastic explosive.
(2) A responsible Minister must not give an authorisation under subsection (1) in relation to an unmarked plastic explosive unless the responsible Minister is satisfied that:
(a) the plastic explosive is for use exclusively for one or more of the following:
(i) research, development or testing of new or modified explosives;
(ii) development or testing of explosives detection equipment;
(iii) training in explosives detection;
(iv) forensic science; or
(b) both:
(i) the plastic explosive is an integral part of an explosive device that was manufactured exclusively for defence purposes; and
(ii) the explosive device is for use exclusively for defence purposes; or
(c) the plastic explosive will, within 3 years after the commencement of this section, become an integral part of an explosive device manufactured exclusively for defence purposes.
(3) An authorisation under subsection (1) must specify the grounds on which it was given.
Conditions and restrictions
(4) An authorisation under subsection (1) is subject to such conditions and restrictions as are specified in the authorisation.
(5) A responsible Minister must not give an authorisation under subsection (1) in relation to an unmarked plastic explosive on grounds covered by paragraph (2)(a) unless the authorisation is subject to a condition imposing a limit as to the quantity of the plastic explosive.
Criteria
(6) In exercising a power conferred by this section in relation to:
(a) the trafficking in; or
(b) the import, export, manufacture or possession of;
an unmarked plastic explosive, a responsible Minister must have regard to:
(c) the Convention on the Marking of Plastic Explosives; and
(d) whether the trafficking, import, export, manufacture or possession is reasonable; and
(e) such other matters (if any) as the responsible Minister considers relevant.
72.19 Authorisation for defence and police purposes—15 year limit
Authorisation
(1) A responsible Minister may, by writing, authorise:
(a) the trafficking in; or
(b) the import, export or possession of;
an unmarked plastic explosive that was manufactured before the commencement of this section.
(2) A responsible Minister must not give an authorisation under subsection (1) in relation to an unmarked plastic explosive unless the responsible Minister is satisfied that the plastic explosive is exclusively for use in connection with:
(a) the operation of the Australian Defence Force; or
(b) the operation in Australia of a visiting force (within the meaning of the Defence (Visiting Forces) Act 1963); or
(c) the operation of:
(i) the Australian Federal Police; or
(ii) the police force or police service of a State or Territory.
Conditions and restrictions
(3) An authorisation under subsection (1) is subject to such conditions and restrictions as are specified in the authorisation.
Criteria
(4) In exercising a power conferred by this section in relation to:
(a) the trafficking in; or
(b) the import, export or possession of;
an unmarked plastic explosive, a responsible Minister must have regard to:
(c) the Convention on the Marking of Plastic Explosives; and
(d) whether the trafficking, import, export or possession is reasonable; and
(e) such other matters (if any) as the responsible Minister considers relevant.
Sunset
(5) This section ceases to have effect at the end of 15 years after its commencement.
72.22 Authorisation for overseas defence purposes—7 day limit
(1) A member of the Australian Defence Force is authorised to possess, import or traffic in an unmarked plastic explosive if:
(a) the plastic explosive was obtained in the course of the operation outside Australia of the Australian Defence Force; and
(b) the member believes on reasonable grounds that there is insufficient time to obtain an authorisation under this Subdivision because of:
(i) an emergency; or
(ii) any other sudden or unexpected circumstances.
(2) An authorisation under subsection (1) ceases to have effect at the end of the seventh day after the day on which the plastic explosive was obtained.
72.23 Authorisation for overseas Australian Federal Police purposes—7 day limit
(1) A member of the Australian Federal Police is authorised to possess, import or traffic in an unmarked plastic explosive if:
(a) the plastic explosive was obtained in the course of the operation outside Australia of the Australian Federal Police; and
(b) the member believes on reasonable grounds that there is insufficient time to obtain an authorisation under this Subdivision because of:
(i) an emergency; or
(ii) any other sudden or unexpected circumstances.
(2) An authorisation under subsection (1) ceases to have effect at the end of the seventh day after the day on which the plastic explosive was obtained.
72.24 Forfeited plastic explosives
(1) If a court:
(a) convicts a person of an offence against this Subdivision in relation to a plastic explosive; or
(b) makes an order under section 19B of the Crimes Act 1914 in respect of a person charged with an offence against this Subdivision in relation to a plastic explosive;
the court may order the forfeiture to the Commonwealth of the plastic explosive.
(2) A plastic explosive forfeited to the Commonwealth under subsection (1) becomes the property of the Commonwealth.
(3) A plastic explosive forfeited to the Commonwealth under subsection (1) is to be dealt with in such manner as a responsible Minister directs.
(4) Without limiting subsection (3), a responsible Minister may direct that a plastic explosive forfeited to the Commonwealth under subsection (1) be:
(a) destroyed; or
(b) used exclusively for one or more of the purposes covered by paragraph 72.18(2)(a).
Note 1: See also section 10.5 (lawful authority).
Note 2: See also section 229 of the Customs Act 1901 (forfeiture of goods that have been unlawfully imported or exported).
72.25 Surrendered plastic explosives
(1) A person may surrender a plastic explosive to the Commonwealth at a place, and in a manner, prescribed for the purposes of this subsection.
(2) A plastic explosive surrendered to the Commonwealth under subsection (1) becomes the property of the Commonwealth.
(3) A plastic explosive surrendered to the Commonwealth under subsection (1) is to be dealt with in such manner as a responsible Minister directs.
(4) Without limiting subsection (3), a responsible Minister may direct that a plastic explosive surrendered to the Commonwealth under subsection (1) be:
(a) destroyed; or
(b) used exclusively for one or more of the purposes covered by paragraph 72.18(2)(a).
Note: See also section 10.5 (lawful authority).
72.26 Destruction of plastic explosives obtained overseas for defence purposes
A member of the Australian Defence Force may destroy an unmarked plastic explosive if the plastic explosive was obtained in the course of the operation outside Australia of the Australian Defence Force.
72.27 Destruction of plastic explosives obtained overseas for Australian Federal Police purposes
A member of the Australian Federal Police may destroy an unmarked plastic explosive if the plastic explosive was obtained in the course of the operation outside Australia of the Australian Federal Police.
72.28 Delegation by AFP Minister
(1) The AFP Minister may, by writing, delegate to:
(a) the Secretary of the Department administered by that Minister; or
(b) an SES employee, or an acting SES employee, in that Department, where the employee occupies or acts in a position with a classification of Senior Executive Band 3;
all or any of the AFP Minister’s powers under sections 72.18, 72.19, 72.24 and 72.25.
(2) A delegate is, in the exercise of a power delegated under subsection (1), subject to the written directions of the AFP Minister.
72.29 Delegation by Minister for Defence
(1) The Minister for Defence may, by writing, delegate to:
(a) an SES employee, or an acting SES employee, in the Department of Defence, where the employee occupies or acts in a position with a classification of Senior Executive Band 3; or
(b) an officer of the Australian Navy who holds the rank of Vice‑Admiral or a higher rank; or
(c) an officer of the Australian Army who holds the rank of Lieutenant‑General or a higher rank; or
(d) an officer of the Australian Air Force who holds the rank of Air Marshal or a higher rank; or
(e) an officer of the Australian Defence Force who is on deployment as the Commander of an Australian Task Force, contingent or force element that is operating outside Australia;
all or any of the powers of the Minister for Defence under sections 72.18, 72.19, 72.24 and 72.25.
(2) A delegate must not exercise a power delegated under subsection (1) unless the exercise of the power relates to:
(a) the operation of the Australian Defence Force; or
(b) the operation in Australia of a visiting force (within the meaning of the Defence (Visiting Forces) Act 1963); or
(c) the operation outside Australia of a person who, under a contract, performs services for the Australian Defence Force.
(3) A delegate is, in the exercise of a power delegated under subsection (1), subject to the written directions of the Minister for Defence.
72.30 Review by Administrative Review Tribunal of authorisation decisions
(1) An application may be made to the Administrative Review Tribunal for review of a decision refusing to give an authorisation under subsection 72.18(1) or 72.19(1).
(2) An application may be made to the Administrative Review Tribunal for review of a decision to specify a condition or restriction in an authorisation under subsection 72.18(1) or 72.19(1), but such an application may only be made by a person to whom the authorisation applies.
72.31 Geographical jurisdiction
Section 15.2 (extended geographical jurisdiction—category B) applies to each offence against this Subdivision.
72.32 Saving of other laws
This Subdivision is not intended to exclude or limit the operation of any other law of the Commonwealth or of a State or Territory.
72.33 Marking requirements
(1) This section sets out the 2 marking requirements for a plastic explosive.
Concentration of detection agent at time of manufacture
(2) The first marking requirement is that, at the time of the manufacture of the plastic explosive, all of the following conditions were satisfied:
(a) the plastic explosive contained a detection agent;
(b) the concentration of the detection agent in the plastic explosive was not less than the minimum manufacture concentration for the detection agent;
(c) the detection agent was homogenously distributed throughout the plastic explosive.
Note: For minimum manufacture concentration, see section 72.34.
Freshness
(3) The second marking requirement is that less than 10 years have elapsed since the manufacture of the plastic explosive.
Interpretation
(4) In determining whether a plastic explosive manufactured before the commencement of this section breached the first marking requirement, assume that this section and sections 72.34 and 72.36 had been in force at the time of manufacture.
72.34 Detection agents and minimum manufacture concentrations
For the purposes of this Subdivision, the following table defines:
(a) detection agent; and
(b) the minimum manufacture concentration for each detection agent.
Detection agents and minimum manufacture concentrations
1 Ethylene glycol dinitrate (EGDN)(molecular formula: C2H4(NO3)2)(molecular weight: 152) 0.2% by mass
2 2,3‑Dimethyl‑2,3‑dinitrobutane (DMNB)(molecular formula: C6H12(NO2)2)(molecular weight: 176) 1% by mass
3 para‑Mononitrotoluene (p‑MNT)(molecular formula: C7H7NO2)(molecular weight: 137) 0.5% by mass
4 a substance prescribed for the purposes of this table item the concentration prescribed for the purposes of this table item in relation to the substance
72.35 Presumption as to concentration of detection agent
(1) This section applies in relation to a prosecution for an offence against this Subdivision.
(2) If no detection agent can be detected in a sample of a plastic explosive when tested using:
(a) a method generally accepted in the scientific community as a reliable means of measuring the concentration of detection agents in plastic explosives; or
(b) a method prescribed for the purposes of this paragraph;
it is presumed, unless the contrary is proved, that the plastic explosive breaches the first marking requirement.
Note: A defendant bears a legal burden in relation to proving the contrary (see section 13.4).
72.36 Definitions
In this Subdivision:
AFP Minister means the Minister administering the Australian Federal Police Act 1979.
Convention on the Marking of Plastic Explosives means:
(a) the Convention on the Marking of Plastic Explosives for the Purpose of Detection, done at Montreal on 1 March 1991; or
(b) if:
(i) the Convention is amended; and
(ii) the amendment binds Australia;
the Convention as so amended.
Note: In 2006, the text of the Convention was accessible through the Australian Treaties Library on the AustLII website (www.austlii.edu.au).
Department of Defence means the Department that deals with matters relating to defence.
detection agent has the meaning given by section 72.34.
explosive device includes the following:
(a) a bomb;
(b) a grenade;
(c) a mine;
(d) a missile;
(e) a perforator;
(f) a projectile;
(g) a rocket;
(h) a shaped charge;
(i) a shell.
export includes take from Australia.
first marking requirement has the meaning given by subsection 72.33(2).
high explosive means an explosive with a velocity of detonation that is greater than the velocity of sound in the explosive (typically greater than 340 metres per second), and includes the following:
(a) cyclotetramethylenetetranitramine (HMX);
(b) pentaerythritol tetranitrate (PETN);
(c) cyclotrimethylenetrinitramine (RDX).
import includes bring into Australia.
manufacture a substance means any process by which a substance is produced, and includes the following:
(a) the process of transforming a substance into a different substance;
(b) the reprocessing of a substance.
marking requirement has the meaning given by section 72.33.
minimum manufacture concentration has the meaning given by section 72.34.
Minister for Defence means the Minister administering the Defence Act 1903.
plastic explosive means an explosive product (including an explosive product in flexible or elastic sheet form) that is:
(a) formulated with:
(i) one or more high explosives which in their pure form have a vapour pressure less than 10¯4 Pa at a temperature of 25°C; and
(ii) a binder material; and
(b) as a mixture, malleable or flexible at normal room temperature.