4Definitions

4 Definitions

Note: A number of expressions used in this instrument are defined in the Competition and Consumer Act 2010, for the Australian Consumer Law in Schedule 2 to that Act, including the following:

(a) Australian Consumer Law;
(b) consumer;
(c) label;
(d) regulator;
(e) safety standard;
(f) supply.

In this instrument:

50 PAM H3 ATD (short for 50th Percentile Average Male Hybrid III Anthropomorphic Test Device): see clause 1.1 of Schedule 1 (test procedures).

ATD (short for Anthropomorphic Test Device): see clause 1.1 of Schedule 1 (test procedures).

category, of quad bike: see section 5.

European Standard means the European Standard EN15997:2011 COR 2012: All terrain vehicles (ATVs—Quads)—Safety requirements and test methods, published by the Comité Européen de Normalisation.

Note: See also section 7.

general use quad bike means a Type I, Category G or a Type II, Category G quad bike (see section 5).

incorporated: see section 7.

lateral roll stability means the ability for a quad bike to resist tipping over laterally (sideways).

lateral roll stability tag: see section 13.

pitch means a vehicle rolling over longitudinally (longways), either rearwards or forwards.

Note: See also the definition of rollover.

quad bike: see section 5.

quad bike dealer means a person who buys and sells quad bikes in the course of a business carried on by the person.

rollover means a quad bike rolling over laterally (sideways) or longitudinally (longways).

rollover warning: see section 11.

static stability: see clause 1.1 of Schedule 1 (test procedures).

tilt table ratio or TTR: see clause 1.1 of Schedule 1 (test procedures).

TTR: see the definition of tilt table ratio.

type, of quad bike: see section 5.