Commonwealth legislation

CASA EX122/11 - Exemption - to produce a modification or replacement part

RepealedCTH

This Act has been repealed and is no longer in force. It is retained for historical reference.

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

2/10 complexity

This instrument temporarily exempted certain aircraft-parts manufacturers from the usual requirement to hold production approval to make modification or replacement parts for type-certificated aircraft, engines, or propellers. It applied only to manufacturers lacking the standard permissions and only where they used a CASA‑approved production process; the exemption ended in October 2012. It kept parts available while preserving safety via approved manufacturing controls.

JSON API Aviation / CASA instruments

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in CASA EX122/11 - Exemption - to produce a modification or replacement part.

CASA EX122/11 - Exemption - to produce a modification or replacement part

Instrument number CASA EX122/11

I, gregory james hood, Executive Manager, Operations Division, a delegate of CASA, make this instrument under regulation 11.160 of the Civil Aviation Safety Regulations 1998 (CASR 1998).

[Signed Greg Hood]

Greg Hood
Executive Manager
Operations Division

28 October 2011

Exemption — to produce a modification or replacement part

1 Duration

This instrument:

(a) commences on the day of registration; and

(b) stops having effect at the end of October 2012.

2 Application

This instrument applies to each person (a manufacturer) who:

(a) produces a modification or replacement part for sale or installation on a type certificated aircraft, aircraft engine or propeller; and

(b) is not otherwise permitted, under subregulation 21.303 (1) of CASR 1998, to produce the modification or replacement part.

3 Exemption

The manufacturer is exempt from compliance with subregulation 21.303 (1) of CASR 1998.

4 Condition

The exemption is subject to the condition that, in producing the modification or replacement part, the manufacturer must use a relevant process approved by CASA in accordance with:

(a) paragraph 21.305 (e) of CASR 1998; or

(b) subregulation 21.305A (2) of CASR 1998.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 CASA EX122/11 - Exemption - to produce a modification or replacement part