Commonwealth legislation

CASA EX05/08 - Exemption - display of markings and carriage of identification plates

RepealedCTH

This Act has been repealed and is no longer in force. It is retained for historical reference.

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This exemption let Australian owners/operators of fixed‑wing aircraft and helicopters under 5,700 kg that operate only within Australia use alternative marking and identification arrangements instead of the usual rules. It permitted registration marks on the underside of the port wing or across both undersides, required marks to be at least 150 mm high, and substituted the manufacturer’s data plate for standard identification plates. The exemption ran Feb 2008–Jan 2010.

JSON API Aviation / CASA instruments

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in CASA EX05/08 - Exemption - display of markings and carriage of identification plates.

CASA EX05/08 - Exemption - display of markings and carriage of identification plates

Instrument number CASA EX05/08

I, SHANE PATRICK CARMODY, Deputy Chief Executive Officer, Strategy and Support, a delegate of CASA, make this instrument under regulation 11.160 of the Civil Aviation Safety Regulations 1998 (CASR 1998).

[Signed S. Carmody]

Shane Carmody
Deputy Chief Executive
Strategy and Support

31 January 2008

Exemption — display of markings and carriage of identification plates

1 Duration

This instrument:

(a) commences on the day after it is registered; and

(b) stops having effect at the end of January 2010.

2 Application

This instrument applies to Australian fixed wing aircraft and rotorcraft with maximum take-off weight of less than 5 700 kg operating wholly within Australian territory (the aircraft).

3 Exemption

The aircraft is exempt from compliance with the following requirements:

(a) subregulation 45.045 (1) of CASR 1998 to the extent mentioned in Schedule 1;

(b) subregulation 45.145 (1) of CASR 1998 subject to the condition mentioned in Schedule 2;

(c) subparagraph 45.065 (3) (b) (ii) and item 1 of paragraph 45.065 (3) (c) of CASR 1998 subject to the condition mentioned in Schedule 3.

Schedule 1 Extent of exemption

The exemption extends only to display markings on the under surface of the port wing or across the under surface of both wings.

Schedule 2 Condition

The aircraft must carry a manufacturer’s data plate as required by regulation 21.820 of CASR 1998.

Schedule 3 Condition

The minimum height must be 150 millimetres.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 CASA EX05/08 - Exemption - display of markings and carriage of identification plates